VOLT POLSKA SINUS 600 Pure Sine Wave Voltage Inverter Instruction Manual
- July 29, 2024
- VOLT POLSKA
Table of Contents
- VOLT POLSKA SINUS 600 Pure Sine Wave Voltage Inverter
- Product Information
- Product Usage Instructions
- INTRODUCTION
- GENERAL INFORMATION ON SAFETY
- INSTALLATION OF THE DEVICE
- TECHNICAL PARAMETERS
- WARRANTY CARD
- Proper disposal of the product
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
VOLT POLSKA SINUS 600 Pure Sine Wave Voltage Inverter
Product Information
Specifications:
- Models: SINUS 600, SINUS 1000, SINUS 1600, SINUS 2000, SINUS 3000, SINUS 4000, SINUS 5000
- Input Voltage: 10.5 V – 15.5 V (for 12V DC), 21 V – 31 V (for 24V DC)
- Output Voltage: 225 V – 235 V AC
- Output Voltage Frequency: 50 Hz (+- 2 Hz)
- Efficiency at Full Load: > 92%
- Working Temperature: 0-40°C
Product Usage Instructions
-
Installation of the Device:
Ensure to follow the installation guidelines provided in the manual to set up the inverter correctly. -
General Information on Safety:
Keep the manual in an easily accessible place and familiarize yourself with its content before starting up the inverter to ensure safe operation. -
Technical Parameters:
All SINUS inverters come with safety features for trouble-free operation. -
Using the Inverter:
-
Connect the input power source to the inverter based on the specified voltage range.
-
Connect the output load to the inverter ensuring it does not exceed the specified power ratings.
-
Power on the inverter and monitor the output voltage and frequency to ensure they are within the specified ranges.
-
Use the inverter in a well-ventilated area within the recommended temperature range.
FAQ:
-
Q: What should I do if the inverter exceeds the specified temperature range?
A: If the inverter exceeds the recommended temperature range, power it off and allow it to cool down before using it again to prevent damage. -
Q: Can I connect multiple devices to the inverter simultaneously?
A: Ensure that the total power consumption of all connected devices does not exceed the maximum continuous or peak power output of the inverter to avoid overloading.
PURE SINE WAVE VOLTAGE INVERTER
- 12V DC to 230V AC
- 24V DC to 230V AC
Models in series:
SINUS 600, SINUS 1000, SINUS 1600, SINUS 2000, SINUS 3000, SINUS 4000, SINUS
5000
INTRODUCTION
SINUS voltage inverter should be used to power electrical appliances requiring 230V from 12V or 24V (depending on the selected voltage version) batteries and automotive installations. It can be successfully used as an emergency power source for devices requiring continuous power supply, such as furnaces or CO pumps. The distinguishing feature of the SINUS inverters from the classic simple AC/DC inverters is pure sine wave sinusoidal alternating output voltage identical to that present in mains in buildings. SINUS inverters can be used as a power supply for devices equipped with electric motors and transformers, such as power tools, pumps, or low-power household appliances. Simple and inexpensive inverters mostly produce close to rectangular voltage, sometimes mistakenly called approximated sinus wave. This kind of voltage signal is not suitable;e for inductive or capacitive devices and may cause damage. Using our SINUS inverters you can be 100% sure that output voltage is pure sine wave.
GENERAL INFORMATION ON SAFETY
THIS MANUAL IS INTEGRAL PART OF THE DEVICE. DON’T THROW IT AWAY, KEEP IT IN AN EASILY ACCESSIBLE PLACE AND GET KNOWN WITH ITS CONTENT BEFORE THE FIRST STARTUP OF THE INVERTER.
- Don’t expose the inverter to direct rain, snow, dust, chemicals, oils, etc.
- Don’t cover the ventilation openings. Inverter should be installed in an easily accessible location with a minimum of 30 cm of free space around the enclosure to ensure free circulation of the air, otherwise, the unit may be exposed to overheating (minimum air flow rate is 145 CFM).
- To reduce the risk of fire or electric shock make sure that the existing wiring is in good condition and the wires have the correct parameters (cross-section, length, etc.) Don’t operate the inverter with damaged or incomplete wiring.
- In the event of a fire, use a fire extinguisher designed to put out the fire on live electrical equipment under its operating instructions.
- This device contains components that may cause sparks. To avoid fire and/or explosion, do not install devices near flammable materials, or in places where there are non-fire devices. This includes any location where petrol-powered machines, fuel tanks, connectors, binders, or other connections between fuel system components are stored.
- Do not open/remove housing from the inverter. The appliance does not contain any maintenance parts. Attempting to repair may result in electric shock or fire. Capacitors inside the device remain charged when the power is disconnected.
- Don’t connect continuous and instantaneous loads greater than those specified in the unit’s operating instructions.
- The inverter must be powered by a rechargeable battery or automotive electrical system (installation must have a rechargeable battery)
- Don’t charge the battery (with rectifier, pulse generator, solar controller, etc.) when the inverter is connected and powered by the same battery, this type of connection may damage the inverter and will validate the warranty (we recommend sinusPRo series models for this type of usage)
INSTALLATION OF THE DEVICE
Please observe the warnings and notes in the previous section during the process of installation. To connect the device, first connect wires to the inverter and then according to the polarity (+ and -) connect them directly to the battery. Correct polarity of the input is very important and necessary, because reverse polarity may damage the inverter and void the warranty.
When installing the inverter, be sure to choose the right battery (type and capacity) for direct connection to the device. An overloaded battery will have a much higher capacity than the one supplied by the manufacturer and will be instantly discharged or even damaged. We recommend using lead-acid batteries for continuous operation such as GEL, AGM, or good quality acid deep discharge batteries rather than regular starter batteries.
TECHNICAL PARAMETERS
All SINUS inverters come with a range of safety features to ensure safe and trouble-free operation.
-
Short-circuit protection
Thermal protection – switches off the device after about 60 – 70C -
Undervoltage protection – switches off the device if the input voltage is too low (discharge of the battery)
-
Overvoltage protection – switches off the device when the overheated temperature is too high
-
Overload protection – turns off the device when it is overloaded for more than a dozen of seconds
-
Idle load – 300 mA
SINUS 600
Continuous power | 300 W | 300 W |
---|---|---|
Instantaneous (peak) power | 600 W | 600 W |
Input voltage | 10.5 V – 15.5 V | 21 V – 31 V |
Output voltage | 225 V – 235 V | 225 V – 235 V |
Output voltage frequency | 50 Hz (+- 2 Hz) | 50 Hz (+- 2 Hz) |
Efficiency at full load | > 92 % | > 92 % |
Working temperature | 0-40 C | 0-40 C |
SINUS 1000
Continuous power | 500 W | 500 W |
---|---|---|
Instantaneous (peak) power | 1000 W | 1000 W |
Input voltage | 10.5 V – 15.5 V | 21 V – 31 V |
Output voltage | 225 V – 235 V | 225 V – 235 V |
Output voltage frequency | 50 Hz (+- 2 Hz) | 50 Hz (+- 2 Hz) |
Efficiency at full load | > 92 % | > 92 % |
Working temperature | 0-40 C | 0-40 C |
SINUS 1600
Continuous power | 800 W | 800 W |
---|---|---|
Instantaneous (peak) power | 1600 W | 1600 W |
Input voltage | 10.5 V – 15.5 V | 21 V – 31 V |
Output voltage | 225 V – 235 V | 225 V – 235 V |
Output voltage frequency | 50 Hz (+- 2 Hz) | 50 Hz (+- 2 Hz) |
Efficiency at full load | > 92 % | > 92 % |
Working temperature | 0-40 C | 0-40 C |
SINUS 2000
Continuous power | 1000 W | 1000 W |
---|---|---|
Instantaneous (peak) power | 2000 W | 2000 W |
Input voltage | 10.5 V – 15.5 V | 21 V – 31 V |
Output voltage | 225 V – 235 V | 225 V – 235 V |
Output voltage frequency | 50 Hz (+- 2 Hz) | 50 Hz (+- 2 Hz) |
--- | --- | --- |
Efficiency at full load | > 92 % | > 92 % |
Working temperature | 0-40 C | 0-40 C |
SINUS 3000
Continuous power | 1500 W | 1500 W |
---|---|---|
Instantaneous (peak) power | 3000 W | 3000 W |
Input voltage | 10.5 V – 15.5 V | 21 V – 31 V |
Output voltage | 225 V – 235 V | 225 V – 235 V |
Output voltage frequency | 50 Hz (+- 2 Hz) | 50 Hz (+- 2 Hz) |
Efficiency at full load | > 92 % | > 92 % |
Working temperature | 0-40 C | 0-40 C |
SINUS 4000
Continuous power | 2000 W | 2000 W |
---|---|---|
Instantaneous (peak) power | 4000 W | 4000 W |
Input voltage | 10.5 V – 15.5 V | 21 V – 31 V |
Output voltage | 225 V – 235 V | 225 V – 235 V |
Output voltage frequency | 50 Hz (+- 2 Hz) | 50 Hz (+- 2 Hz) |
Efficiency at full load | > 92 % | > 92 % |
Working temperature | 0-40 C | 0-40 C |
SINUS 5000
Continuous power | 2500 W | 2500 W |
---|---|---|
Instantaneous (peak) power | 5000 W | 5000 W |
Input voltage | 10.5 V – 15.5 V | 21 V – 31 V |
Output voltage | 225 V – 235 V | 225 V – 235 V |
Output voltage frequency | 50 Hz (+- 2 Hz) | 50 Hz (+- 2 Hz) |
Efficiency at full load | > 92 % | > 92 % |
Working temperature | 0-40 C | 0-40 C |
WARRANTY CARD
- DEVICE TYPE
- SALE DATE
- BUYER’S DETAILS (name etc.)
- SELLER’S DETAILS (company name etc.)
- SERVICE INFO (damage info etc.)
FILL IN IF NEEDED
(*) Cross incorrect
I agree to pay the cost of inverter repair due to:
expiration of the warranty period/* warranty void
- Before proceeding with the repair, the service will inform you by phone about the exact costs of the repair.
- Please attach a copy of the purchase document (receipt or invoice) to the complaint. The full regulations of service repairs can be found on our website www.voltpolska.pl.
Proper disposal of the product
(waste electrical and electronic equipment)
The marking placed on the product or in the texts related to it indicates that
it should not be disposed of with other household waste at the end of its
useful life. To avoid harmful effects on the environment and human health from
uncontrolled disposal, please separate this product from other types of waste
and recycle responsibly to promote the reuse of material resources as a
continuing practice. For information on where and how to recycle this product
in an environmentally safe manner, residential users should contact the
retailer where they purchased the product or their local government authority.
Business users should contact their suppliers and check the terms and
conditions of their purchase contracts. The product should not be disposed of
with other commercial waste.
pomoc@voltpolska.pl | hurt@voltpolska.pl | (58) 500 85 62.
References
- Zasilanie awaryjne, akumulatory, przetwornice| VOLT POLSKA
- Zasilanie awaryjne, akumulatory, przetwornice| VOLT POLSKA
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>