ANKER A2536 PowerWave Pad Lite Instructions

June 5, 2024
Anker

ANKER logoANKER A2536 PowerWave Pad Lite

LED Indicators Status
Solid blue for 3 seconds, then off Connected to power
Solid blue Charging mobile phone
Flashing blue Metal or abnormal objects detected
Flashing green Overvoltage protection, indicating you need to switch to

a 5V 2A DC adapter

  •  You cannot charge your device wirelessly in these scenarios:
  • using a case with a magnetic/iron plate; 9 using a case with a pop socket; * using an ultra-thick (> 5 mm) protective phone case.
  • Do not place any foreign objects between your device and the wireless charger’s surface, including metal pads on a car mount, credit cards, door keys, coins, metal, or NFC cards, which will make wireless charging fail or cause overheating.
  • Wireless chargers make charging more convenient than wired chargers but confined by current wireless technology, their charging speed is slower than that of wired chargers.
  • High temperatures will reduce charging speed and restrict power. which is a phenomenon common to all wireless chargers. It is recommended that you charge your device in environments with temperatures below 25°C / 77°F.
  • Both the protective phone case and the position of your device on the wireless charger will affect the charging speed. The farther it is placed from the center of the wireless charger, the slower the charging speed will be.

Important Safety Instructions

Please refer to the electrical and safety information on the bottom before installing or operating the product.

  • Avoid dropping.
  • Do not disassemble.
  • Do not expose to liquids.
  • For the safest and fastest charge, use original or certified cables.
  • This product is suitable for moderate climates only.
  • The maximum ambient temperature during use of this product must not exceed 40°C.
  • Open flame sources, such as candles, must not be placed on this product.
  • Only use a dry cloth or brush to clean this product.

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  1. Reorient or relocate the receiving antenna.
  2. Increase the separation between the equipment and receiver.
  3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  4. Consult the dealer or an experienced radio / TV technician for help.

Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with a minimum distance of 20 cm between the radiator & your body.
Product Name: PowerWave Pad Lite+
Model: A2536
Anker Innovations Limited
Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong
The following importer is the responsible party.
Company Name: Fantasia Trading LLC Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764
Telephone: +1 800 988 7973

Specifications

Input 5V 2A
Wireless Output SW

| Indoor use only.
---|---
****| 1 This symbol indicates that this product shall not be treated as household waste. Instead, it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment.

Customer Service
18-month limited warranty*
Lifetime technical support
@Anker @Anker Japan
@Anker Deutschland
@AnkerOfficial  @AnkerJP
@Anker

support@anker.com
(US) +1 (800) 988 7973 Mon-Fri 9:00am – 5:00pm (PT)
(UK) +44 (0)1604 936200 Mon-Fri 6:00 – 11:00 (GMT)

For FAQs and more information, please
visit: https://www.anker.com/support

A2536 51005002352 vol

Documents / Resources

| ANKER A2536 PowerWave Pad Lite [pdf] Instructions
A2536, 2AOKB-A2536, 2AOKBA2536, A2536 PowerWave Pad Lite, A2536, PowerWave Pad Lite
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals