RAVEMEN PR1600 Front Light Instruction Manual

RAVEMEN PR1600 Front Light

Technical Specifications

• LED: 2*CREE LEDs with a lifespan of 50000 hours
• Battery: 6000mAh/3.7V rechargeable Lithium-ion battery
• Dimensions (Headlight): 100mm (L)48mm (W)27mm (H)
• Weight (Headlight): 220g
• Materials: The front and main body is made by aluminum with Mil Type III Hard
• Coat Anodizing; the rear part and the handlebar mount are made by durable plastic
• Package includes: front bike light1, handlebar mount1, thick silicone shim1, thin silicone shim1, USB cable1, wireless switch1, CR2032*1

Performance Parameters

Notes:

1. The above data are tested in Lab in line with ANSI/NEMA FL1 standard and may vary by environment and user conditions;
2. Only the low beam will be on in Road Biking mode; Both the high beam and the low beam will be on in Mountain Biking and Emergency modes;
3.  To meet IPX8 waterproof standard, please make sure the tail USB caps are securely mounted before use.

Quick Guide

Mounting Your Light

Select the suitable configuration for your handlebar:

Mount the handlebar mount and adjust the angle for actual needs, then tighten the screw with the hex key provided: (make sure the screw is completely
tightened before riding) Slide the headlight in the right direction to connect with the handlebar mount.  Press and hold the quick release tab and slide out the light.

Secure the wireless switch to the handlebar and control the light remotely:

Attention!

Note: The receiver chip of headlight will switch to sleep mode after the headlight is turned off for 3 days. Under this mode, the headlight cannot be turned on by the wireless switch and the runtime screen will not display CC when used as power bank.
To activate the chip and the screen, press the power button of the headlight to turn the light on.

For your safety, please read this manual thoroughly and use your light accordingly.
Make sure the Light is mounted securely on the handlebar each time before riding.
Release the bike light from the handlebar mount while in the outdoors in case of theft.
To maintain the best performance and extending the life of the Lithium-ion battery:

1. Check the battery and charge the battery up before your first riding.
2. Avoid completely discharging, allow partial discharges and avoid over charging (usually).
3. Keep and storage your light at room temperature.
4. Charge your light to 50% full every 3 months for long term storage.
5. Make two complete charging and discharging cycle to calibrate the led display after long term storage

Battery Charging

Standard charging time: 3.5h (5 V, DC/ 1.8A), approximate values and may vary by user conditions.
The LED display will flash in the form of marquee sign during charging process, and the screen will display number 88 when charging is completed.

Alert!

Don’t stare the light directly when on, otherwise it may cause temporally blindness.
For others’ safety, don’t shine the light(high beam) directly to oncoming vehicles and pedestrians.
Keep the light away out of Children’s reach. And children should be accompanied by adults when using the light.
Don’t disassemble or modify the light, otherwise it may cause danger and void your warranty

Danger!

Lithium-ion battery inside, don’t put the light in a fire, otherwise it may cause explosion!
Please charge the light with qualified USB power adapter, using defective USB power adapter may cause power leakage or fire disaster, etc. Ravemen is not responsible for any of such consequences.

Warranty

We proudly claim and warrant our products free of defects in material and workmanship for 2 years from the day of purchase under normal use. Accessories and spare parts are warranted for 1 year. If a covered defect occurred, return the light to the place of purchase. If this happens within 15 days from the day of purchase, we will replace the defective product with a brand new one without extra charges; After 15 days from the day of purchase, handling and transportation charges shall be borne by person desiring service. Limited lifetime warranty is also available after 2 years warranty period and the cost of service and spare parts will be charged accordingly.

Warranty Exclusions:

1. Warranty Exclusions:
2. Without original sales receipt or proof of the purchase
3. Normal wear and tear and normal battery deterioration
4.  Unauthorized modifications or alterations, improper use and maintenance

Warning:
Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC Statement:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

RF exposure compliance statement:
This device has been evaluated to meet the general RF exposure requirement

Web site: www.ravemen.com
Tel/Fax: +86-755-29064166
Email: service@ravemen.com
Address: 620, 6/F, TaiYangNeng GuiGu Building, Yunfeng road,
Longhua, Shenzhen, China 518109

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>