ANKER D2341 Nebula Cosmos Laser Instruction Manual

ANKER D2341 Nebula Cosmos Laser

Installing 4K Streaming Dongle

Push and slide up to open the back cover, install the included 4k Streaming Dongle by connecting to the correct Micro-USB connectors, then close the back cover.

connecting to power

Connect the power cord to Nebula Cosmos Laser/ Nebula Comsos Laser 4K and then to the power supply.

Preparing Remote Control

1. Slide down to open the battery compartment.
2. Insert 2 new AAA batteries, matching the polarity (+/-) as indicated.

Powering On/Off

• Press the power button to power on.
• Press and hold the power button for 3 seconds to power off.

Controlling

Main Unit

Remote Control

After Bluetooth connected, control the Dongle by using the remote control.

Nebula Connect APP

Wireless Screen Mirroring

Wirelessly cast movies, games, and music from your phone to Nebula Cosmos Laser/ Nebula Cosmos Laser 4K. Make sure Nebula Cosmos Laser /Nebula Cosmos Laser 4K and your phone are connected to the same wireless network.

Bluetooth Speaker Mode

1. Select “Bluetooth Speaker Mode” to enter Bluetooth speaker mode. You can also enter Bluetooth speaker mode in the Nebula Connect app.
2. Enable Bluetooth on your smartphone and select [Nebula-XxXxXX] as the device to be connected.

Playing Video from HDMI/USB Devices

The HDMI port and USB port cannot be used for video or audio streaming simultaneously.

Important Safety Instructions

• Due to the enclosure material, the product must only be connected toa USB 2.0 or higher.
• The power cord shall connect to socket-outlet with earthing connection.
• The power supply should be installed near the equipment and for pluggable equipment, the socket-outlet must be easily accessible.
• Only use the power cord provided by the manufacturer. Using unauthorized power cord may cause danger and violate the authorization of the projector as well as the guarantee.
• Plug of the power cord is considered as the disconnect device. Once unplugged, the main unit is considered as disconnected from the power source.
• Do not use the device in an environment where the temperature is too high or too low. Never expose the device to strong sunshine or wet environments.
• The suitable temperature range for this product and its accessories is 32°F-104°F / 0°C-40°C. It is recommended to supply the device in an environment with a temperature that ranges from 41°F-77°F/5°C~25°C.
• When supplying, place the device in an environment that has a normal room temperature and good ventilation.
• Possibly hazardous optical radiation emitted from this product, do not stare at operating beam. Maybe harmful to the eyes.

CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.

This product complies with the radio interference requirements of the European Community.
Declaration of Conformity
Hereby, Anker Innovations Limited. declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. For the Declaration of Conformity, visit the Web site https://uk.seenebula.com/ RF exposure information: The Maximum Permissible Exposure (MPE) level has been calculated based on a distance of d=20 cm between the device and the human body. To maintain compliance with RF exposure requirement, use product that maintain a 20cm distance between the device and human body.

The following importer is the responsible party (contact for EU and UK matters) Anker Innovations Deutschland GmbH | Georg-Muche-Strasse 3, 80807 Munich, Germany Anker Technology (UK) Ltd.| Suite B, Fairgate House, 205 Kings Road, Birmingham, B11 2AA, United Kingdom

Your product is designed and manutactured with high quality materials and components, which can be recycled and reused.

This symbol means the product must not be discarded as household waste, and should be delivered to an appropriate collection facility for recycling. Proper disposal and recycling helps protect natural resources, human health and the environment. For more information on disposal and recycling of this product, contact your local municipality, disposal service, or the shop where you bought this product.

Declaration of Conformity
Hereby, Anker Innovations Limited declares that this device is in compliance with Radio Equipment Regulation 2017. The full text of the UK declaration of conformity is available at the following internet address: https://uk.seenebula.com

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interterence to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radio Frequency Exposure Statement
The device has been evaluated to meet general RF exposure requirements. The device can be used in fixed/mobile exposure condition. The min separation distance is 20cm.
Notice: Shielded cables All connections to other computing devices must be made using shielded cables to maintain compliance with FCC regulations.

IC Statement:

This device complies with Innovation, Science and Economic Development Canada licence exempt RSS standard(s). Operation is subject to the following two conditions: this device may not cause interference, and this device must accept any interference, including interference that may cause undesired oneration ofthe device”

ICRF Statement:

When using the product, maintain a distance of 20cm from the body to ensure compliance with RE exposure requirements.

The following importer is the responsible party. Company Name: Fantasia Trading LLC Address: 530 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764
Telephone: 1-800-988-7973)

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>