abi FORCE Z-23 Aerator Zero-Turn Infield Groomer and Laser Grader User Guide
- June 5, 2024
- abi FORCE
Table of Contents
abi FORCE Z-23 Aerator Zero-Turn Infield Groomer and Laser
Parts
- Single Chain Link
- 11 Link Chain
- Snap Hook
- ¼” x 1” long Bolt (2)
- 5/16” Washer (2)
- ¼” lock nut
- Chain Cover
- Zip Tie (2)
- 7/8” Hitch Pin
- . 3/8” Lynch Pin
TOOLS
7/16” wrench (2), diagonal cutters
Setup
- Slide Chain Cover over 11 Link Chain and secure with Zip Ties on ends.
- Attach Snap Hook to end of Chain, trim Zip Tie ends.
- Under the front of the Force, install the Lynch Pin on the connection pin already attached.
- Under the mid point of the Force install the 11 Link Chain assembly using ¼” hardware. Make sure the 5/16 washer clamps the end chain link to the frame as shown. The chain should hang on the right side of the cylinder.
- The single link mounts the same way on the left side of the machine at the highest point.
- Connect Snap Link to Single Chain Link for storage, being sure not to capture any hoses.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>