ANKER D2400121 Nebula Astro Mini Portable Projector User Manual

ANKER D2400121 Nebula Astro Mini Portable Projector

Charging Nebula Astro

• Charge the projector by using the provided USB-C cable and adaptor.

Preparing the Remote Control

• Slide down to open the battery compartment.
• Insert new batteries, matching the polarity (+ / -) as indicated.

Powering On Astro

Adjusting the Focus

• Press and hold the power button for 2 seconds to power on / off.
• When the projector is in standby mode, press the power button to turn on / off.
• Rotate the knob to adjust the focus.

Controlling Astro

Downloading the Nebula Connect App

• Download the Nebula Connect app to control the projector using a smartphone.

Wireless Screen Mirroring

• Wirelessly cast movies, games, and music from your phone to Nebula Astro.
• Make sure Nebula Astro and your phone are connected to the same wireless network.

Bluetooth Speaker Mode

• Press to switch to Bluetooth speaker mode. Enable Bluetooth on your smartphone and select [Nebula-XXXXXX] as the device to be connected.

Bluetooth Speaker Mode

• The HDMI and USB port cannot be used for video or audio steaming stmultaneously.

Important Safety Instructions

• The adapter should be installed near the equipment and must be easily accessible.
• Do not use the device in an environment where the temperature is too high or too low. Never expose the device to strong sunshine or wet environments.
• The ideal temperature range for this product and its accessories is 41°F-95°F / 5°C-35°C.
• When charging, place the device in an environment with a temperature that ranges between 41°F – 77°F / 5°C- 25°C as well as good ventilation.
• Only use the charger provided by the manufacturer. Using unauthorized chargers may cause danger and violate the projector’s guarantee.
• This charger is for indoor use only.
• The charger type is DST451-150300W-K with output voltage / current of DC 15V / 3A. The plug of the adapter is considered as the disconnect device. Once unplugged, the charger is considered as disconnected from the power source.
  Notice This product complies with the radio interference requirements of the European Community.

Declaration of Conformity
Hereby, Anker Innovations Limited. declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. For the Declaration of Conformity, visit the website: www.SeeNebula.com.
RF exposure information: The Maximum Permissible Exposure (MPE) level has been calculated based on a distance of d=20 cm between the device and the human body. To maintain compliance with RF exposure requirements, use products that maintain a 20cm distance between the device and human body.
CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS
Wi-Fi Operating Frequency Range:2412~2472MHz(2.4G); 5150~5250MHz, 5725~5850MHz (5G)
Wi-Fi Max Output Power:18.97dBm(ERIP for 2.4G);13.14dBm (ERIP for 5G)
Bluetooth Operating Frequency Range ：2402~2480MHz; Bluetooth Max Output Power:6.85dBm(EIRP)
5150~5250 MHz can be used indoor only.
The following importer is the responsible party (contact for EU matters only)
Importer: Anker Technology (UK) Ltd
Importer Address: Suite B, Fairgate House, 205 Kings Road, Tyseley, Birmingham, B11 2AA, United Kingdom Your product is designed and manufactured with high quality materials and components, which can be recycled and reused.
This symbol means the product must not be discarded as household waste, and should be delivered to an appropriate collection facility for recycling. Proper disposal and recycling helps protect natural resources, human health and the environment. For more information on disposal and recycling of this product, contact your local municipality, disposal service, or the shop where you bought this product.

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference tht may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

References

• Projector - Smart Video Projectors - Nebula US
• Nebula Manual Page

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>