RAVEMEN TR500 Lumens Bike Tail Light User Manual
- May 15, 2024
- RAVEMEN
Table of Contents
RAVEMEN TR500 Lumens Bike Tail Light
Specifications
- LED: 3*red LEDs
- Battery: 1600mAh/3.7V rechargeable Lithium-ion battery
- Dimensions (light unit): 41mm (L)33mm (W)65mm (H)
- Weight (light unit): 77g
- Package includes: tail light 1, USB cable 1, round seatpost pad 1, aero seatpost pad1, short rubber band 1, long rubber band 1
Product Usage Instructions
Mounting Your Light
Choose the appropriate pad for your seatpost (round or aero) and ensure the
light is securely mounted before riding.
Attention!
Ensure the light is securely mounted before each ride. Remove the light from
the bike when outdoors to prevent theft.
To maintain optimal performance and extend the battery life:
- Charge the battery before the first use.
- Avoid complete discharges and overcharging.
- Store the light at room temperature.
- Charge to 50% every 3 months for long-term storage.
Alert!
Do not disassemble or modify the light as it may be dangerous and void the
warranty.
Hazard!
Do not expose the light to fire as it contains a Lithium-ion battery. Use a
qualified USB power adapter for charging to prevent risks of power leakage or
fire.
FAQs
Q: What should I do if the light’s brightness seems lower than expected?
A: Make sure the light is fully charged. If the issue persists, contact
customer support for further assistance.
Q: How can I adjust the brightness levels on the TR500 rear light?
A: Refer to the product manual for instructions on adjusting brightness
levels based on your preferences and environment.
Note: RAVEMEN TR500 is a very powerful rear light, please select the appropriate brightness in the city to avoid bringing others inconvenience.
Thanks for purchasing Ravemen product.
Important: For your safety, read this manual thoroughly before using the product and keep it properly for future reference.
Scan and like our facebook page for more info and service:
Technical Specifications
- LED: 3*red LEDs
- Battery: 1600mAh/3.7V rechargeable Lithium-ion battery
- Dimensions (light unit): 41mm (L)33mm (W)65mm (H)
- Weight (light unit): 77g
- Package includes: tail light 1, USB cable 1, round seatpost pad 1,aero seatpost pad1, short rubber band 1, long rubber band 1
Performance Parameters
Note: The above data are tested in Lab standard and may vary by
environment and user conditions;
The light will switch to eco mode when in low battery.
Quick Guide
Power button: Long press the button 0.5s to turn on/off power; Single click to cycle through brightness levels. Mode Memory circuit to remember the last used brightness level when on again.
Auto on-off and brake detection mode:
When the light is off, press the power button and hold till the light blinks
quickly, then release the button to activate/deactivate this mode.
In this mode, the light will switch to 200 lumens output for 2s when detecting
braking.
The light will switch off automatically after staying still for 2 minutes and
turn on with a vibration. If you turn off the light manually, the auto-on
function will be deactivated until the light is turned on manually again.
The reaction of the brake sensor may vary on different roads.
Auto power save and low battery indicator
When in low power, the light will switch to eco mode(5 lumens) to save power.
The brake detection function will also be deactivated.
Please charge your light when the yellow indicator light is blinking.
USB C charging
- Standard charging time: 4.5h with Max input: 5V, DC/400mA.
(approximate values and may vary by user conditions). Built-in over-charge protection.
Charging indicator
Blinking blue light during charging and constant blue light when charging
completed.
Mounting Your Light
Choose the round pad or aero pad for your seatpost accordingly.
- Make sure the light is mounted securely before riding.
Mounting Your Light
Choose the round pad or aero pad for your seatpost accordingly.
A Make sure the light is mounted securely before riding.
Attention!
Make sure the light is mounted securely each time before riding.
Release the light from the bike while in the outdoors in case of theft.
To maintain the best performance and extending the life of the Lithium-ion
battery,it’s recommended:
- Check the battery and charge the battery up before your first riding.
- Avoid completely discharging, allow partial discharges and avoid over charging (usually).
- Keep and storage your light at room temperature.
- Charge your light to 50% full every 3 months for long term storage.
Alert!
Don’t disassemble or modify the light, otherwise it may cause danger and void
your warranty.
Danger!
Lithium-ion battery inside, don’t put the light in a fire, otherwise it may
cause explosion!
Please charge the light with qualified USB power adapter, using defective USB
power adapter may cause power leakage or fire disaster, etc. Ravemen is not
responsible for any of such consequences.
Warranty
We proudly claim and warrant our lights free of defects in material and workmanship for 2 years from the day of purchase under normal use. Accessories and spare parts are warranted for 1 year. If a covered defect occurred, return the product to the place of purchase. If this happens within 15 days from the day of purchase, we will replace the defective product with a brand new one without extra charges; After 15 days from the day of purchase, handling and transportation charges shall be borne by person desiring service. Limited lifetime warranty is also available after 2 years warranty period and the cost of service and spare parts will be charged accordingly.
Warranty Exclusions:
- Without original sales receipt or proof of the purchase
- Normal wear and tear and normal battery deterioration
- Unauthorized modifications or alterations, improper use and maintenance
Website: www.ravemen.com
Tel/Fax: +86-755-29064166
Email: service@ravemen.com
Address: 501, Building A, Nankeng 2nd Industrial Park,
Bantian, Longgang, Shenzhen 518129, China
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>