ONN LACC104 10W Wireless Charging Pad Compatible User Manual

2 in 1 Magsafek Wireless Charger
Model: WIBWHI100093977
PRODUCT GUIDE
April 06,2022_VOI

What is in the box?

1. 2 in 1 Magsafex Wireless charger
2. 30W Adapter
3. User Manual

Get to know your 2-in-1 Magsafe. Wireless charger

Compatibility

• Made for iPhone 13 Pro Max, iPhone 13 Pro, iPhone 13, ‘Phone. 13 minis, anon, 12 Pro Max, iPhone 12 Pro, iPhones 12 and iPhone’ 12 mini (I5W for iPhone° 13 and iPhone 12 series, 7.5W for iPhone° 8 versions and newer)
• Made for AirPods 2(need to have wireless charging Case), AirPods 3, AirPods Pro
• Also charges with other Qi-enabled devices

How to charge your devices.
Connect to Power Supply
Connect to the 30W adapter before plugging it into the power outlet for the power supply

• Begin to charge
• Remove any foreign object (if any)
  Example: Magnet, holder, key or card

“Thick protective case ≥5mm or a case includes a magnet or metallic material, may not allow proper charging function.

Power:

Provide power to the MagSafe Charging using Apple-branded compatible power adapters, or third-party power adapters that are compliant with applicable country regulations and international and regional safety standards, including the Standards for Safety of Information Technology Equipment (IEC 60950-1) and the Standards for Safety of Audio/Video, Information and Communication Technology Equipment (1EC 62368-1). Other adapters may not meet applicable safety standards, and using them could pose a risk of death or injury.
Recommended Power Adapter Specifications

• Frequency: 50 to 60 Hz, single phase
• Line Voltage: 100 to 240 VAC
• Output Voltage/Current: 9 VDC/3.3A
• Minimum Power Output: 30W
• Output Port 3.5nun DC Jack

Important Safety Instructions:

Don’t use the MagSafe Charger or the DC Jack power adapter in wet locations, such as near a sink, bathtub, or shower stall, and don’t connect or disconnect them with wet hands. Disconnect the MagSafe. Charger, its cable, and the power adapter if any of the following conditions exists: You want to clean the MagSafe Charger or the power adapter; the power cord or plug becomes frayed or otherwise damaged; the MagSafe Charger, its cable, or the power adapter is exposed to rain, excessive moisture, or liquid; or the MagSafe Charger, its cable, or the power adapter has been dropped, damaged, or you suspect it has been serviced or repaired. When you use the DC Jack power adapter, make sure the cable is fully inserted into the power adapter before you plug the adapter into a power outlet.
When using the MagSafe Charger, remove metallic cases and avoid placing metallic foreign objects on it (for example, keys, coins, batteries, jewelry), as they may interfere with charging or become warm enough to cause discomfort or injury if your skin comes into contact with them. Don’t place any item with an RFID tag (for example, a contactless credit card, passport, or access card) on the MagSafe Charger, because the RFID tag could be damaged.
Medical Device Interference:
The MagSafe Charger contains magnets and radios that emit electromagnetic fields. These electromagnetic fields may interfere with medical devices, such as pacemakers and defibrillators. Consult your physician and medical device manufacturer for information specific to your medical device and whether you and the MagSafe Charger. If you suspect the MagSafe Charger is interfering with your medical device, stop using the MagSafe Charger.

FCC Statement:

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (I) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Warning:
Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/ TV technician for help.

Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Need help? We’re here for you every day from 7 a.m.-9 p.m. CST Give us a call at 1-888-516-2630

We’d love to hear from you. Scan with your Walmart app and let us know what you think. April 06,2022_VO1

Documents / Resources

| ONN LACC104 10W Wireless Charging Pad Compatible [pdf] User Manual
LACC104, 2APXNLACC104, Charging Pad Compatible, Compatible, 10W Wireless, LACC104
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>