STAR VOICE SV-II Amplified speaker 2inputs + BT User Manual

STAR VOICE SV-II Amplified speaker 2inputs + BT

Important Safety Instructions

Please read and keep all safety and use instructions. Important Safety Instructions Refer to the owner’s guide for more information about your SV-11

1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produces heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wider blade or third prong is provided for your safety. If the provided plug does not fit in your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles and the point where it exits from the apparatus.
11. Only use attachments/accessories specified by the manufacturer
12. Use only with the cart, stand, tripod, bracket or table specified by the manufacturer or sold combination with the to avoid apparatus. injury When from a cart tip-over. is used, use caution when moving the cart/apparatus
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified personnel. Servicing is required when the apparatus has been damaged in any way such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally or has been dropped.

WARNINGS/CAUTIONS:

• This product symbol enclosure on the that product may means present a there risk is of electrical uninsulated, shock. dangerous voltage within the product enclosure that may present a risk of electrical shock.
• This symbol on the product means there are important operating and maintenance instructions in this guide.
• Contains small parts which may be a choking hazard. Not suitable for children under age 3.
• This product contains magnetic material. Consult your physician on whether this might affect your implantable medical device.

System Setup Connections and Controls

1. LCD Display: Mode switch button, pause button, single cycle button, fast forward and reverse switch button. f)

2. USB: Insert the USB into the card slot to play the stored music.

3. SD: Put it in the SD card slot and play the stored music.

4. MP3 Control: Adjust the volume of MP3.

5. Line Output: Use a XLR cable to connect the line-level output to the Channel 1 or 2 input of a second SV-11 to create a mono, two-loudspeaker setup. Note: Line Out is post mix.

6. Channel Input: Analog input for connecting microphone and instrument (XLR) cables.

7. Select Button: Press the button to select your uitar or instrument.

8. Volume Control: Adjust the volume of your microphone, instrument or audio source.

9. Treble Control: Adjust the high-frequency balance of your microphone or instrument.

10. Bass Control: Adjust the low-frequency balance of your microphone or instrument.

11. Master Control: Adjust the overall output level of the PA speaker system.

12. Power Cord Connector: Connect the power cord to start setting the volume and playing music.

13. Power/Signal/Clip Indicator: Displays the input signal status in color.

    • Green: Power on
    • Yellow: Signal present
    • Red: Signal clipping
      Note: Reduce the corresponding volume control to prevent signal dipping

14. Power Supply: The main power switch.

18650 (up to 3 hours play time)

Package Measure| 343039.5 cm
Gross Weight| 6.8 kgs

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>