Tchibo 674059 Jesper Vanity Unit Instruction Manual
- October 30, 2023
- Tchibo
Table of Contents
Tchibo 674059 Jesper Vanity Unit
Product Information
The product is a yet-to-be identified item that requires assembly. The manufacturer’s name and address are Sachsenweg 55 and the product code is 835152. The manual contains instructions in different languages including German, English, Dutch, and Croatian. The manual also contains warnings and symbols to ensure safety during assembly and use of the product.
Product Usage Instructions
- Before starting the assembly, ensure that all parts are complete and in good condition according to the images provided in the manual.
- Use a soft surface such as a blanket to protect the product from scratches during installation.
- Follow the assembly instructions provided by the manufacturer to avoid safety risks and loss of warranty.
- Keep small parts, packaging bags, and film out of reach of babies and small children to prevent choking hazards and the risk of suffocation.
- Refer to the manual for additional information on installation or use.
- Save the assembly instructions for future reference and pass them on with the product.
- If you need further assistance, you can contact the manufacturer’s customer service department to request a PDF file of the manual.
Article no.: 835152
Tools
Before starting the assembly please check the contents
Dear Customer
the item must be assembled exactly in accordance with the manufacturer‘s
instructions. Otherwise, possible assembly er-rors may pose a safety risk and
result in the loss of the guarantee. Please use a soft surface for
installation (e.g. a blanket) in order to avoid scratches. Keep these assembly
instructions and pass on with the unit. These assembly instructions can also
be obtained from our customer service department as a PDF file.
Warning! Keep small parts, packaging bags and film out of reach of babies and
small children. Risk of suffocating and swallowing!Always follow the assembly
instructions!!
Intended use: This furniture is designed exclusively for use in private
households.
Assembly instructions: Before drilling it is essential to check and take
into account the position of electricity cables and water pipes! In the case
of wall installation it must be ensured that the unit is not mounted on
conducting surfaces and only on solid masonry. The installation material
supplied is suitable for standard, solid masonry. Before wall installation
please check which installation material is suitable for your wall and
exchange it if necessary.
Disposal: The packaging consists of recyclable materials. Please dispose
of the packaging in accordance with your valid local regulations in an
environmentally friendly manner. At the end of its useful life, do not dispose
of the product with the household waste. Ask your communal administration for
possibilities of an environmentally sound disposal.
Maintenance instructions: Please regularly check and tighten all screwed
connections. Loose connections may cause a safety risk. Care instructions:
Always use soft, slightly moistened cloths or shammies to clean your
furniture. Make sure that all parts are wiped dry after use or cleaning. Avoid
abrasive substances or substances containing solvents and do not use
microfibre cloths. Please note that some highly concentrated cosmetics can
cause damage to the material if they are not wiped off immediately. Remove any
surrounding moisture immediately and avoid allowing condensation to build up.
Because such damage is not covered by the guarantee, we would ask you to
follow these instructions carefully to ensure that you enjoy your product for
many years to come.
For care instructions for the individual materials, please visit our homepage
at: www.w-schildmeyer.de
Explanation of symbols: The following symbols are used in these installation
instructions:
- This signal indicates a medium hazard which, if not averted, may result in death or serious injury.
- This signal warns of possible property damage.
- This signal gives you useful additional information on installation or use.
ASSEMBLY INSTRUCTION
Attention! Warning!!
The stability is only guaranteed if the furniture feet are fitted in accordance with the assembly instructions!Please observe the dimensions given in the assembly instructions exactly. The feet must never be fitted more than 10 mm from the outside of the cabinet!
Warning! Risk of breakage!
The Furniture feet must be mounted at a maximum distance of 2 mm from the
outer edge!!
Warning! Danger of tipping!
Be sure to use wall mounting!
The installation material supplied is suitable for standard, solid mason-ry. Before wall installation please check which installation material is suitable for your wall and exchange it if necessary.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>