TUOSI TS-T7 True Wireless Stereo Earbuds User Manual

TUOSI TS-T7 True Wireless Stereo Earbuds

How to wear

Choose suitable Earcaps.

Adjust the earbuds until you feel comfortable.

How to take out

Open the cover of charging case , Take the earbuds out directly

How to use

How to pair

Compatible with Bluetooth V2.1+EDR or above devices. Use two earbuds together Smart connection

1. Open the cover of the charging case (the earphone is in the charging case).
2. Open the Bluetooth function of the mobile phone and search for the name “V98”, click connection “V98”, after the pairing successfully, then take out the headset to use.

Use single earbud

1. Take out one of earphones, and then close the charging case.
2. The headset lights blue first, and then triple-tap  the headset touch area until the headset indicator “alternately flashes red and blue” to enter pairing mode.
3. Turn on the mobile phone’s Bluetooth function to search and connect to “V98”, at this time a single headset can be used.

Use after first time

After the second use (the earphone is in the charging box), only need to open the charging box, which can be automatically connected to the mobile phone to use (you must ensure that the Bluetooth function of the mobile phone is turned on)

Button functions

In Working status：

• Long press on the touch area for 5 seconds voice prompt “Power off”.
• Double-click on an incoming call to answer the call, click on the call to end the call.
• Press and hold for 2 seconds until the beep sounds,you can reject the call.
• Triple-tap the touch area until Siri opens Siri.
• When music is playing, short press to pause/play music.
• Next song: Right (R) headset long press 2 seconds touch area.
• Volume up: right (R) headset quickly “double-click” the touch area.
• Previous song: Left (L) headset long press 2 seconds touch area.
• Volume reduction: Left (L) headset quickly”double-click” the touch area. L
• When two headphones are used at the same time, turn off one of the headphones, the other headphones can still be used normally.
• The headset supports manual power on/off, long press the touch area for about 3 seconds to turn on, long press the touch area for about 5 seconds to turn off.

Charging way

Earbuds and charging case are with built in rechargeable battary,Can not be dis-assembled ,Pls make sure the earbuds and case are fully charged before using it for first time.
Charge the case

• Connect the USB charging cable to the charging socket on the charging box of the headset. Connect the charging cable plug in the standard USB5V output power supply. During the charging process, the single digit of the charging box digital tube flashes.
• When the charging box is fully charged, the charging box’s digital tube displays “100” to indicate that it is fully charged. Unplug the charging cable from the power socket.
• When the charging case is low, the digital tube display “15” flashes.

Charge the earbuds

• Put the left (L) and right (R) earphones into the charging case. The left (L) and right (R) earphone indicator lights in solid red to enterthe charging state (the charging indicator of the charging box is always on).
• When the left (L) and right (R) headsets are fully charged, the indicator light will go out and the charging box will automatically turn off the power.
• When the headset is low on power, the headset will beep at intervals, “please charge”, and the indicator will flash red at intervals. If the headset is turned off at low power during a call, it will automatically transfer the call to the phone.

Accessories:

• V98 earbuds * 1sets
• Big and small ear caps * 2 pairs
• User manual * 1pcs
• Charging cable * 1pcs

Potential problems

Earbuds Re-pairing methods

Take both earbuds out from charging case at the same time.Double click touch area of both earbuds simultaneously，Red&blue light of both earbuds will flash. If left earbud or right earbud flashs Red&blue alternatively, The earbuds paired successfully.

Warning

1. Do not place device in very low or high temperature environment,In extreme temperature environment, earbuds may transform, Battery capacity may decrease, earbuds lifetime may be shorten.
2. Do not use earbuds in storm, The earbuds may be broken and will increase the risk of lightening stroke.
3. Do not disassemble or refit the earbuds for any reason, it make broken or  born the earbuds, Please send it to sales agency to repair.
4. Only those USB charging cable qualified by us can be used, Use unqualified USB cable or charger may broke the earbuds and may cause  explosion in extreme situations..It will also makes warranty invalid.
5. Repeated charging and discharging will make the battery performance reduced after sometime, this is normal for all rechargeable batteries.
6. Pls put the items and accessories to the places which can not be touched by kids or pets to avoid any unexpected accidents.

Product parameters

FCC STATEMENT

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>