Ocean Digital WR-80 Digital WiFi+FM Internet Radio User Manual

: June 5, 2024
: Ocean Digital

Table of Contents

Package contents
Before you start
Location of Controls
Remote Control
Enter the encryption code of the Wi-Fi router
Connect the radio with your Wi-Fi Router
Ethernet connection
Start using internet radio
Add your favorite URL
Music Streaming from mobile devices
Technical Specification
FCC Notice
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Digital WR-80 Digital WiFi+FM Internet Radio
User Manual

Ocean Digital WR 80 Digital WiFi FM Internet Radio

Please read this user manual carefully before using the receiver.

CAUTION

TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT USE THIS PLUG WITH AN EXTENSION CORD, RECEPTACLE, OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

****The lightning flash with the arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of insulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

|

WARNING
To reduce the risk of electric shock do not remove the cover( or back). No user-serviceable parts are inside. Refer servicing to qualified personnel.

|

The exclamation point within an equilateral triangle is intended to alert the user to the
presence of important operating and maintenance (servicing) instructions in the
the literature accompanying the appliance.

---|---|---

Welcome

Thank you for purchasing Internet Radio. Your Internet Radios are designed as a digital music radio to add to your existing Audio system and to provide you with hours of music enjoyment with simple, convenient access to thousands of Internet radio stations worldwide and furthermore music streaming options.

Package contents

Please make sure that the following contents are included in the package:

Internet Radio
Power supply
Remote control
Radio User Manual

Ocean Digital WR 80 Digital WiFi FM Internet Radio - Package
contents

Before you start

Before you can use your internet radio and/or the music streaming function, you need the following:

A broadband internet connection.
A wireless access point is connected to your broadband internet. Via a router is recommended.
If your wireless network is configured to use WEP (Wired Equivalent Privacy) or WPA ( Wi-Fi Protected Access) data encryption, it is important that you know your WEP or WPA code to connect to your network.
PC
• Windows Media Player (WMP) 11 can be set up to enable streaming music files from the PC to the radio.
• The PC can also be used to customize the radio’s favorite

Location of Controls

Top

Front

Back

1. Standby
– Press to turn on the radio /standby
2-5. Dedicated favorite keys no. 1-4 Long press to preset; short press to recall
6. FAV
– Long press to add to the favorite list; Short press to recall a list of favorite stations
7. Menu – Press to the main menu
8. Left
– Back to the previous menu
– Left cursor
9. Alarm / Sleep Timer / Snooze
– Press briefly to set the Sleep
Timer
– Long pressing to set the Alarm
– When the alarm sounds, press to delay the alarm for 9 minutes
10. Local
– Quick access to the local station in your country| 11. Right
– Right cursor
– Under the Favorite list, press to enter the edit menu
12. Speaker
13. Volume control
14. LCD display
– On Standby mode, rotate the Tune/Select knob to adjust the brightness level
15. Tune / Select / OK control
– Rotate to tune and push to select / OK
16. Ethernet port
– plug in the LAN cable and the radio will switch to Ethernet from Wi-Fi in seconds
17. 3.5 mm Line out jack
18. Telescopic antenna for FM
19. 3.5 mm Earphone jack
20. DC jack 5V IN
---|---

Remote Control

Ocean Digital WR 80 Digital WiFi FM Internet Radio - Remote
Control

Power: Standby on/off
Mute: Speaker on/off
0-9: Input numbers for encryption code, recall favorite stations, and enter index number to select an item from the list Toggle the same numeric key gives you a choice to input letters
Return to Main Menu
Mode: Switch between Internet radio and Media Centre
Alarm: Alarm Setting
: Preset the current playing station to Favorite
: Recall the favorite station
Local: Access radio stations in your local country
Last: Switch between the current listening station and the last listened to station
↑ : Cursor up
↓ : Cursor down
← : Cursor left/Back
→: Cursor right
Info: Access the network and system information
Enter: Confirm selection
▶: Next (next item in the list: next station, next track)
◀: Previous (Previous item in the list: previous station, previous track)
Volume +: Increase volume
Volume -: Decrease volume
Sleep: Sleep Timer setting

Enter the encryption code of the Wi-Fi router

Using remote control
When you want to enter the letters, numbers, or symbols for the encryption code, using remote control would be easy to complete the job.
Here is the definition of each key press the same button to cycle through different letters/symbols available
After each entry, press the right key to input the next. When it is done, press Enter to confirm.

Key 1: 1 and different kind of symbols !@#$%^&*()_+[]{};:’”|,./<>?
Key 2: 2ABCabc
Key 3: 3DEFdef
Key 4: 4GHIghi
Key 5: 5JKLjkl
Key 6: 6MNOmno
Key 7: 7PQRSpqrs
Key 8: 8TUVtuv
Key 9: 9WXYZwxyz
Key 0: 0

Using buttons on the radio
Use the Dial control to scroll through the letters or symbols, and press the right key to input the next entry. Press the Dial knob when it is done.

Precautions

The radio should not be used in a high temperature or high humidity environment over prolonged periods of time as this may damage the unit.
Keep the radio away from liquids as they may get damaged. Please switch off the radio immediately if water or liquids is spilled into the radio. Consult with the shop you bought this radio for any questions.
Avoid using or storing the unit in a dusty or sandy environment.
Do not open and repair the radio by yourself.
Use only the AC adaptor supplied with the radio.
Connecting a power supply with a different rating will cause permanent damage to the radio and may be hazardous.
Clean only with a dry cloth.

WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK HAZARDS, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

CAUTION
THE RISK OF ELECTRIC SHOCK DOES NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE RADIO BACK. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

THE LIGHTNING FLASH AND ARROWHEAD WITHIN THE TRIANGLE IS A WARNING SIGN ALERTING YOU OF “DANGEROUS VOLTAGE” INSIDE THE RADIO.
THE EXCLAMATION POINT WITHIN THE TRIANGLE IS A WARNING SIGN ALERTING YOU OF IMPORTANT INSTRUCTIONS ACCOMPANYING THIS RADIO.

Connect the radio with your Wi-Fi Router

Insert the adaptor plug into the DC socket located at the rear side of the radio.
Plug the adaptor into a wall socket outlet.
Caution: Use only the adaptor supplied with the radio. Connecting a power supply with a different rating will cause permanent damage to the radio and may be hazardous.
The radio will power on and display as follow. Choose to start configuring the network.
Select <Add/Remove AP> and :
It will start scanning the available Wi-Fi routers nearby. Choose to connect your AP and enter the encryption code. Press ‘Enter’ to confirm.
Remark: The encryption codes are case sensitive to upper and lower case.
When the Wi-Fi connection is done, the display shows:
If you try to select Skytune when The Wi-Fi network is not connected, it will show the message below:Skyline is not connected, retry later

When the “No internet warning icon” appears, it means the WiFi connection is there but there is a problem with the internet connection. Please check your internet connection if this icon appears.

Ethernet connection

If you want to connect to the internet via Ethernet, simply plug in the Ethernet cable to the Ethernet socket at the rear side of the radio, you will see the Ethernet icon starts blinking, it’s now connecting to the network. Once the icon goes steady, it means the network is connected.

Start using internet radio

Press

to return to the main menu or the key on the remote controller. You will see the item list below:

My Favorite
Internet Radio
Media Centre
Alarm
Sleep Timer
Configuration

\- To show the list of favorite stations which have been assigned to the presets. There are up to 99 presets available. \- Start exploring the worldwide radio stations and music here \- Music streams from the UPnP servers/ devices under the same Wi-Fi network \- Setting of Alarms \- You can set the timer to turn the radio standby after a certain time elapsed \- More settings are available for you to configure the radio as you desire

My Favorite
This is to show the list of your Favorite stations which have been assigned to the presets.

Stored a station to the Favourite list
There are 4 dedicated preset buttons on the radio that allow accessing the top 4 favorite stations.
The radio can store up to 99 preset stations for each Internet radio and FM radio.
While you are playing a radio station, press the button on the remote control or long-press the key on the unit, and you will see the icon appears as below. It means the station is added to the Favorite list.

The newly added station will always show in the last item on the Favorite list.
You can store up to 99 presets

Recall a station
Press the button on the remote controller or press the button briefly on the unit to recall the Favorite list. You can enter the Index number to quickly scroll to the radio station you want to listen. e.g., On the remote controller, press 2 8 and Enter, it will scroll to station no. 28.

Edit your favorite list
On the Favorite list, choose the radio station you want to edit then press the right → key on the remote controller. It will enter the Edit menu with the following options:

Move down – To move down the ranking of a station
Move up – To move up the ranking of a station
Delete – To delete a particular station

Internet Radio
On the main menu, choose and you will find the options below:

Skytune
Search
History

Skytune
Select Skytune to start enjoying thousands of radio stations over the world. You can filter your search by Region, Music genre, and talks. The <Local Radio> lets you access quickly the stations available in your local area.

Local Radio
Globe All
Globe By Genre
Globe By Region

****You can change the Local Radio area under Configuration > Local radio setup.

Search
Instead of browsing the radio station list, you can access the desired station by performing a search and inputting the name of the station.

History
The radio will memorize the stations you have listened to on the radio. It can memorize up to 99 stations.
If you have listened to more than 99 stations, it will supersede the first station that you have listened to.

FM Radio
Before listening to FM, we suggest doing the configuration first before switching to the FM radio mode. Extend the FM antenna as far as it can go to ensure the best reception.
Go to Configuration > FM Setup, you will find the following options:

FM Area
FM Preset Scan
FM Radio Preset

– select the suitable range of FM frequency that corresponds to your local area. – It will auto scan all the available stations to form a preset list, then you can simply choose from the presets to add to the Favourite list. – After the preset scan is done, you can view the preset list here.

Switch the radio mode to FM, press the right or left button on the radio and it will scan to the next/ previous preset available provided that the FM Preset Scan has been done. You can then add to the Favourite list if you want by long pressing the FAV button on the radio.

In case you cannot find your favorite stations from the preset, long press the Right or left button to start seeking the next available station or rotate the tuning knob to fine-tune the frequency.

Note: In case of poor reception, please try to place your radio close to the window or more open area.

Media Centre
UPnP (Universal Plug and Play)
You can stream music from the Networked device which supports the UPnP function to the radio to play.
For instance, most of the latest computer laptop supports UPnP, and you can stream music from the Windows Media Player application on the computer and listen to your radio.

Please make sure your computer laptop is on the same Wi-Fi network as the Radio before you start using this function.

If your PC is running Microsoft Windows XP, then you can use Windows Media Player 11(WMP11) to act as your UPnP( Universal Plug and Play) media server. (For Windows 7 or above, please download the corresponding version of Windows Media Player). The latest Windows Media Player may be downloaded from Microsoft’s website and installed by following the instructions detailed in its installation wizard.
Once installed, Windows Media Player will create a library from all the media files available to it on your PC.

Windows XP / Windows Media 11
To add new media files to the library, select’ File > Add to Library…> Advanced Options’, Click ‘Add’ and choose the files you wish to add and click’ OK’.
Now you need to connect your Internet radio to Windows Media Player 11 and configure it to allow the radio to access your media library. In order to do this, you will need to do the following:
a. On the radio, go to the main menu and select .
b. It will scan for all available UPnP servers. Note, that this may take a few seconds for the radio to complete its scan and before the scan has been completed, the radio will display ‘[Empty]’. The radio will continue to display ‘[Empty]’ if no UPnP servers and found.
c. After a successful scan. Select your UPnP server, by rotating the dial if there is more than one UPnP server, and then press SELECT.
Your PC will now prompt you that a device has attempted to connect to your UPnP server. In order to allow the radio to have access to the media files, you will need to click the ‘Library’ tab from Windows Media Player 11 and select the item to open the ‘Media Sharing’ window.
Selecting ‘Media Sharing…’ for Windows Media Player11:

Ocean Digital WR 220 Portable Internet Radio - Windows
Media

From the ‘Media Sharing’ windows, the radio will be listed as an unknown device. Click on the unknown device listed, then click the ‘Allow’ button, and then click ‘OK’.
Allowing the Radio to Connect:

Ocean Digital WR 220 Portable Internet Radio - Windows Media
2

Windows 7 / Windows Media Player 12
If you are using WMP 12, simply go to and choose to retrieve the music files you would like to add to the library.
Windows 7 or above requires the PC to be set as a Home network and also with the Homegroup enabled to allow devices to access/ play the media files on your Windows Media Player. Please find the steps below:

I) Go to , select Ocean Digital WR 220
Portable Internet Radio - Windows Media 3
ii) Choose
Ocean Digital WR 220 Portable Internet Radio - Windows Media
4 iii) Set the network location
iv) Choose Home network
v) Create a home group, then choose the kind of media file to be accessed, such as music..etc.
vi) Launch the Windows Media Player, select and choose <Automatically allow devices to play my media> from the drop-down list.
vii) You can now enjoy the music streaming from the windows media player.
Ocean Digital WR 220 Portable Internet Radio - Windows Media
8 Music streaming via UPnP

Once the UPnP server is configured to share media files with your radio, you can start music streaming.
On the main menu, select and choose
It may take a few seconds for the radio to complete the scan for available UPnP servers. If no UPnP servers are found, it will show .
After a successful scan is done, select your UPnP server.
The radio will show the media categories available from the UPnP server, e.g. ‘Music’, ‘Playlists’ etc.
Choose the media files that you wish to play.

You can set the mode of playback under .

My Playlist
You can make your own playlist for the UPnP music files. Choose the song you want to add to the playlist, long pressing the Dial until the sign appears. The song will be added to “My playlist”. You can add up to 99 songs to “My Playlist”.

The UPnP playlist will be erased when the radio is powered off.

Clear My Playlist
Remove all songs in “My Playlist” to allow a new playlist to be prepared.

Alarm Setting

Choose from the main menu or press the button on the remote controller.
Select either Alarm 1 or Alarm 2, and choose to activate the Alarm.
Follow the alarm wizard instructions to set the alarm.|
The wizard will guide you through the settings below:
Time – Set the time for the alarm
Sound – You can choose or for the alarm sound.
Wake to Radio – only the preset stations can be used for the radio alarm (stations from the Favorite list).
Please preset your favorite station before setting the alarm.
Wake to Melody- The Melody is defaulted by the system.
Repeat – You can schedule the alarm as you desire – every day, Once, or multiple days.
Alarm Volume – Adjust the volume of the alarm as you like by rotating the dial.
After the above settings are completed, press the left! button to exit and make sure the Alarm is turned on. You will see the Alarm icon appear on the display if it is activated.
Press the Tune/Select Knob to stop the Alarm

Snooze
The alarm sounds every 9 minutes when the snooze button is pressed.
Long pressing the “Snooze” button for 2 seconds to cancel the Snooze function.

Sleep Timer Setting
You can set the timer to let the radio go standby after a certain time elapsed in the range of 15 minutes to 180 minutes.
You can press the button on the remote controller to set the timer.
You will see the icon appear on the display if the timer is set.

Configuration Network
There are two options under this setting: Wi-Fi Network and Wi-Fi Channels

Wi-Fi Network

Add / Remove AP
Add AP – It will scan out a list of routers available nearby Remove AP – If you have already added a router and want to remove it, choose this option.

AP: [ ]
If you have added more than one router on the radio and want to switch to another one, select this option to change.

Signal
This is to show the strength of the Wi-Fi signal of the Wi-Fi router as received by radio. Usually, signal levels lower than -70dBm are at the weaker level and if it affects the reception of your radio, you may need to optimize the router location or check any problem with the router itself.

IP
The IP is set by default. Select to change IP according to your network condition.

DNS
The DNS is set by default. Select to change DNS according to your network condition.

Wi-Fi Channels
Not all the Wi-Fi channels are available in every country. There may be variations between different countries. Therefore it is necessary to choose the Wi-Fi channels to ensure the Wi-Fi performs satisfactorily.

We have already set the channels according to the requirement in different countries. Choose the country you are staying from the list to get the correct channel.
The <Europe/United Kingdom> is set by default, press on the Remote controller or push the to edit the country selection.

Date and Time
The radio will set your local time automatically after wifi connection. You can choose to manually set the time if you want. Press the <Tune/Select> rotary knob to enter into the menu, then choose a manual set time zone.

Language
English, French, Spanish, Italian, German, and Simplified Chinese are available.

Local Radio
The radio will detect the radio stations in your local area automatically.
When you press the button on the radio, you can access the local radio stations right away, or select under the Skytune menu.

You can also set the Local with another country if you want. Go to

, choose and select to set other region.

Playback Setup
This is to set the mode of playback under UPnP streaming: Repeat All, Repeat Once, or Shuffle.

DLNA Setup
Our radio supports streaming from DLNA devices and you can rename your radio for easy recognition by the DLNA servers.

Resume when Power on
This function is ON by default. The radio will resume to the last state of mode when the radio is powered on next time, e.g. if it was playing radio station before power off, it will resume playing the last listened station when it is power on the next time.

Dimmer
You can set the display backlight level as you prefer.
There are two settings available: Mode and Level

Mode: Normal or Power Saving
Normal – the display will stay with the same level of the brightness all the time without dimming down.
Power Saving – the display will dim down after 15 seconds if no operation is made on the radio.

Level: Bright and Dim
Bright – the display will stay at the selected level when there is an operation on the radio or if the mode is selected in as described above. Dim – the display will dim to the selected level when mode is selected.

Dimmer on Standby
When the radio is on Standby, rotate the dial to adjust your prefer backlight level which you feel comfortable with, especially during nighttime.

EQ
There are different sound effects available. The Flat is set by default.

Buffer Time
Sometimes you may experience uneven playback of the internet radio.
This can happen if the internet connection is slow or network congestion occurs. To help improve the situation, you can choose a longer buffer time to get a few seconds of radio stream before beginning to play. The default value is 2 seconds. You can choose 5 seconds if you prefer to have a longer buffering time.

Information
View the Network and System Information of your radio.
To access quickly to this information, press the button on the remote controller.

When you use your PC to manage the My favorite stations, you have to use the IP address and you can view this info from here. Then type in the IP address (Configuration>Info>Network>IP) to your PC’s browser input window

Software Update
There may be software releases to upgrade features of the radio from time to time.
Check the update regularly to keep your radio up to date with the latest software.

Reset to Default
You can do the reset to clear all the settings and return to default settings.
** Please note all the Station presets, Settings and configurations will be lost after you have performed the Reset.

Add your favorite URL

You can add your favorite radio station if you know the published URL of the radio.
We provide an embedded server for your radio and you can manage your favorite stations anytime to add or edit the list. Follow the steps below to access the embedded server:

Connect your PC to the same Wi-Fi network as your radio.
Locate the IP address in either way as follow:
Press the button on the remote controller, choose , and scroll to to view the IP address
On the main menu, go to Configuration > Information > Network > IP
Open the web browser (we support Internet Explorer and Chrome) on your PC and type the IP address of the radio (e.g. 192.168.1.11). The screen will pop up as below:
You can input the name and URL of a new radio station under the Add channel section, then click Submit. The new station will sync to the Favorite list of your radio immediately.

You can add up to 99 radio stations.

Music Streaming from mobile devices

Our radio supports playing music streams from a mobile device that uses UPnP or iOS streaming.

Note: Ensure your mobile devices are on the same Wi-Fi network as the radio.
The radio will be discovered as the Speaker source with the name on your mobile devices. Choose the to be the speaker to play music, our radio will start playing the selected music from your mobile device. When the radio displays streams from the remote devices, the display will be shown as below:

If you are using iOS devices and you want to switch back to listen to the internet radio, remember to disable the as the speaker and resume the iOS device as the source of the speaker.

If the Internet Radio keeps re-buffering radio stations:
The Internet Radio is streaming the data from the radio station via your broadband connection, if there is a high error rate on your broadband connection, or the connection is intermittent, then it will cause the Internet Radio to pause until the connection is re-established and it has received enough data to start playing again. If your Internet Radio keeps stopping, please check the DSL modem to ensure that the Broadband line is not suffering a high error rate or disconnections. If you are experiencing these problems, you will need to contact your broadband supplier.
What is Buffering?
When playing a stream, the Internet Radio/Media player, downloads a small amount of the stream before it starts playing. This is used to fill in any gaps in the stream that may occur if the internet or the wireless network is busy.
The Internet Radio streams music data from the PC while you are listening. If a stream gets blocked or experiences Internet congestion while transferring it may stop/interfere with the quality of play. If this happens, check your internet connection speed- it must be faster than the speed of the streams.

Technical Specification

Model: WR-80
Power input: 5V 1A
Power voltage: 100-240V~50/60Hz
Wireless Network: IEEE802.11b/g/n
Ethernet connection Rj45
Security Protocol: WEP/WPA/WPA2
Audio output power: 2.5W (RMS)
Audio sockets: 3.5mm earphone jack, 3.5mm Line-out jack
Unit Dimension: 174 x 92 x 100 mm (L x H x D)
Remark: Specification may vary without notice

WEEE and Recycling

The European laws do not allow anymore the disposal of old or defective electric or electronic devices with household waste. Return your product to a municipal collection point for recycling to dispose of it. This system is financed by the industry and ensures environmentally responsible disposal and the recycling of valuable raw materials.

Ocean Digital Technology Ltd.
Flat B, 12/F., Yeung Yiu Chung (No.8) Ind. Bldg.,
20 Wang Hoi Road, Kowloon Bay,
Hong Kong
Email: support@oceandigital.com.hk

FCC Notice

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.