LENOXX GK229 Children’s Pedal GO-Kart Instruction Manual

LENOXX GK229 Children’s Pedal GO-Kart

Assembly Instructions

Styles and color may vary.
The owner’s manual contains important safety information as well as assembly. Please read the assembly manual carefully before operating
The Ride-on Car must be assembled by an adult only.
Keep the package away from children and dispose of properly before use.
Always wear a helmet when riding
Keep this manual for future reference.

WARNING

Adult supervision is required. Do not drive anywhere dangerous including slopes with more than 10 degrees, streets, next to bodies of water and away from other obstacles. The driver must sit on the seat to drive. Read the instruction manual and acknowledge it before use.

1. Adult supervision required
2. Read the instruction manual and instruct the child user
3. The weight limit is 25kg
4. Only one rider to use at the one time
5. Please wear a bike helmet when riding
6. Sit straight on the seat when riding
7. Ride only on flat surfaces
8. Ride away from other vehicles and bodies of water
9. Wear shoes when riding
   Suitable age| 37-96Months| Battery| ———————–
   ---|---|---|---
   Load capacity| 25KGS| Size of car| 946351CM
   Speed| 3-5km/h| Power way| ————————
   Charge| ———————————–| Average battery life| ————————
   Charge time| ————————| Fuse| ————————

PART LIST

Screw Packing

PART DIAGRAM

Before You Begin Assembly

WARNING

FOR THE SAFETY OF YOUR CH ILD, PLEASE READ ALL WARNINGS AND ASSEMBLY/ USE INSTRUCTIONS.KEEP THIS GUIDE FOR FUTURE REFERENCE.

• ADULT ASSEMBLY REQUIRED. The product contains small parts, which are for adult assembly only. Keep child ren away when assembling.
• Always remove protective material and poly bags and dispose before assembly.
• Assembly tools required:

WARNING:

Warning: Children could be injured by sharp edges, sharp angles, small components or electrical components. Take care when assembling or disassembling the motor tricycle. Keep the components and battery out of reach of children.

ASSEMBLY STEPS

Attach the tube:

1. Fit the left and right support to the car.（please see the picture about the left and right）
2. Tighten six Ø5×35 screws to secure it with a screwdriver.

Attach the front panel and direction rod: First insert washer on to direction rod, then insert direction rod from bottom side to car body according to picture, secure front panel to car stand tube. Last, place a sticker on front panel

Attach the steering wheel
Insert the bolt through the steering wheel and steering column and tighten the screw.

Attach the seat
Insert the seat into car body and tighten the screws.
Note: Seat can be adjusted.

Attach the front bumper
As per picture, please take out three 4*12 screws from the car body and insert the front bumper to the car body then tighten the screws.

USE SAFETY

WARNING:

PREVENT INJURIES AND DEATHS:

• NEVER LEAVE CHILD UNATTENDED. DIRECT ADULT SUPERVISION IS REQUIRED.
  Always keep the child in view when child is in the vehicle.

• This toy should be used with caution since skill is required to avoid falls or collisions causing injury to the user or third parties.

• Protective equipment should be worn.

• Never use in roadways, near cars, on or near steep inclines or steps, swimming pools, or other bodies of water.

• Always wear shoes.

• Always sit on the seat.

• Not to be used in traffic.

• This toy is unsuitable for children under 37 months due to its maximum speed; Maximum user weight is 25 kgs.

• This toy has no brake.

• Keep Children Within Safe Riding Areas:

  • Never use in the roadway, near motor vehicles, on lawn space, on or near steep inclines or steps, swimming pools, or other bodies of water;

• Use the toy only on flat surfaces. Such as inside your house, garden or playground.

• Never use in the dark. A child could encounter unexpected obstacles and have an accident.
  Operate the vehicle only in the daytime or in a well-lit area.

• Do not let any child touch the wheels or be near them when the car is moving.

• This vehicle has adjustable play seat belts. Please instruct children on how to tie the safety belt before using, it and guarantee security.

MAINTAINING

• It is the parents’ responsibility to check the main parts of the toy before using it, Must regularly examine for potential hazards, such as screws are fastening enclosure of other parts and in the event of such damage, the toy must not be used until that damage had been properly removed.

• Make sure the plastic parts of the vehicle are not cracked or broken.

• Occasionally use a lightweight oil to lubricate moving parts such as wheels.

• Park the vehicle indoors or cover it with a tarp to protect it from wet weather.

• Keep the vehicle away from sources of heat, such as stoves and heaters.
  Plastic parts may melt.

• Clean the vehicle with a soft, dry cloth. To restore shine to plastic parts, use non-wax furniture polish. Do not use car wax. Do not use abrasive cleaners.

• Do not drive the vehicle in loose dirt, sand or fine gravel which could damage the moving parts.

Our products are suitable for  ASTM F963; GB6675; EN71 and EN62115 standards.

WARNING
To reduce the risk of injury, adult supervision is required. Never use in roadways, near motor vehicles, on or near steep inclines or steps, swimming pools or other bodies of water, always wear shoes, and never allow more than 1 rider.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>