Elecder D18 Wireless Earbuds User Manual

FCC ID: 2AWQU-NANOBUDS
Elder D18
Wireless Earbuds

Thank you for purchasing your new Elecder D18 true wireless earbuds.
We recommend that you spend some time reading this instruction manual in order that you fully understand all the operational features it offers.
Read all the safety instructions carefully before use and keep this instruction manual for future reference.

Safety Rules

1. Charge the earbuds and the charging case at least once every 6 months.
2. Do not store the product at extreme temperatures (below 0℃ or above 45℃).
3. Do not use chemicals or detergents to clean the product.
4. Do not drop or knock the product on hard surfaces.
5. Do not scrape the surface of the product with sharp objects.
6. Do not try to take the product apart.

Specifications

Product Overview

How to Wear?

The correct way of wearing
Put earbuds in the ear and gently rotate until 45° above (as shown below).

Power ON/OFF

Power ON:
When you open the charging case(with battery power inside), it will be powered ON automatically and the blue LED will blink.
When the earbuds L & R are powered OFF after taking out of the charging case, long touch the L & R earbuds button to turn it on and the blue LED will blink.
Power OFF:
When you put the L & R earbuds into the charging case(with battery power inside), close the charging case, and it will be powered OFF automatically.
When the earbuds L & R are powered ON after taking out of the charging case, long touch the L or R earbuds button to turn it off under BT disconnection status.
Note: Under BT disconnection status for more than 5 mins, the L & R earbuds will be powered OFF automatically.

Pairing

Stereo Mode:

1. Take out both earbuds from the charging case, the L&R earbuds will be automatically connected. Blue LED will blink.
2. Activate Bluetooth on the phone and search for “Elecder D18” to connect. Blue LED will blink slowly after connection.

Mono Mode:

1. Take out L or R earbuds from the charging case. Blue LED will blink.
2. Activate Bluetooth on the phone and search for “Elecder D18” for L earbuds Or “Elecder D18 R” for R earbuds. Blue LED will blink slowly after connection.

Multi-Functions

Note: In Mono mode, double-tap L or R can only move to the next song.

Charging Mode

1. Charging the earbuds
   Take earbuds into the charging case

• Charging: Red LED is on

• Full charged: Blue LED is on & turned off after about 30s 2. Charging the case by Type-C cable * Charging: < 30% battery, Red LED is on 30%-80% battery, Orange LED is on 80%-100% battery, Green LED is on

• Full charged: Green LED is off
  Note: 5V/1A or 5V/1.5A is the best choice for the charger.

  3. Charge the case with a wireless charger

Factory reset

In case there is no auto-pairing after taking out the earbuds from the charging case, please follow the below steps to restore the default setting:

1. Ensure L&R disconnects to any device(turn off the Bluetooth device connected before).
2. Turn off both L&R earbuds.
3. Long touch MFB button of L&R earbuds around 8s till both red lights flash 3 times. The factory reset is now finished.
4. The L&R earbuds will be automatically connected and the blue LED will blink. The earbuds are ready to pair with your device now.

EARBUDS MAINTENANCE:

1. Keep the earbuds away from high temperatures and humidity
2. Do not put the earbuds directly in the sun to burst, or put them in a high-temperature environment, which will shorten the life of the earbuds (internal department of electronic components and batteries).
3. Do not try to disassemble the body of the earbud.
4. Do not drop the earbuds on a hard surface.
5. Do not use sharp objects to scratch the surface of the product.
6. Do not use chemicals or detergents to clean the earbuds.

WARRANTY REGULATIONS:

The following conditions are not covered by the warranty:

1. Because of buying second-hand or used products.
2. Damage caused by the irregular operation.
3. Damage caused by natural disasters.
4. Damage caused by chemical substances, open flames, radioactive substances, toxic substances, and liquids.
5. Damage caused by third parties/people/things or others.

WARRANTY AND AFTER-SALES:
If you need after-sales or any help, please contact us by email at “support@elecder.net“, our customer service will reply to you within 24 hours, and we will do our best to solve your problem.
For more information please visit http://www.elecder.net

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the  user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

 http://www.elecder.net

References

• ELECDER – www.elecder.net

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>