SBOSENT-287 Bluetooth Portable Speaker User Manual

June 5, 2024
SBOSENT

287 Bluetooth Portable Speaker
User Manual

PRODUCT SPECIFICATIONS:

Wireless: V5.1
Support: L2CAP/A2DP/AVCIP, can receive an AUDIO signal and control the AUDIO device.
Support HSPIHFP(Handsfree profile), with HANDS-FREE functions.

  • Working distance: I OM *SW –90db
  • Battery: 3. N about I 800mAh
  • Normal volume playing time: about 6h
  • Speaker driver: O52mrns2
  • Power 40/5W ‘2
  • Frequency response:120Hz-20KHz
  • Unit size: 80’80’195mm
  • Unit weight: about 503.89 (not including accessories)
  • Charging:5V/1000mA
  • Charging time: about 3h

PRODUCT FEATURE

  1. International advanced wireless chip and circuit design techniques, support all wireless devices.
  2. With the FM function, can search radio station broadcast automatically.
  3. With a Hi-Fi speaker, to make sure the clear and bright sound.
  4. Support Micro SD card and USB card, ploy MP3 format audio.
  5. The wireless working distance is 10 meters.
  6. With AUX line in, can directly connect the outside devices. for example, tablets PC/TV/cell phones.
  7. It will close automatically after 30 mins if disconnected Wireless
  8. A variety of flashing LED lights with different colors, and color lights flash follow the melody.
  9. Support TWS.

KEY AND SLOT FUNCTION

  1. DC 5V slot: Use the standard Micro US8 V8 charging cable for power charging.

  2. TF slot: It can decode and play MP3 format audio when putting the TF card into the slot.

  3. USB slot: It can decode and play MP3 format audio when put the USB card into the slot.

  4. AUX line in the slot: Use the Mini 3.5 head input through outside devices

  5. Power switch: Press long for power on /power off.
    When play music, (USB card/TF card/ Wireless/line in), short press for “play/pause”.
    In FM mode, press short to search station automatically, and press again to stop searching.
    Under wireless mode with mobile paired, when a call is coming, press short to answer a call hands-free, press again to hand up, and press twice to ring up a call.

  6. When playing music, Press short for the lost song. long press to turn down the volume.

  7. When play music, press short for the next song, and long press to turn up the volume.

  8. Short press to switch model(USB card/TF card/Wireless/line in/FM). Press twice for the option of the LED flashing light. Press triple to close the LED light

Keep the two speakers under wireless mode without pairing, press the “M” key for 3 seconds on either of the speakers until hearing a hint, and mean­time the button light stop flashing, now it is MtS mode, then can poke the mobile.
NOTE: In the FM mode. pull out the antenna to increase the rodeo signal USB/TF cord pls use the FAT32 format.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (I) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals