REALMADE RM200 True HEPA Air Purifier User Manual

REALMADE RM200 True HEPA Air Purifier

Package Contents

• 1 × Air Purifier
• 1 × True HEPA 3-Stage Filter(Pre-Installed)
• 1 × User Manual

Specifications

Security Precautions

Dear Users:
Hello! Thank you for using the air purifier. In order for you to read this manual and use the air purifier better, the following is our explanation of the symbols in the manual:
Any content with this mark must be absolutely prohibited, otherwise it may cause damage to the air purifier or endanger the personal safety of users.
Any content with this mark, related to product security and users’ safety, must be operated strictly according to the contents of the warning.

• Do not use solvents such as alcohol or thinner to clean your air purifier. Do not run the air purifier when using pesticides, etc.
• Do not put the air purifier in a place where combustible gas is easy to leak, so as to avoid gas leakage and cause fire. Do not use it in flammable, explosive and corrosive gas surrounding.
• Do not pull the power cord when moving or storing.
• Do not touch the power cord plug with wet hands.
• Please supervise and instruct young children to avoid direct operation or touch with the air purifier.
• Do not put your fingers or metal objects into the air inlet, air outlet or other gaps.
• Do not let volatile substances or combustible items, such as cigarettes, float into the air purifier.
• There is an electric control board on the base, please pay attention to waterproof.
• The air in the purifier comes in from the front and out from the top, do not occlude or block the air inlet and outlet.
• Do not use the power cord or plug if it is damaged. Do not touch the power cable with wet hands.
• Check and replace the filter regularly. If the filter is blocked, it will lead to poor air purification, increase the power consumption and breakdown.
• If it is not used for a long time, please turn off the power supply and avoid exposure in the sunlight.
• When moving or maintaining the air purifier, please turn off the air purifier and unplug the power plug.
• If the air purifier break down, stop using it and cut off the power immediately. Then refer to the user manual and troubleshoot at first. If it still doesn’t work, please contact the after-sales personnel to check.

Components Instruction

Preparation Before Using

Install the Filter (Please finish the steps before inserting the power plug into the socket!)

1. Flip the air purifier over. Press and twist the filter cover counterclockwise in the direction of the arrow and remove it.

2. Remove the filter from its plastic packaging.

3. Place the filter back into the air purifier with the handle facing up.

4. Replace the filter cover and twist clockwise to lock.

Operation and Function

• Power Button
• Power on into standby mode, press this button to start the air purifier; repeat the button, stop and enter standby mode.
• Timer Button
• Press this button to cycle through timer options between 2-4-8 hours and the corresponding indicator light will light up.
• Speed Mode Button
• Press this button to select the wind speed at low/Medium/High mode and the corresponding indicator light will light up.
• Filter Reset Button
• When the working time of the air purifier reaches 1500 hours, the indicator light will light up to remind you to replace the filter. Press and hold the button for 3 seconds after the replacement is completed, and then the indicator light will turn off and the filter timer function will restart.

Product Troubleshooting

Precautions for Power Cables

• Do not use power sources other than the rated voltage (110-240V,
  50-60Hz ). (Otherwise it may cause fire, electric shock, etc.)

• Do not process, forcibly bend, pull, twist, or bundle the power cable, or put it near high temperature objects. (Damaged power cable may cause fire, electric shock, etc.)

• Do not load heavy objects or clamp them. (Heavy load may cause fire, electric shock, etc.)

• Do not use the power cable or power plug when it is damaged or inserted into the power socket loosely. (Otherwise it may cause fire, electric shock, short circuit, etc.)

• Do not insert or remove the power cord with wet hands. (Otherwise it may cause electric shock, etc.)
  When moving it, avoid damage to the power cable caused by your feet. (Otherwise it may cause electric shock, heat, fire, etc.)

• Do not replace the power cord without authorization. However, if it is damaged and needs to be replaced, please contact the our maintenance service center for repair.

• The dust on the power plug or socket should be cleaned regularly. (Excessive dust and moisture will cause poor insulation, which may cause fire and electric shock, etc.)

Warning Non-professionals are not allowed to disassemble the machine without authorization to prevent the danger of electric shock. Please unplug the power supply first when replacing or cleaning the filter. If there is a fault, please refer to the troubleshooting solution in the user manual. If it still can not be eliminated, please contact our agent or our company.

Maintenance

Before maintenance of the air purifier, please be sure to turn off and cut off the power supply; Do not insert or remove the power plug with wet hands. In order to use the air purifier for a long time, please maintain it regularly.
Body Once a Month
Please wipe the surface of the air purifier body with a soft cloth; Use a hot damp cloth or neutral detergent to clean it if it is heavily soiled, then wipe with a dry cloth.
Attention

• Do not use overheated water (over 40 degrees).
• This may cause discoloration and distortion.
• Do not use pesticides or other chemical detergents.
• Do not flush the air purifier with water.

Filter
The machine with a filter, do not wash it with water.
It is recommended to replace filter every three months in the conventional indoor surrounding.
The new filter can be purchased from our company or our authorized agent Long time in idle

1. Unplug the power plug.
2. Cover with plastic bag and store in a place with low humidity.
3. Do not store the product upside down. Otherwise, the product may be faulty.

Replace the Filter

Cut off the power supply for any of the following maintenance steps

Remove the PE Bag
Before using the air purifier for the first time, please open the cover plate of the air purifier and take out the filter, and be sure to remove the plastic bag of the filter, otherwise the air purifier will not be able to clean the air properly.  Please keep plastic bags away from infants to avoid accidents when they touch plastic bags.

Clean or Replace the Filter

1. As shown in picture A: Take out the filter in the air purifier.
2. As shown in picture B: Remove the package of new filter.
3. As shown in picture C: Put the new filter into the air purifier and reinstall the filter cover.
4. Plug in and turn it on after replacing the filter. Press the filter button for 3 seconds, the filter indicator light turn off. The filter net is reset successfully.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>