BOYUXON 118A-15W Fully Automatic Wireless Car Charging Bracket User Manual

BOYUXON 118A-15W Fully Automatic Wireless Car Charging Bracket

Thanks for your purchase. For a better experience. please read this manual carefully before you use this product.

Package contents

Note:

1. For optimal performance. remove your protective phone case and other metals or magnetic object x3shmlace your phone properly in the wireless charging area.
2. A Quick Charge 3.0 or Quick Charge 2.0 enabled power adapter is required for the fast charge wireless charging feature. Power adapters are not included. It is recommended to use the included Type-USB charging cable or a 2A charging cable.
3. For some devices without a Qi function, you may need to buy a Qi-compatible receiver separately to activate the wireless charging function.
4. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions
   (1)this device may not cause harmful interference, and
   (2) this device must accept any interference received, including interference that may cause undesired operation.

Product Specification

LED Indicator

FCC warning

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body.

Product Overview

Product Size

Component assembly

1. Put the fixed nut on the spinning ball.
2. Insert the spinning ball into the screw post behind the wireless charger. Then rotate the fixed nut to the proper tightness
3. Open the vent clip
4. Insert the clip into the vent of the car and make the clip clamp one of the vent fins. Adjust the support foot to get the right angle of view.
5. Insert the type-C charging cable into the socket and the other end into the car USB power output port or car adapter
6. Put your mobile phone that supports wireless charging on the bracket. It will automatically clamp the phone and start charging

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>