MAGICFX FX-BLOWER Stage Blower User Manual

June 5, 2024
MAGICFX

MAGICFX FX-BLOWER Stage Blower User Manual
MAGICFX FX-BLOWER Stage Blower

FOREWORD

Congratulations! You have bought a great new product from MAGIC FX.

This manual contains all information required for the intended use of the equipment. Deviation from the described intended use can result in a hazardous situation and/or property damage.

This manual includes notes and warnings on safe operation of the equipment. These notes and warnings are accompanied by the following icons. Read them attentively!

Warning Icon DANGER Indicates a hazardous situation that, if not avoided, will result in death or serious injury. This signal word is to be limited to the most extreme situations.

Warning Icon WARNING Indicates a hazardous situation that, if not avoided, could result in death or serious injury.

Warning Icon CAUTION Indicates a hazardous situation that, if not avoided, could result in minor or moderate injury.

NOTICE Indicates information considered important, but not hazardrelated (e.g. messages relating to property damage).

LANGUAGE

This document contains the original instructions in English. In case you require other languages please contact MAGIC FX.

REVISION TABLE

Doc nr

| Revision| Date| Description| Author|

Approved

---|---|---|---|---|---
PART02062| 01-00| 26-5-2021| Initial release| NE| LL

MEET THE MAGICFX® FX-BLOWER!

The MAGICFX® FX-BLOWER is a special effect machine that, is designed to create a powerful wind effect. The MAGICFX® FX-BLOWER can for example, be used to extend snow, foam, confetti, smoke, and haze effects. With this powerful electric blower, effects can be boosted up to 15 meters!

The MAGICFX® FX-BLOWER is intended for use in moving air in non-hazardous, nonflammable, non-explosive environments. The MAGICFX® FX-BLOWER is not intended for use in extremely dusty environments. Moving or circulating gas, substances, sprays, fumes, or a mixture thereof is not permitted.

MAIN PARTS

Product Overview

TECHNICAL DATA
Product Product Name MAGICFX® FX-BLOWER
Product Code MFX2402
Product Type AIR FX
Main Dimensions Length 502 mm
Width 457 mm 18.0 in
Height 470 mm ( 500 mm = 45° ) 18.5 in
Weight Weight 17 kg
Environment Minimum Temperature -20 °C
Maximum Temperature 45 °C 113 °F
Humidity (Relative) 20 % to 90 % (non condensing)
Electrical Voltage Input 210 – 240 Vac
Voltage Frequency 50 – 60 Hz
Power Consumption 1560 W
Power Connector Neutrik® powerCON TRUE1 in/out
Usage Control options 3-position speed control
PRODUCT IDENTIFICATION

Product Identification

ACCESSORIES

Code

|

Product

---|---
MFX0313| SCHUKO TO NEUTRIK® POWERCON TRUE1 – CABLE 1.5 m
MFX2403| MAGICFX® FX-BLOWER BRACKET
SPR00119| SAFETY STEEL 60 cm – 25 kg
MFX3104| DOUGHTY QUICK TRIGGER CLAMP (100kg)
MFX3106| DOUGHTY HALF COUPLER CLAMP (100kg)

Accessories

Please contact MAGIC FX for additional possibilities.

NPUT & OUTPUT

With the MAGICFX® FX-BLOWER BRACKET (MFX2403) the product can be hung in different angles underneath a TRUSS® .

The output distance depends on the speed position

Speed control

| Start-up Power Peak| Nominal Power|

Max. output distance

---|---|---|---
Low| 930 W| 800 W| 9 m| 29.5 ft
Medium| 1190 W| 850 W| 12 m| 39.4 ft
High| 1560 W| 930 W| 15 m| 49.3 ft

NOTICE Wind and other weather circumstances will influence the output distance. The given values are estimated values.

NOTICE The estimated power consumption values may deviate due the Starting current.

BLOW SAFELY!

The machine has been designed and constructed in such a manner that it can be used safely. This applies to the use, the circumstances, and the regulations as described in this documentation. Reading this documentation and following the instructions are therefore necessary for everyone who is authorised to work with the machine.

The machine must be used in surroundings that:

  • Have a stable temperature of between -20 and 50 °C.
  • Have a relative humidity degree between 20 % and 90 % (non condensing).
  • Are free of dust, corrosive gases and high concentrations of organic vapours.
  • Are not situated in the vicinity of a source of vibration.
GENERAL SAFETY RULES
  • Only authorized persons may carry out work with the MAGICFX® FX-BLOWER.
  • Do not use the MAGICFX® FX-BLOWER if there are people or animals in the direct output.
  • Do not use the MAGICFX® FX-BLOWER if alterations have been made other than by or on behalf of MAGICFX®.
  • Make sure that children, unauthorized people and animals do not obtain access to the MAGICFX® FX-BLOWER.
  • Make sure there are no free-standing objects or objects that can be damaged by the machine within the output distance.
  • Do not connect more units to a single electrical circuit than the installed fuse is able to handle. (Calculate the summed load with the electrical data)
  • Do not connect the MAGICFX® FX-BLOWER to a dimmer (pack).
  • Do not remove any safeguards, safety caps, and safety symbols.
  • All required safety devices must be in good condition and function properly.
  • Ensure sufficient lighting of the surroundings.
  • Keep the workplace clean.
TRANSPORT
  • Clean the device, make sure there is no confetti or other objects left inside the device.
NDOOR & OUTDOOR USE

The MAGICFX® FX-BLOWER is designed for indoor and outdoor use.

Warning IconWARNING The machine can not be used in rain or other wet conditions with any fluids.

RIGGING

Please follow the European and national guidelines for safe rigging and trussing.

NOISE LEVEL
  • The measured maximum noise level of the product is 76 dB(A) at 1 m distance away.
  • This level of noise is only reached during the short instances that the output is active.
  • Please follow the European and national guidelines regarding hearing protection.
SAFETY SYMBOLS

Symbol

|

Meaning

---|---
Reading Icon| Read the manual carefully before use!

Warning Icon

| To reduce the risk of electric shock, do not remove cover. No user- serviceable parts inside. Refer servicing to qualified service personnel.

Only connect to a socket with an earth leakage circuit breaker.

Warning Icon| Do not expose this appliance to rain or moisture.

PRECAUTIONS FOR OPERATION

Warning IconWARNING Using a damaged or an improper installed machine can lead to death, serious injury or property damage. Always inspect the machine thoroughly before operation.

Warning IconWARNING Unauthorized operation of the machine can lead to death, serious injury or property damage. Never leave the machine unattended when the machine is ready for use.

Warning Icon WARNING Do not use the MAGICFX® FX-BLOWER if alterations have been made other than by or on behalf of MAGICFX®.

Warning Icon WARNING Missing or obscured safety symbols on the machine can lead to death, serious injury or property damage. Make sure all safety symbols are correctly in place and visible.

Warning IconWARNING Make sure there are no objects near the input grill that can block the air to be sucked in.

Warning Icon WARNING Make sure there are no objects near the output that can be damaged or overthrown by the MAGICFX® FX-BLOWER.

Warning IconWARNING Always keep the output zone as shown in the image below clear of all people, animals and objects. Not doing so results in death or serious injury

Using Precaution

LET’S BLOW SOME AIR!

INSTALL THE MACHINE
  1. Place the MAGICFX® FX-BLOWER on a firm surface. Make sure it is placed in a stable manner or built-in well.

  2. Adjust the angle towards the desired direction.

  3. Connect a powerCON TRUE1 power cable to the power input. Connect the other end to a socket with an earth leakage circuit breaker.
    Installations Instructions
    Warning IconCAUTION Do not connect more units to a single electrical circuit that the installed fuse is able to handle. (Calculate the summed load with the electrical data)

  4. Set the position switch in the desired wind speed position. Low, Medium or High.
    Installations Instructions

TIME TO BLOW!
  1. Make sure that the direct output is free from persons, animals, and objects.
  2. When it’s time to blow, switch the power on.
  3. Enjoy the view!
  4. To deactivate, switch off the power
CLEAN UP
  1. Set the speed control button in the OFF position (0)
    Cleaning Up Instructions

  2. Disconnect the cables, place the TRUE1 protection cap.

  3. Remove any remaining confetti from the outside of the machine.

TRUSS BRACKET ACCESSORY

INSTALLATION OF THE FX-BLOWER BRACKET
  1. Please read the user and installation manual of the MAGICFX® FX-BLOWER BRACKET.
    Available at https://www.magicfx.eu/downloads/

MAINTENANCE

To achieve the maximum service life of the MAGICFX® FX-BLOWER you must regularly clean the MAGICFX® FX-BLOWER and test if it is functioning correctly.

Contact MAGIC FX if the MAGICFX® FX-BLOWER is not functioning correctly.

Warning IconDANGER Do not replace parts yourself; always consult MAGIC FX.

TROUBLESHOOTING

Always contact MAGIC FX if any malfunctions or errors occur that cannot be solved with the instructions as described in this manual.

CORRECT DISPOSAL

Dustbin IconThis symbol on the product and / or accompanying documents means that used electrical and electronic products should not be mixed with general household waste. For proper treatment, recovery and recycling, please take this product to designated collection points where it will be accepted free of charge.

Alternatively, in some countries you may be able to return your products to your local retailer upon purchase of an equivalent new product.

Disposing of this product correctly will help save valuable resources and prevent any potential negative eff ects on human health and the environment, which could otherwise arise from inappropriate waste handling.

Please contact your local authority for further details of your nearest designated collection point.

Penalties may be applicable for incorrect disposal of this waste, in accordance with your national legislation.

EC DECLARATION OF CONFORMITY

According to Annex III A Machinery Directive 2006/42/EC

MAGIC FX B.V. declares as manufacturer and composer of the technical construction file that the product with the following specifications:

  • Name machine : FX-BLOWER®
  • Type : MFX2402
  • Voltage : 210-240Vac 50/60Hz
  • Serial number : on product
  • Year   of construction : on product

Is in conformity with the minimal safety regulations as stated in the following directive(s):

  • LVD (2014/35/EU) Low Voltage Directive
  • EMC (2014/30/EC) ElectroMagnetic Compatibility
  • RoHS (2011/65/EU) Restriction of the use of certain Hazardous Substances
  • WEEE (2012/19/EU) Waste Electrical & Electronic Equipment

The following harmonized standards were applied:

  • NEN-EN-ISO 12100:2010 Safety of machinery – General principles for design – Risk assessment and risk reduction.
  • NEN-EN-IEC 60335-2-80:2003 + A1:2004 + A2:2009 Household and similar electrical appliances – Safety – Part 2-80: Particular requirements for fans.
  • NEN-EN-IEC 60335-1:2012/A11:2014 Household and similar electrical appliances – Safety Part 1: General requirements.
  • NEN-EN-IEC 62233:2008 Measurement methods for electromagnetic fields of household appliances and similar apparatus with regard to human exposure.

 Original declaration of conformity
Translation of the original declaration of conformity

  • Name manufacturer : MAGIC FX B.V.
  • Address : Schouwrooij 27, 5281 RE BOXTEL
  • Country : The Netherlands
  • CEO : B. Veroude
  • Date : 4-3-2021
  • Signature : Signature

DISCLAIMER

Warning Icon WARNING Read this manual carefully before installing and/or using this product. Failure to read the manual and to follow the printed instructions may lead to personal injury and/or damage to the product.

© 2021 MAGICFX®
All rights reserved.

Nothing from this publication may be copied, reproduced and/or published by means of printing, photocopying or by any other means, without the prior written approval of MAGIC FX. MAGIC FX reserves the right to modify specifications stated in this manual.

TRADEMARKS

Any brand names mentioned in this manual are registered trademarks of their respective owners.

LIABILITY

MAGIC FX accepts no liability for claims from third parties arising from unauthorized use, use other than that stated in this manual, and use other than in accordance with the General Conditions registered at the Chamber of Commerce.

We further refer to the General Conditions. These are available on request, free of charge.

Although considerable care has been taken to ensure a correct and comprehensive description of all relevant components, the manual may nonetheless contain errors and inaccuracies.

Should you detect any errors or inaccuracies in the manual, we would be grateful if you would inform us. This helps us to further improve our documentation.

FOREWORD

Congratulations! You have bought a great new product from MAGIC FX.

This manual contains all information required for the intended use of the equipment. Deviation from the described intended use can result in a hazardous situation and/or property damage.

This manual includes notes and warnings on safe operation of the equipment. These notes and warnings are accompanied by the following icons. Read them attentively!

DANGER Indicates a hazardous situation that, if not avoided, will result in death or serious injury. This signal word is to be limited to the most extreme situations.

WARNING Indicates a hazardous situation that, if not avoided, could result in death or serious injury.

CAUTION Indicates a hazardous situation that, if not avoided, could result in minor or moderate injury.

NOTICE Indicates information considered important, but not hazardrelated (e.g. messages relating to property damage).

LANGUAGE

This document contains the original instructions in English. In case you require other languages please contact MAGIC FX.

REVISION TABLE

Doc nr| Revision| Date| Description| Author| Approved
---|---|---|---|---|---
PART02063| 01-00| 26-5-2021| Initial release| NE| LL

MEET THE MAGICFX® FX-BLOWER BRACKET!

The MAGICFX® FX-BLOWER BRACKET is an accessory that is designed for the MAGICFX® FX-BLOWER. With the MAGICFX® FX-BLOWER BRACKET it is possible to hang the MAGICFX® FX-BLOWER below a truss in different angles / positions.

The MAGICFX® FX-BLOWER BRACKET is only for use in combination with the MAGICFX® FX-BLOWER. Use in combination with other blowers or machines is not permitted.

MAIN PARTS

Product Overview

TECHNICAL DATA

Product Product Name MAGICFX® FX-BLOWER BRACKET
Product Code MFX2403
Product Type ACCESSORIES

Main

Dimensions

| Length| 245 mm| 9.7 in
Width| 365 mm| 14.4 in
Height| 270 mm| 10.7 in
Weight| Weight| 2.5 kg| 5.5 lb
Work Load Limit| WLL| 75 kg| 165 lb
Environment| Minimum Temperature| -20 °C| -4 °F
Maximum Temperature| 45 °C| 113 °F
Humidity (Relative)| 20 % to 90 % (non condensing)

PRODUCT IDENTIFICATION

Product Identification

ACCESSORIES
Code Product
MFX3104 DOUGHTY QUICK TRIGGER CLAMP (100kg)
MFX3106 DOUGHTY HALF COUPLER CLAMP (100kg)

Accessories

Please contact MAGIC FX for additional possibilities.

USE SAFELY!

The MAGICFX® FX-BLOWER BRACKET has been designed and constructed in such a manner that it can be used safely. This applies to the use, the circumstances and the regulations as described in this documentation. Reading this documentation and following the instructions are therefore necessary for everyone who is authorised to work with this accessory.

The MAGICFX® FX-BLOWER BRACKET must be used in surroundings that:

  • Have a stable temperature of between -20 and 50 °C.
  • Have a relative humidity degree between 20 % and 90 % (non condensing).
  • Are free of corrosive gases, and high concentrations of organic vapours.
  • Are not situated in the vicinity of a source of vibration.
  • Are free of sea or chlorine spray.
GENERAL SAFETY RULES
  • Only authorized persons may carry out work with the MAGICFX® FX-BLOWER BRACKET.
  • Do not use the MAGICFX® FX-BLOWER BRACKET if alterations have been made other than by or on behalf of MAGICFX®.
  • Make sure that children, unauthorized people and animals do not obtain access to the MAGICFX® FX-BLOWER BRACKET.
  • Do not remove any safeguards, safety caps and safety symbols.
  • All required safety devices must be in good condition and function properly.
  • Regularly check if all the fasteners are tightened.
  • Regularly check if there are no corrosive layers on the fasteners. Replace if present.
INDOOR & OUTDOOR USE

The MAGICFX® FX-BLOWER BRACKET is designed for indoor and outdoor use.

WARNING The MAGICFX® FX-BLOWER BRACKET can not be used in rain or other wet conditions with any fluids.

RIGGING

Please follow the European and national guidelines for safe rigging and trussing.

Warning IconWARNING The MAGICFX® FX-BLOWER BRACKET is especially designed for the MAGICFX® FX-BLOWER . De not use the MAGICFX® FX- BLOWER BRACKET with other equipment than the MAGICFX® FX-BLOWER.

Warning IconWARNING MAGICFX® is not responsible for any rigging equipment and accessories provided by third party manufacturers. Verify that the Work Load Limit (WLL) of all additional hardware rigging accessories is respected.

Warning IconWARNING Reduce the risk of falling objects! Verify no unattached items remain on the MAGICFX® FX-BLOWER BRACKET

Warning IconWARNING Work only with qualified personnel for rigging the MAGICFX® FXBLOWER BRACKET.

SAFETY SYMBOLS

Symbol

|

Meaning

---|---

Reading Icon

| Read the manual carefully before use!

PRECAUTIONS FOR OPERATION

Warning IconWARNING Using a damaged or an improper installed MAGICFX® FX-BLOWER BRACKET can lead to death, serious injury or property damage. Always inspect the MAGICFX® FX-BLOWER BRACKET thoroughly before operation.

Warning IconWARNING Do not use the MAGICFX® FX-BLOWER BRACKET if alterations have been made other than by or on behalf of MAGICFX®.

Warning IconWARNING Missing or obscured safety symbols on the machine can lead to death, serious injury or property damage. Make sure all safety symbols are correctly in place and visible.

HOW TO ASSEMBLE THE BRACKET

INSTALLATION OF THE FX-BLOWER BRACKET
  1. Remove the eight plastic caps from the mounting holes on top of the machine.

  2. Place the bracket on top of the MAGICFX® FX-BLOWER and mount the supplied bolts and washers. Apply thread-locker (LOCTITE® 243) on the bolts.
    Assemble The Bracket

  3. Mount the Doughty Quick-trigger Clamp (MFX3104) on top of the bracket with the supplied fasteners.
    Assemble The Bracket

  4. Hang the assembly below a truss and rotate over the vertical axis of the MAGICFX® FX-BLOWER by untighten and tighten de female T-nut underneath the clamp.
    Assemble The Bracket

  5. Rotate over the horizontal axis of the MAGICFX® FX-BLOWER by untighten and tighten the male star-nuts on both sides of the rotation bracket.
    Assemble The Bracket

  6. Always secure the MAGICFX® FX-BLOWER with the build-on safety eye and a certified safety-chain to the truss. (SPR00119)
    Assemble The Bracket

Warning Icon WARNING Make sure that the maximum weight on the safety-chain is calculated.

MAINTENANCE

To achieve the maximum service life of the MAGICFX® FX-BLOWER BRACKET you must regularly clean the MAGICFX® FX-BLOWER BRACKET and test if it is functioning correctly.

Contact MAGIC FX if the MAGICFX® FX-BLOWER BRACKET is not functioning correctly.

Warning Icon DANGER Do not replace parts yourself; always consult MAGIC FX.

TROUBLESHOOTING

Always contact MAGIC FX if any malfunctions or errors occur that cannot be solved with the instructions as described in this manual.

CORRECT DISPOSAL

Dustbin IconThis symbol on the product and / or accompanying documents means that used electrical and electronic products should not be mixed with general household waste. For proper treatment, recovery and recycling, please take this product to designated collection points where it will be accepted free of charge.

Alternatively, in some countries you may be able to return your products to your local retailer upon purchase of an equivalent new product.

Disposing of this product correctly will help save valuable resources and prevent any potential negative effects on human health and the environment, which could otherwise arise from inappropriate waste handling.

Please contact your local authority for further details of your nearest designated collection point.

Penalties may be applicable for incorrect disposal of this waste, in accordance with your national legislation.

EC DECLARATION OF CONFORMITY

According to Annex III A Machinery Directive 2006/42/EC

MAGIC FX B.V. declares as manufacturer and composer of the technical construction file that the product with the following specifications:

  • Name machine : FX-BLOWER BRACKET
  • Type : MFX2403
  • Work Load Limit : 75 kg |165 lb
  • Serial number : on product
  • Year of construction : on product

The following harmonized standards were applied:

  • NEN-EN-ISO 12100:2010 Safety of machinery – General principles for design – Risk assessment and risk reduction.
  • EN-EN 13155:2020 Crane – Safety – Non-fixed load lifting attachments

 Original declaration of conformity
Translation of the original declaration of conformity

  • Name manufacturer : MAGIC FX B.V.
  • Address : Schouwrooij 27, 5281 RE BOXTEL
  • Country : The Netherlands
  • CEO : B. Veroude
  • Date : 23-3-2021
  • Signature: Signature

WWW.MAGICFX.EU

Social Media Icons

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals