RAVEMEN CR600 600 Lumens Bike Front Light with Wired Remote Switch User Manual

RAVEMEN CR600 600 Lumens Bike Front Light with Wired Remote Switch

Thanks

Thanks for purchasing Ravemen product. Important: For your safety, read this manual thoroughly before using the product and keep it properly for future reference.

Scan and like our facebook page for more info and service:

Technical Specifications

LED: 1 high-efficiency white LED
Battery: 1600mAh/3.7V rechargeable Lithium-ion battery
Dimensions (Headlight): 82mm (L)29mm (W)32mm (H)
Weight (Headlight): 87g
Materials: The main body is made by anodized aluminum; the rear part and the accessories are made by durable plastic and glass fiber, etc Package includes: front bike light1, silicone rubber band handlebar mount1, USB cable1, wired remote button1, O ring 2

Performance Parameters

Mode

|

Brightness   level

|

Brightness (Lumens)

|

Run Time (hrs)

|

Mix distance

|

Impact
resistance

|

water
resistance

---|---|---|---|---|---|---
Low beam| High| 600| 1.4|

125 meters

|

1 meter

|

IPX6

Mid| 300| 2.4
Low| 150| 4.5
Eco| 50| 11.5
Pulse flashing| 150| 26
Rapid flashing| 50| 33
Emergency| High| 600| /

Note: The above data are tested in Lab in line with ANSI/NEMA FL1 standard and may vary by environment and user conditions.

Quick Guide

Power button: Long press the button 0.5s to turn on/off power; Single click to cycle through brightness levels.

Battery   indicator: Green:>30% power; Red: <30% power; Red flash: low battery, please charge your light soon.

Auto power save mode: When working at the high, mid brightness level and in low battery, the light will reduce the output and switch to power save mode for runtime extension.

Micro USB charging: Standard charging time: 1.5h with max input: 5V, DC/ 1.5A (approximate values and may vary by user conditions). Built-in over- charge protection.

Charging indicator: The red indicator is flashing when charging and turns to constant green when completed.

Wired remote button: When power is on, single click to cycle through brightness levels; Press 0.3s and hold to activate Emergency mode, release to go back to the previous brightness level.

Other features: Intelligent thermal management circuit to prevent overheat of LED; Mode Memory circuit to remember the last used brightness level.

Battery runtime extension

The light can be powered by external power source, such as power bank (Output 5V, 1.5A/2A) to extend the runtime of the battery.

Mounting Your Light

1. Secure the silicone rubber band on the handlebar (check the mount whether it is tightened or not before each riding):
   

2. Slide the headlight in the right direction to connect with the handlebar mount and adjust the angle for actual needs.
   The mount is 10 degree left to right horizontal adjustable.
   

3. Press and hold the quick release tab and slide out the light.
   

4. Plug the wired remote button into the tail Micro USB port and use the O ring to fix it near the grip as below:
   

Attention!

For your safety, please read this manual thoroughly and use your light accordingly.

Make sure the Light is mounted securely on the handlebar each time before riding. Release the bike light from the handlebar mount while in the outdoors in case of theft.

To maintain the best performance and extending the life of the Lithium-ion battery:

1. Check the battery and charge the battery up before your first riding.
2. Avoid completely discharging, allow partial discharges and avoid over charging (usually).
3. Keep and storage your light at room temperature.
4. Charge your light to 50% full every 3 months for long term storage.

Alert!

Don’t stare the light directly when on, otherwise it may cause temporally blindness. For others’ safety, don’t shine the light(high beam) directly to oncoming vehicles and pedestrians.

Keep the light away out of Children’s reach. And children should be accompanied by adults when using the light.

Don’t disassemble or modify the light, otherwise it may cause danger and void your warranty.

Danger!

Lithium-ion battery inside, don’t put the light in a fire, otherwise it may cause explosion!
Please charge the light with qualified USB power adapter, using defective USB power adapter may cause power leakage or fire disaster, etc. Ravemen is not responsible for any of such consequences.

Warranty

We proudly claim and warrant our products free of defects in material and workmanship for 2 years from the day of purchase under normal use. Accessories and spare parts are warranted for 1 year. If a covered defect occurred, return the light to the place of purchase. If this happens within 15 days from the day of purchase, we will replace the defective product with a brand new one without extra charges; After 15 days from the day of purchase, handling and transportation charges shall be borne by person desiring service. Limited lifetime warranty is also available after 2 years warranty period and the cost of service and spare parts will be charged accordingly.

Warranty Exclusions:

1. Without original sales receipt or proof of the purchase
2. Normal wear and tear and normal battery deterioration
3. Unauthorized modifications or alterations, improper use and maintenance

Web site: www.ravemen.com
Tel/Fax: +86-755-29064166
Email: [email protected]
Address: 620, 6/F, TaiYangNeng Gugu Building, Yunfengroad, Longhua, Shenzhen 518109

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>