hama 00200017 3-Way Charging Station Instruction Manual

hama 00200017 3-Way Charging Station

INTRODUCTION

Thank you for choosing a Hama product. Take your time and read the following instructions and information completely. Please keep these instructions in a safe place for future reference.

• USB-C: max. 60W
  

• USB-A1 + A2: total max. 20 W
  

• USB-C + A1 + A2: max. 65 W

  • USB-C: 45 W
  • USB-A1 + A2: 20 W

Explanation of Warning Symbols and Notes

Risk of electric shock

This symbol indicates product parts energized with a dangerous voltage of sufficient magnitude to constitute a risk of electric shock.

Warning

This symbol is used to indicate safety instructions or to draw your attention to specific hazards and risks.

Note This symbol is used to indicate additional information or important notes.

Package Contents

•  1x charging station
•  1x power cord
•  1x holder
•  These operating instructions

Safety Notes

•  Protect the product from dirt, moisture and overheating and use it in dry rooms only.
•  Do not drop the product and do not expose it to any major shocks.
•  Do not operate the product outside the power limits given in the specifications.
•  Do not modify the device in any way. Doing so voids the warranty.
•  Do not continue to operate the device if it becomes visibly damaged.
•  Use the product for its intended purpose only.
•  Keep this product, as all electrical products, out of the reach of children!
•  Do not use the product in the immediate vicinity of heaters or other heat sources or in direct sunlight.
•  Lay all cables so that they do not pose a tripping hazard.
•  Do not bend or crush the cable.
•  Always pull directly on the plug when disconnecting the cable, never on the cable itself.
•  Dispose of packaging material immediately according to locally applicable regulations.

Risk of electric shock

• Do not open the device or continue to operate it if it becomes damaged.
• Do not use the product if the AC adapter, adapter cable or power cable is damaged.
• Do not attempt to service or repair the product yourself. Leave any and all service work to qualified experts.

Operation Note

•  Mains voltage 100
•  240 V The charger is suitable for a mains voltage of 100-240 V and can be used around the world. Please note that a country-specific adapter may be necessary.

Warning

•  Connecting terminal devices
•  Before connecting a terminal device, check whether the power output of the charger can supply sufficient power for the device.
•  Ensure that the total power of all connected terminal devices does not exceed 65W
•  Please refer to the instructions in the operating manual of your terminal device.

Note

Power Delivery

•  Plug & GO: no additional software required, simply plug in and start: Thanks to Power Delivery/Thunderbolt™ 3/ Quick Charge, the voltage and power are adjusted automatically.
•  Be aware that, for efficient and optimised charging, your terminal device must support the PD (Power Delivery)/TBT3 (Thunderbolt™ 3)/QC (Quick Charge) function.
•  If you have a large number of PD/TBT3/ QC-enabled terminal devices with different firmware updates, it may be that the function is not fully supported.

Warning

•  Only connect the product to a socket that has been approved for the device. The socket must be installed close to the product and easily accessible.
•  Disconnect the product from the network using the power button – if this is not available, unplug the power cord from the socket.
•  When using a multi-socket power strip, make sure that the sum power draw of all the connected devices does not exceed its maximum throughput rating.
•  If you will not be using the product for a long period of time, disconnect it from mains power. Unless the operating instructions for the devices you want to charge explicitly inform you otherwise, proceed as follows:
•  Connect your terminal device to a USB charging socket using a suitable USB cable.
•  Connect the charger to a properly installed and easily accessible power socket.
• Charging progress is displayed on your terminal device.
•  Disconnect the terminal device from the charger if you want to interrupt charging or if the terminal device is fully charged.
•  Then disconnect the charger from the mains. When charging batteries built into a device, pay attention to the maximum charging time for the batteries.

Care and Maintenance

Only use dry, soft cloths for cleaning. Note Disconnect the device from the power supply before cleaning or if it will not be used for a long period of time.

Technical specifications

Speci fi cations in accordance with Regulation (EU) 2019/1782

Manufacturer’s name or trade mark, commercial registration number and address|

Hama, HRA12159,

Dresdner Str. 9,

86653 Monheim

Model identifier| 00200017
Input voltage| 100-240 V
Input AC frequency| 50/60 Hz

Output voltage / Output current / Output power

| USB- C:

5.0V DC 3.0A 15.0W /

9.0V DC 3.0A 27.0W /

12.0V DC 3.0A 36.0W /

15.0V DC 3.0A 45.0W /

20.0V DC 3.0A 60.0W

PPS:

3.3V-11.0V DC 3.0A

9.9-33.0W

USB A1 + A2:

each port

5.0V DC 2.4A 12.0W

total 20.0W

USB-C + A1 + A2:

USB-C 45.0W

USB A1 + A2 20.0W

Total USB output:

max. 65.0W

Average active efficiency|

86.0 %

Efficiency at low load (10 %)|

77.3 %

No-load power consumption|

0.30 W

Warranty Disclaimer
Hama GmbH & Co KG assumes no liability and provides no warrantyfor damage resulting from improper installation/ mounting, improper use of the product or fromfailure to observe the operating instructions and/or safety notes.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>