Gainsborough QFL5610NI 3 Light Natural Iron Flush Mount User Manual
- June 4, 2024
- GAINSBOROUGH
Table of Contents
User Manual
CARE & MAINTENANCE
Do not use any harsh abrasives, polishes, or chemicals. Do not wash any parts in the dishwasher.
SHADES
Fabric Shades
Use a fine brush or a lint remover on your lampshade to remove the accumulated
dirt and dust. If necessary, you may use a white cloth dampened with a mild
solution of soapy water to wash the shade gently and evenly. Rinse thoroughly
with a white cloth dipped in clean water. The shade should be allowed to dry
quickly, preferably in the sun or by using a hair dryer. You may also use a
home dry cleaning product.
Glass Shades
Use a clean, soft cloth to wipe your shade. If necessary (for clear glass
only), you may use a white cloth dampened with a mild solution of soapy water
to gently wash the shade. Rinse thoroughly with a white cloth dipped in clean
water. A mild glass cleaner may also be used. If the glass has a finish other
than clear, do NOT use any cleaner or water, instead use a soft feather duster
to gently remove dust; be careful to not remove the finish on the glass.
Mica Shades
Use a clean, soft cloth to wipe your shade. If necessary, you may use a white
cloth dampened with a mild solution of soapy water to gently wash the shade.
Rinse thoroughly with a white cloth dipped in clean water. A mild glass
cleaner may also be used.
Scavo Glass (heavily textured) Shades
Use a clean, soft cloth to wipe your shade, using very light pressure. Do not
rub hard as the texturizing materials may wear off. If necessary, you may
detach the shade and soak it in warm, soapy water for 5 minutes and rinse
thoroughly. Dry completely before reattaching.
Tiffany Art Glass Shades
Use a clean, soft cloth to wipe your lamp. Cleaning products containing
ammonia should not be used as it can affect the finish on the solder. Solder
is a metal that can oxidize (tarnish), which results in a white film on the
solder. This can be removed and prevented with a light coating of lemon oil.
BASES
Brass Bases
Our brass bases are lacquered to prevent tarnishing; therefore, using a brass
cleaner is not necessary. To maintain the finish, use a clean, soft cloth to
wipe your lamp.
Crystal Bases & Accents
To maintain the brilliance of the crystal, use a clean, soft cloth to wipe it
down gently. You may also use a crystal-cleaning spray available on the
market.
Leather Bases
Keep leather out of direct sunlight. Use a clean, soft cloth to wipe your
lamp. You may use a leather conditioner if needed.
Metal Bases (Aluminum, Iron, etc.)
Use a clean, soft cloth to wipe your lamp. Solid metal bases can be polished
with lemon oil.
Porcelain Bases
Use a clean, soft cloth to wipe your shade. If necessary, you may use a white
cloth dampened with a mild solution of soapy water to gently wash the shade.
Rinse thoroughly with a white cloth dipped in clean water.
Resin or Painted Bases
Use a clean, soft cloth to wipe your lamp. You may also dampen the cloth with
a mild solution of soapy water. Rinse thoroughly with a white cloth dipped in
clean water.
Wood Bases
Use a clean, soft cloth to wipe your lamp. You may also use lemon oil to
restore its luster.
MIRRORS
Use a clean, soft cloth dampened with a mild solution of vinegar and water to wipe the glass clean starting from the center. Window cleaners containing ammonia should not be used.
OUTDOOR FIXTURES
Use a clean, soft cloth to wipe down the fixture. A glass cleaner may be used on the glass. To help preserve the finish a high-quality car wax may be applied to the metal twice a year.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>