RAVEMEN LR1600 Head Flashy Light User Manual

RAVEMEN LR 1600 Head Flashy Light

WARNING

• Keep button batteries out of reach of children. Never allow children to replace button batteries of any device.
• Swallowing may lead to serious or fatal injury in as little as 2 hours, due to chemical burns and potential perforation of the oesophagus.
• If you suspect your child has swallowed or inserted a button battery, immediately call or take them for emergency medical help.

Advice about the safe disposal of button/coin batteries

• Dispose of used button/coin batteries immediately.
• Place sticky tape around both sides of the battery and dispose of it immediately in an outside bin, out of reach of children, or recycle safely.

Thanks for purchasing Ravemen product.
Important: For your safety, read this manual thoroughly before using the product and keep it properly for future reference.
Scan and like our facebook page for more info and service:

Technical Specifications

LED: 1 high-efficiency white LED
Battery: 4000mAh/3.6V rechargeable Lithium-ion battery
Dimensions (Headlight): 106.5mm (L)34mm (W)37mm (H)
Weight (Headlight) : 181g
Materials : The main body is made by anodized aluminum; the rear part and the accessories are made by durable plastic and glass fiber, etc
Package includes: front bike light1, handlebar mount 1 thick silicone shim1, thin silicone shim1, USB cable1

Performance Parameters

Mode| Brightness level| Brightness (Lumens)| Run Time (hrs)| Max distance| Impact resistance| Water
resistance
---|---|---|---|---|---|---
| High| 1600| 1.5|
Mid| 800| 2.5
Wide beam| Low| 400| 4| 170 meters| 1 meter| IPX6
| Eco| 150| 13|
Pulse flashing| 600| 25.5
Emergency| High| 1600| /

Note: The above data are tested in Lab in line with ANSI/NEMA FL1 standard and may vary by environment and user conditions.

Quick Guide

1. Blue indicator
2. Power button
3. Menu button

First-time Pairing: Turn on the light and place the battery into the wireless switch, then wait 5 seconds. After pairing successfully, the blue indicator will blink 5 times.
If not, try the steps below:

1. Long press the power button of the light for 5 seconds till the blue indicator blinks slowly, then turn off the light;
2. Long press the power button of the light for 5 seconds till the blue indicator blinks quickly;
3. Long press the power button and menu button of the wireless switch simultaneously for 5 seconds to connect with the light. When paired successfully, the blue indicator will turn to slow blinking for 5 times; If not, repeat this step.
4. Click the button of the wireless switch to make sure it works with the light correctly.

Note: The working range between the light and the switch is around 5 meters; After 5 days without operation, the wireless chip of the light will enter sleep mode and disconnect with the wireless switch. Turn on the light and it will connect with the wireless switch automatically.

Power button: Long press the button 0.5s to turn on/off power; Single click to cycle through brightness levels.
Menu button : when the light is on, click to activate emergency mode.
Click again to return to the previous mode.
Intelligent daytime running light mode:
Long press the power button 3.5s until the blue indicator is on to activate this mode. In this mode, the light will switch automatically between pulse flashing level (high ambient light) and low brightness level (low ambient light). The light will also switch off after staying still for 2 minutes and switch on again with a vibration (auto on-off).
To exit this mode, single click any button or turn off the light.

Auto power save mode:

When working at the high/mid brightness level and in low battery, the light will reduce the output and switch to power save mode for runtime extension.

Battery indicator : Green:>30% power; Red: 15%-30% power; Red flash: low battery, please charge your light soon.
USB C charging: Standard charging time: 3.2h with max input: 5V, DC/ 1.5A (approximate values and may vary by user conditions).
Built-in over-charge protection.
Charging indicator: The red indicator is flashing when charging and turns to constant green when completed.

Other features : Intelligent thermal management circuit to prevent overheat of LED; Memory circuit to remember the last used brightness level.

Battery Runtime Extension

The light can be powered by external power source, such as power bank (Output 5V, 1.5A/2A) to extend the runtime of the battery.

Mounting Your Light

1. Select the suitable configuration for your handlebar:
   Place the thick silicone shim inside the handlebar mount

Place the thin silicone shim inside the handlebar mount

2. Mount the handlebar mount and adjust the angle for actual needs, then tighten the screw with the hex key provided:
   (make sure the screw is completely tightened before riding)
   

3. Slide the headlight in the right direction.
   

4. Press and hold the quick release tab and slide out the light.

Attention!

For your safety, please read this manual thoroughly and use your light accordingly.
Make sure the Light is mounted securely on the handlebar each time before riding.
Release the bike light from the handlebar mount while in the outdoors in case of theft.
To maintain the best performance and extending the life of the Lithium-ion battery:

1. Check the battery and charge the battery up before your first riding.
2. Avoid completely discharging, allow partial discharges and avoid over charging (usually).
3. Keep and storage your light at room temperature.
4. Charge your light to 50% full every 3 months for long term storage.

Alert!

Don’t stare the light directly when on, otherwise it may cause temporally blindness.
For others’ safety, don’t shine the light directly to oncoming vehicles and pedestrians.
Keep the light away out of children’s reach and children should be accompanied by adults when using the light.
Don’t disassemble or modify the light, otherwise it may cause danger and void your warranty.

Danger!

Lithium-ion battery inside, don’t put the light in a fire, otherwise it may cause explosion!
Please charge the light with qualified USB power adapter, using defective USB power adapter may cause power leakage or fire disaster, etc. RAVEMEN is not responsible for any of such consequences.

Warranty

We proudly claim and warrant our products free of defects in material and workmanship for 2 years from the day of purchase under normal use. Accessories and spare parts are warranted for 1 year. If a covered defect occurred, return the light to the place of purchase. If this happens within 15 days from the day of purchase, we will replace the defective product with a brand new one without extra charges; After 15 days from the day of purchase, handling and transportation charges shall be borne by person desiring service. Limited lifetime warranty is also available after 2 years warranty period and the cost of service and spare parts will be charged accordingly.

Warranty Exclusions:

1. Without original sales receipt or proof of the purchase
2. Normal wear and tear and normal battery deterioration
3. Unauthorized modifications or alterations, improper use and maintenance

Customer Support

Website: www.ravemen.com
Tel/Fax : +86-755-29064166
Email: service@ravemen.com
Address: 501, Building A, Nankeng 2nd Industrial Park, Bantian, Longgang, Shenzhen 518129, China

References

• RAVEMEN

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>