tp-link KP115 Kasa Smart Wi-Fi Plug Slim Energy Monitoring User Guide

tp-link KP115 Kasa Smart Wi-Fi Plug Slim Energy Monitoring

Introduction

Kasa Smart Wi-Fi Plug Slim is a compact home device that turns your typical electrical wall outlet into a controllable, customizable and multi-functional outlet, enabling you to easily control your lights and household electronic devices via Kasa Smart app on your iOS or Android devices, no matter where you find yourself.

• Control from Anywhere- Manages plugged-in electronics from anywhere with the Kasa Smart app.
• Compact Design- Allows two plugs to be stacked in the same outlet.
• No Hub Required – Connects to your home’s Wi-Fi network. No need for a hub or extra equipment.
• Home Automation – Set multiple schedules, create scenes and groups, and simulate occupancy while away with away mode.

Supported Load Types:

• Heater: ≤1500 W Toaster: ≤850 W
• Humidifier: ≤260 W Tower Fan: ≤50 W
• Iron: ≤1500 W

Appearance

Smart Wi-Fi Plug Slim has a control button to turn on/off devices plugged in, and LED to show you the current status. For detail information, see the explanation below:

• KP115 (US version) is used for demonstration in this guide.

Set Up Your Smart Wi-Fi Plug Slim

Follow the steps below to set up your smart plug via Kasa Smart app.

1. Install Kasa Smart app : Get the Kasa Smart app from Google Play or the Apple App Store, or scan the QR code below to download it.
2. Log in or sign up with TP-Link ID : Open the Kasa Smart app and log in with your TP-Link ID. If you don’t have an account, create one first.
3. Add Device: Tap the button in the Kasa Smart app, select Add a Device >Smart Plugs > Smart Plug Lite / Mini and then follow step-by-step app instructions to complete the setup.

Main Device Controls

After you successfully set up your smart plug, you will see the home page of the Kasa Smart app. Here you can view and manage all devices that you’ve added to Kasa. Tap a smart plug to control and manage it.

1. Home Page
2. Device Status

Configure Your Smart Wi-Fi Plug Slim

On Device Status page, you can set Schedule, preset Away Mode, set Timer, check Usage and change the settings of your smart plug.

1. Set Schedule: Tap to set a schedule for your smart plug to simplify your daily routine by creating automatic On/Off action.
2. Preset Away Mode : Tap to preset the Away Mode and your smart plug will be randomly turned on/off during this time.
3. Set Timer : Tap   to set the timer and your smart plug will automatically be turned on/off after the time ends.
4. Check Usage : Tap  to view and track energy consumption.
5. Device Settings : Tap to view and change the settings of your smart plug.

Create Scenes

A scene is a preset group of smart devices that can be programmed, customized and activated simultaneously at the touch of a button from your smartphone or tablet, allowing you to easily set your mood, activity or fit any special occasion. This page allows you to preset how your smart home devices should act automatically at special occasions.

Discover Kasa

• Use the Kasa Smart app to pair your smart Wi-Fi plug with Amazon Alexa, Google Home Assistant, and enjoy a full hands-free experience. Kasa helps manage the rest of your smart home too, working with Samsung SmartThings to trigger changes when you arrive home or leave for the day.
• Launch the Kasa Smart app and go to Add Device > WORKS WITH KASA > Amazon Alexa / Google Assistant / Samsung SmartThings for detailed instructions.

Authentication

COPYRIGHT & TRADEMARKS

• Specifications are subject to change without notice. is a registered trademark of Technologies Co., Ltd. Other brands and product names are trademarks or registered trademarks of their respective holders.
• No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from TP-Link Technologies Co., Ltd. Copyright © 2020 TP-Link Technologies Co., Ltd. All rights reserved.

FCC compliance information statement

• Product Name : Kasa Smart Wi-Fi Plug Slim, Energy Monitoring
• Model Number: KP115
• Responsible party: TP-Link USA Corporation, d/b/a TP-Link North America, Inc.
• Address : 145 South State College Blvd. Suite 400, Brea, CA 92821
• Website : http://www.tp-link.com/us/
• Tel : +1 626 333 0234
• Fax : +1 909 527 6803
• E-mail: sales.usa@tp-link.com

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/ TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.

FCC RF Radiation Exposure Statement

This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. “To comply with FCC RF exposure compliance requirements, this grant is applicable to only Mobile Configurations. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.” We, TP-Link USA Corporation, has determined that the equipment shown as above has been shown to comply with the applicable technical standards, FCC part 15. There is no unauthorized change is made in the equipment and the equipment is properly maintained and operated.Issue Date: 2020-07-06

Canadian Compliance Statement

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licenceexempt RSS(s).Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

Radiation Exposure Statement:

This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Industry Canada Statement CAN ICES-3 (B)/NMB-3(B)

Safety Information

• The automatic operation feature is Type 1.B action according to UL 60730-1.
• The product is Pollution Degree 2, which is intended to be used in a household environment or similar.
• Keep the device away from water, fire, humidity or hot environments.
• Do not attempt to disassemble, repair, or modify the device.
• Do not use the device where wireless devices are not allowed.
• The socket-outlet shall be installed near the equipment and shall be easily accessible.
• For passthrough devices, plug the power strips into the integrated electrical sockets of the devices, but devices of the same or another type not be stacked in normal use.
• Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk.

Operating Temperature: 0 ºC~ 40 ºC (32°F ~ 104°F )
Storage Temperature: -40 ºC~ 70 ºC (-40°F ~ 158°F )
Operating Humidity: 10%~90%RH, Non-condensing

Explanation of the symbols on the product label

| AC voltage
---|---
| Indoor  use only
| Switch  of micro-gap / micro-disconnection construction
| RECYCLING

This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment.

User has the choice to give his product to a competent recycling organization or to the retailer when he buys a new electrical or electronic equipment.

Conventions

In this guide, the following convention is used:

menus, items, buttons and so on.
Underline| Hyperlinks are in teal and underlined. You can click to redirect to a website.

More Info

• Operating temperature, storage temperature, and other specifications can be found on the product page at https://www.tp-link.com.
• Our Technical Support and troubleshooting information can be found at https://www.tp-link.com/support/.
• A TP-Link Community is provided for you to discuss our products at https://community.tp-link.com.

References

• Link: Simple, secure one-click payments
• WiFi Networking Equipment for Home & Business | TP-Link
• TP-Link Community
• WiFi Networking Equipment for Home & Business | TP-Link
• TP-Link Product Support - Wireless Networking Equipment Support

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>