ELEIKO 3085632 Sit Up Bench User Manual

October 30, 2023
ELEIKO

ELEIKO 3085632 Sit Up Bench

READ BEFORE INSTALLATION AND USE

Install and use this equipment in a place where access and supervision are specifically controlled by the owner. Be sure to install the equipment on a stable base and level the equipment properly. Eleiko recommends that all equipment is installed by a licensed contractor or an Eleiko installer. This equipment is intended for indoor use only.

SAFETY INSTRUCTIONS
It is the responsibility of the purchaser of ELEIKO products to instruct all users and supervising personnel on the proper usage of the equipment.

  1. All included warnings (labels) and instructions MUST be read before the use of any Eleiko equipment. Only use the equipment as it is intended.
  2. A user MUST get a medical examination and proper instructions before using any Eleiko equipment.
  3. DO NOT let anyone, under any circumstances, use equipment that appears to be damaged. Do not try to repair any equipment before consulting an Eleiko technician.
  4. DO NOT replace components of Eleiko equipment with other, none Eleiko, equipment (magnetic safety pin, frames, bars, etc.). Do not improvise! If there are any doubts, consult an Eleiko representative prior to any intervention.
  5. DO NOT overload the equipment and DO NOT try to exceed personal strength levels.
  6. Children under the age of 14 must be supervised by an adult.
  7. DO NOT remove any safety labels from the Eleiko equipment. Eleiko is not responsible if a label is removed. Replace damaged labels immediately.
  8. Eleiko packaging for products an be made of wood. Be aware of splinters! You MUST use protective gloves and proper workwear.
  9. Eleiko packaging material could be a risk when handling. Be aware of crushing! You MUST use work wear including protective gloves and hard shoes.
  10. Eleiko products and packing material are heavy, You MUST use proper lifting techniques, work wear and hard shoes.

LIST OF COMPONENTS

ELEIKO-3085632-Sit-Up-Bench- \(1\) ELEIKO-3085632
-Sit-Up-Bench- \(2\)

ASSEMBLY INSTRUCTIONS

Before assembly, make sure you have enough clearance on all sides of the equipment, not less than 0,6 meters. Take in account the accessibility to remove and replace bar and weights.

TOOLS NEEDED
You need the following tools to assemble the equipment.

NOTE: Do not use electric power tools for assembly.

ELEIKO-3085632-Sit-Up-Bench- \(5\) ELEIKO-3085632
-Sit-Up-Bench- \(6\) ELEIKO-3085632
-Sit-Up-Bench- \(7\) ELEIKO-3085632
-Sit-Up-Bench- \(8\) ELEIKO-3085632
-Sit-Up-Bench- \(10\) ELEIKO-3085632
-Sit-Up-Bench- \(11\) ELEIKO-3085632
-Sit-Up-Bench- \(12\) ELEIKO-3085632
-Sit-Up-Bench- \(13\) ELEIKO-3085632
-Sit-Up-Bench- \(14\) ELEIKO-3085632
-Sit-Up-Bench- \(15\) ELEIKO-3085632
-Sit-Up-Bench- \(16\) ELEIKO-3085632
-Sit-Up-Bench- \(17\) ELEIKO-3085632
-Sit-Up-Bench- \(18\) ELEIKO-3085632
-Sit-Up-Bench- \(19\) ELEIKO-3085632
-Sit-Up-Bench- \(20\) ELEIKO-3085632
-Sit-Up-Bench- \(21\) ELEIKO-3085632
-Sit-Up-Bench- \(22\)

USER GUIDE

PURPOSE
Designed for training the abdominal muscles and building core strenght.

GENERAL INSTRUCTIONS FOR USE

  1. Only for indoor use.
  2. Use the knurled handle to easy get in and out of position.
  3. Position yourself with your back against the back rest and lock your feet with help of the rollers.

PRODUCT SPECIFICATION

  • Max user weight 150 kg / 330 lbs
  • Max training weight 350 kg / 770 lbs
  • Product weight 35 kg / 77 lbs
  • Dimensions (L x W x H) 1357 x 706 x 865 mm 53,4 x 27,8 x 34,1″

DIMENSION

ELEIKO-3085632-Sit-Up-Bench- \(23\)

CARE AND MAINTENANCE

PREVENTIVE MAINTENANCE AND INSPECTIONS
NOTE: The safety level of the equipment can only be maintained if it is examined regularly for damage and wear.

  • Daily:
    • Cleaning of upholstery.
  • Regularly:
    • Clean surfaces on the frames and tubes from dust and dirt.
    • Check that all bolts between parts, walls and floors are properly tightened, according to recommendations.
    • Check equipment for sharp edges. Replace parts with sharp edges.
    • Check equipment structural frames and welds to ensure they are free from cracks, irregularities or any other abnormalities. If in doubt, consult an Eleiko representative before product use.
  • Cleaning and Care:
    • Apply a mild soap detergent to a lint-free cloth, then wipe down product surface.
    • While it is safe to use an alcohol-based neutral pH7 solution on surface-treated steel elements of the benches and racks, take care to avoid pads and cushions.
    • We recommend alcohol-free, bleach-free, and o-phenyl phenol (OPP) ammonia-free wipes.

See also www.eleiko.com.

SPARE PARTS AND SERVICE
Contact Eleiko for spare parts and service:

Eleiko Group AB | Klastorpsvägen 18 | SE-302 62 HALMSTAD | Sweden
E-mail: info@eleiko.com
Phone: +46 35 17 70 70
www.eleiko.com

WARRANTY

All products manufactured by ELEIKO are warranted to the original purchaser to be free from defects in workmanship and / or materials under normal use or service as follows:

  • 10 years on structural frame welds (NOT on moving parts).
  • 1 year on wear and tear parts.
  • 1 year on polyurethane upholstery.
  • 6 months on skai-leather upholstery.

Normal wear and tear do not fall under the 10-year warranty.

Eleiko Group AB | Klastorpsvägen 18 | SE-302 62 HALMSTAD | Sweden
E-mail: info@eleiko.com
Phone: +46 35 17 70 70
www.eleiko.com

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals