Lenoxx PDVD800 9 Swivel Portable DVD Player Instruction Manual
- June 5, 2024
- lenoxx
Table of Contents
- Lenoxx PDVD800 9 Swivel Portable DVD Player
- IMPORTANT SAFETY INSTRUCTIONS
- Features
- Disc Installing
- PACKAGE CONTENTS
- Front /Rear Panel
- REMOTE CONTROL
- PANEL KEYS
- Battery Installation and replacement
- KEY FUNCTIONS
- GENERAL SETUP
- Menu Operation
- GENERAL SETUP PAGE
- AUDIO SETUP PAGE
- DOLBY DIGITAL SETUP
- DOLBY DIGITAL SETUP
- SYSTEM SETUP
- PASSWORD SETUP PAGE
- PLAYBACK
- SPECIFICATIONS
- TROUBLESHOOTING
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Lenoxx PDVD800 9 Swivel Portable DVD Player
IMPORTANT SAFETY INSTRUCTIONS
WARNING
- When using electronic equipment, basic safety precautions should be followed, including the following:
- To reduce the risk of electric shock, fire or injury to persons:
- Read all instructions before using the unit.
- Use this unit only for its intended use as described in this manual.
- Do not operate this unit if it has a damaged cord or plug, is not working properly or has been damaged or dropped. If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard.
- Do not allow children to use the unit without supervision.
- Liquids and foodstuffs must not be spilled or dropped into the unit.
- It is hazardous for anyone other than a trained person to carry out any service or repair operation.
- This unit is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the product by a person responsible for their safety.
- Children should be supervised to ensure that they do not play with the unit.
- Never leave the product unsupervised. Switch off the product when it is not in use, even if this is only for a short while.
- The unit must be free-standing. It must not be placed in a cabinet.
- The temperature of accessible surfaces may increase when the unit is operating.
- This unit is not intended to be operated by means of an external timer or separate remote control.
- If smoke is emitted, switch off and unplug the unit immediately.
- Cleaning: Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a slightly dampened cloth for cleaning and immediately wipe dry.
- Attachments: Use only attachments recommended by the manufacturer. Use of other attachments may be hazardous.
- Water and Moisture: Do not use this product near water (e.g., near a bath tub, washbowl, kitchen sink, laundry tub, in wet basements, or near a swimming pool and the like).
- Ventilation: Slots and openings in the cabinet are provided for ventilation to ensure reliable operation of the product and to protect it from overheating. These openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surface. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided.
- This unit must not be exposed to dripping or splashing and objects filled with liquids, such as vases, must not be placed on the apparatus.
- Replacement Parts: When replacement parts are required, be sure that your service technician has used replacement parts specified by the manufacturer or that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards.
- Safety Check: Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to ensure that the product is in proper operating condition.
- Overloading: Do not overload wall outlets, extension cords, or integral convenience receptacles as this may cause a fire or an electric shock.
- When the AC/DC adapter is used as the disconnect device, the disconnect device must remain readily operable. To completely disconnect the power input, the AC/DC adapter must be completely disconnected from the mains.
Features
- High-definition TFT LED screen
- Headphone jack
- USB/MMC/MS card slot – Max capacity 32GB
- Compatible with DVD,VCD,CD,Mp3,CD-R,DVD-RW,JPEG,Kodak Picture CD, DIVX, etc.
- Supports playback control : play, pause, fast forward playback, fast rewind playback ,etc
- Two optional aspect ratios 16:9 and 4:3
- Working voltage : DC9-12V
PRECAUTIONS AND WARNINGS
- Placement :
- To prevent fire or shock hazard, do not expose this appliance to rain or moisture.
- Do not expose this appliance to direct sunlight.
- Keep this appliance away from strong magnets, heat sources and excessive dust.
- Do not place this appliance on an unstable surface.
- If the unit is brought directly from a cold place to a warm one, moisture may condense inside the unit and cause a malfunction. If this occurs leave the unit turned on for a few hours until the moisture evaporates.
- Installation:
- Ensure that the portable DVD player is installed according to the instructions and illustrations provided in this manual.
- Caution:
- Do not drop any objects into the unit through the openings.
- Do not spill or spray liquid of any kind on or in the unit (this may result in a fire or electric shock).
- Do not place anything heavy on the unit.
- To ensure proper ventilation and proper operation, never cover or block the slots and openings with a cloth or other materials.
- Keep the unit away from open flames such as fire, candles etc.
- Install the batteries correctly as incorrect replacement is hazardous.
- Dispose of batteries in accordance with local regulations.
- The maximum working temperature is 95 degrees fahrenheit or 35 degrees celsius.
- No Disassembling:
- Never attempt to disassemble the unit as this is very dangerous and may cause an electric shock and/or harm from exposure to the laser beam.
- Please refer all servicing and maintenance to an authorised service centre.
- Cleaning unit:
- When cleaning ,please make sure the unit is unplugged from the power source.
- Do not use chemicals or detergents when cleaning.
- Use a soft cloth lightly dampened with water to clean the exterior of the unit only and immediately wipe dry.
Disc Installing
- Do not leave disa near heat sources, in direct sunlight. or in high humidity.
- Store discs in their cases when they are not being used.
- Stacking discs or .minding them at an angle without putting them in the use the disc to Wllrp.
- Do not touch the disc surmise when h1ndling I disc; hold it by the edges.
- Fingerprints, dust, dirt or sc111tches on the diK picture or reduce sound AIWll}’S h1ndle carefully and make sure discs are dNn before use.
- Do not stlckp1perortapeontothedlsc.
- Do not write discs with a marker etc a.soft cloth,m the flare outwards.
- Do not use solvents such as benzene, not Intended for CDs or anti·statlc spray Intended, as these may damage your disc.
PACKAGE CONTENTS
- AC ADAPTOR
- REMOTE CONTROL
- AV CABLE
- CAR CHARGER
- INSTRUCTION MANUAL
- WARRANTY CARD
Front /Rear Panel
- OPEN
- VOL-
- VOL+
- MODE
- TFT(Screen) ON/OFF
- SETUP
- MENU
- PRE
- DVD/USB/SD
- FWD
- OK
- NEXT
- REW
- STOP
- DC-IN
- POWER ON/OFF
- AV IN
- AV OUT
- EARPHONE SOCKET
- SD/MMC CARD SLoT
- USB PORT
REMOTE CONTROL
- MUTE
- POWER
- 0-9, 10+ NUMBERS
- VOL+
- VOL
- MENU
- SLOW
- STOP
- REPEAT
- A-B
- PBC
- Z0OM
- MODE
- SD/USB
- TITLE
- SUBTITLE
- AUDIO
- RETURN
- GOTO
- UPA
- LEFT
- RIGHT
- PLAY ENTER
- PAUSE lI
- DOWN
- FWD
- REV
- NEXT
- PREV
- SETUP
- LCD MENU
- PROG SEARCH
- COPY
- OSD
PANEL KEYS
Common key functions on the panel:
- Menu
- Press to return to the root menu for DVD.
- Stop
- Press to suspend current broadcast.
- Play/Pause
- Press once to pause play, press again to resume.
- Setup
- Press to enter the setup menu,then use the direction keys and OK to set the system menu.
- USB/CARD
- Press repeatedly to switch input source: Disc/ SD card/USB mode
- Direction Keys
- Use direction keys for: Previous/Next/Fast forward/ Fast rewind
- OK
- Press to enter the selected item or choice.
- Open
- Press to open the door.
Battery Installation and replacement
- Unscrew battery cover and remove.
- Properly dispose of exhausted batteries.
- Insert 2 new AAA batteries.
- Be sure the positive(+) and negative () ends of the batteries are facing the correct direction.
- Replace the battery cover.
- Do not mix old and new batteries.
- Do not mix alkaline,standard (carbon-zinc) or rechargeable (nickel-cadmium) batteries.
KEY FUNCTIONS
Note: Some of the following buttons are only on the remote, some are only on the unit and some are on both the unit and the remote.
GENERAL SETUP
CHARGING THE UNIT
This player is powered by a lithium-polymer battery. It features a high ratio of energy to weight. It has no memory effect and it can be recharged at any time regardless of whether it is fully or partially discharged. It takes about six hours to fully charge the battery and a fully charged battery can beused for up to two hours. Connect the attached AC/DC adaptor to the DC INPUT jack on the unit, then plug the adaptor into a 240V AC outlet. Note: Make sure to switch off the unit before charging. The charging indicator LED will change from RED to GREEN to indicate that the battery has been fully charged.
Usage and Maintenance of the rechargeable battery.
- The working temperature of the rechargeable battery ranges from 0 °C to 45 °C
- Always unplug the unit when it is not being used unless it is being charged.
- Heat is inevitably produced during playback, this is normal. However switch off and allow it to cool down.
- Avoid banging the battery and keep it away from heat and moisture.
CONNECTING TO THE TV
This unit can be connected to a TV in order to enjoy high quality music,
movies etc with a TV. Use an AV cable to connect the AV OUT jack on the unit
to the AV IN jack of a TV. DVD player has sound and video input jacks for
connecting external audio and video inputs.
Menu Operation
- Press [SETUP] on the remote control or on the unit to show the setup menu.
- Press [LEFT]/ [RIGHT] to select an item. The submenu of the selected item will be instantly shown.
- Press [UP/ [DOWN] to select an item in the submenu, then press [OK]/[ENTERI/[RIGHT] to enter.
- Use [UP) /TDOWN] to select an option, then press [OK]/[ENTERI to confirm or press [LEFT] to cancel.
- Press [UP/{DOWN] to continue to set other items in the submenu.
- Press [LEFT] to go back to the superior menu of the current one.
- Press [SETUP] again and press [ENTERI/[OK] to exit the setup menu.
GENERAL SETUP PAGE
There are six items in the GENERAL SETUP PAGE. They are TV DISPLAY, ANGLE
MARK, OSD LANGUAGE, CAPTIONS, SCREEN, SAVER and LAST MEMORY.
TV DISPLAY
PAN SCAN
If the unit is connected to a conventional TV set, a wide-screen image will be
displayed on the screen in its native aspect ratio with some part on the left
and right cut of.
LETTERBOX
If the unit is connected to a conventional TV set, a wide-screen image will be
displayed in its native aspect ratio with black borders on the top and on the
bottom.
WIDE
Select this option if the unit is connected to a wide-screen TV set. A wide-
screen image will be displayed in full screen in its native aspect ratio while
the 4:3 image will be stretched out horizontally to fit the screen.
ANGLE MARK
Set this item to ON. When a disc encoded with multiple camera angles is
playing.the angle mark will display on the screen. View different video camera
angles by pressing [ANGLE] on the remote control. Set this item to OFF to
disable this function. NOTE:This function only works if the disc is encoded
with multiple camera angles.
OSD(on-screen display)language
Set the on-screen display language in this item.
CAPTIONS
Set this item to ON to show closed captions on a disc that has been encoded with closed captions. Set this item to OFF to hide. You can also press [SUBTITLE] on the remote control to show or hide the closed captions. NOTE:This function only works if the disc is encoded with closed captions.
SCREEN SAVER
ON: If the image remains motionless on the screen, for example the disc is
paused, stopped etc. for several minutes, a screen saver will appear on the
screen. Press any key or button to wake it up. OFE: Disable the screen saver
function.
LAST MEMORY
ON: Each time you turn off the unit or stop the disc, it will memorize the last play time. Next time you turn on the unit and play the same disc, the unit will play from that memorized point. OFF: Disable the last memory function.
AUDIO SETUP PAGE
SPEAKER SETUP
DOWNMIX
LT/RT:The 5.1-channel audio is mixed into left channel and right channel and
is output via the FL and FR speaker respectively. STEREO: The 5.1-channel
audio is mixed into stereo signal and is output via the FL and FR speaker.
NOTE: This function only applies to Dolby AC-3 encoded 5.1-channel discs.
DOLBY DIGITAL SETUP
DUAL MONO
- STEREO :The player outputs the left-channel audio and right-channel audio via the FL and FR speaker respectively.
- L-MONO: The player outputs the left-channel audio only via both the FL and FR speaker.
- R-MONO: The player outputs the right-channel audio only via both the FL and FR speaker.
- MIX-MONO : The player outputs the average signal of the left-channel and right-channel audio via the FL speaker and the FR speaker.
DOLBY DIGITAL SETUP
DUAL MONO
- STEREO: The player outputs the left-channel audio and right-channel audio via the FL and FR speaker respectively.
- L-MONO:The player outputs the left-channel audio only via both the FL and FR speaker.
- R-MONO:The player outputs the right-channel audio only via both the FL and FR speaker.
- MIX-MONO:The player outputs the average signal of the left-channel and right-channel audio via the FL speaker and the FR speaker
VIDEO SETUP PAGE
-
* This menu is used to set up the picture quality of the unit.
- QUALITY
- Adjust items according to your personal preference.
- SHARPNESS
- There are three options (HIGH, MEDIUM and LOW) for you to choose in this item.
- BRIGHTNESS, CONTRAST, GAMMA, HUE, SATURATION, LUMA DELAY
- Enter an item and use the direction keys [LEFTI/[RIGHT] to adjust the value, then press [ENTER] to confirm.
SYSTEM SETUP
- PREFERENCE SETUP
- If there is no disc in the disc tray, the disc tray is open or the disc in the disc tray is stopped, this item is available.
- PBC ( Play Back Control
- ON: Activate the PBC function. When playing a disc encoded with PBC function such as VCD 210, SVCD etc, press [MENUJ to return to the PBC menu. OFF: Disable the PBC function. NOTE: This function only works with those discs encoded with PBC function such as VCD 2.0, SVCD etc. NDVD,VCDI 1,CD-DA and MP3 disc have no PBC menu.
- AUDIO, SUBTITLE and DISC MENU
- Select a preferred audio language, subtitle language and disc menu language in these items. You can also change the audio language by pressing [AUDIO] and the subtite language by pressing [SUBTITLE] on the remote control. NOTE: If the selected languages in these items are not available for the currently playing disc, the disc will be played in the default settings.
- PARENTAL
- This item alows the user to set a maximum rating for the movies that can be viewed. Movies rated higher than the level set for the parental lock cannot be viewed without inputting the correct password. To reset the level, the corect password must be entered. The default password is 136900.
- NOTE: This function only works for discs that have parental control function.
- DEFAULT
- Press to restore the default settings except the settings in the PASSWORD setup page and the PARENTAL item.
PASSWORD SETUP PAGE
- PASSWORD MODE
- Switch password function ON/OFF NOTE: Key in the correct password and press [ENTER] before you change the option in this item. The default password is 136900.
- PASSWORD
- Rest the password. NOTE: The default password (136900) is always active even if the password has been reset.
PLAYBACK
- After all the connections are correctly made, switch on the unit.
- Loading and Playing a Disc
- A. After connecting power to the unit ,set the power switch to the ON position.
- B. Push[ OPEN] to open the disc tray. Place a disc in it with the label side facing up.
- Close the disc tray. The unit will load the disc and start playing.
- MP3/DIVX Disc Playback
- After the unit loads a MP3/DIVX disC, a menu showing the contents of the disc will display on the screen.
- Press the direction key [UP]/[DOWN] to selecta nle or a folder.
- Press [OK] to enter the selected folder. The file or the folder in it will be listed instantly.
- Press [OK] to begin to play the selected file.
- When the disc is stopped press [LEFT] to return to the superior menu.
KODAK Picture CD Playback
- Place a Kodak picture CD in the disc tray and the unit will load the disc automatically.
- Press [B) to display the menu showing the contents of the disc.
- In the menu, use the direction keys [UPI/[DOWN] to select a picture, then press [ENTERI/ to start the playback from the selected picture.
- [GOTOJ: Press this button, then use the digit keys to select a picture and playback from the selected picture begins.
- Press to pause the playback; press it again to resume the playback.
- Pressto begins à playback or resumes playback.
- [REPEAT) : Press repeatedly to switch the repeat modes (Single-Repeat One-Repeat Folder Folder-Cancel repeat).
- TKOH: Press to skip to the previous /next picture during playback.
- [Leftl/[Right| (on the remote control: Press to rotate the picture counterclockwise/clockwise during playback.
- ZOM]: During playback, press [Zoom] repeatedly to zoom in/out of the picture or to return to the original size. When the picture is zoomed in ,the direction keys can be used to move the picture.
USB STICK &SD/MMC CARD PLAYBACK
Note: The max size USB stick or MMC card is 32GB. Insert a U-drive or a card reader into the USB port. Press [SOURCE SELECT] to select USB mode to play the readable files in it. Insert a SD/MMC card into the SD/MMC card port. Press (source SELECT) to select MCR mode to play the readable files in it.
DIVX Playback
DIVX is a video (movies and video) recording format which is commonly known as
AVI. DIVX disc features high quality that is comparable with DVD’s and has
larger capacity. For example:
1.5H movie | In MPEG-1 /2 format | In DivX |
---|---|---|
DVD(MPEG-2) | About 1.5-2GB | About 600-800MB |
VCD (MPEG-1) | About 800MB-1G | About 600-800MB |
Difference between MPEG 1, MPEG 2
| MPEG 1| MPEG2|
---|---|---|---
Speed(kb/s)| 1380kb/s(352*288)| 6500kb/s|
Quality| Good| Excellent|
Hardware| Low| Medium|
SPECIFICATIONS
Compatible discs | DVD/CD/MP3/DIVX |
---|---|
Frequency response | 20HZ to 20KHZ |
Video output | 1 Vp-p75 Ohm unbalanced |
Audio output | 1.4V Rms/ 10 K Ohm |
Dynamic range | Better than 85dB |
Laser | Semi-conductor laser, Wavelength: 650 |
Power source | DC9-12V |
Operating temperature | 5-40 |
Battery type | Li-polymer |
TROUBLESHOOTING
Symptom | Solution |
---|---|
No sound or distorted sound | Make sure your DVD is connected properly and all |
cables are securely inserted into
the appropriate jack.
Cannot advance through a movie| You can not advance through the opening
credits and warning information that appears at the beginning of movies
because the disc is programmed to prohibit that action.
The icon appears on screen| The feature or action cannot be completed at this
time because:
1. The disc software restricts it
2. The disc software does not support the feature
3. The feature is not available at the moment
Picture is distorted| The disc might be damaged. Try another disc.
It is normal for some distortion to appear during forward or reverse scan.
No forward or reverse scan| Some disc have a section that prohibits rapid scanning or title and chapter skip. The movie is often programmed to prohibit skipping through the warning information and the credits at the beginning of a movie.
The player breaks down when a U drive or memory card is inserted into the player
|
The connected U drive or the memory card is probably not an original version. The player cannot play a U drive or memory card of a non-original version.
If the player breaks down, turn it off and unplug it from the power supply. Reconnect it to the power supply and switch it on again. The player will resume normal status.
WARRANTY EXCLUSIONS
- The warranty will not be valid if:
- The product has not been installed, operated or maintained in accordance with the manufacturers operating instructions provided with the product.
- The product has been used for purposes other than its intended function.
- The product has been used for purposes other than household use.
- The damage or malfunction of the product is caused by any of following conditions:
- Incorrect voltage
- Accidents (including liquid or moisture damage)
- Misuse or abuse of the product
- Faulty or improper installation
- Mains supply problems including power spikes or lightning damage
- Infestation by insects
- Tampering or modification of the product by persons other than authorised service personnel
- Exposure to abnormally corrosive materials
- Insertion of foreign objects into the unit
- Please refer to and heed all warnings and precautions in the User Manual.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>