CONCRETTI B08HPGWNSW Handmade Oval Vessel Bathroom Sinks Installation Guide

CONCRETTI B08HPGWNSW Handmade Oval Vessel Bathroom Sinks

VESSEL SINKS

INSTALLATION GUIDE
Installinga concrete sink is a little different from installing a porcelain sink. Please read all instructions carefully as you proceed, for the best and most long lasting results.

1. Make sure your surface top and sink are both clean.
2. Apply an even amount of 100% silicone to the underside of sink and ensure a 2″ 3″ gap between edge and silicone. Carefully wipe away any excess.
3. Be sure to align sink with drain hole. Once aligned, press down into basin or bench top. Remove excess silicone with a microfiber cloth.
4. Run clear silicone around the base of the sink to fill any gaps. Smooth with wet cloth and wipe clean.
5. Generously apply plumbers putty to the drain opening.
6. Slide the drain into place. Hand tightens. Push plumbers putty between the drain and the sink. Wipe clean and smooth. Let dry for at least 24 hours.

WALL MOUNT SINKS

INSTALLATION GUIDE
Make sure your wall is suitable for wall mounting! You may need to reinforce your wall before installing your new sink installing a wall mount sink requires plumbing knowledge. You will need to consult a professional to make sure your rough in is up to code.

1. Use the studfinder to find a suitable fixing point for your brackets. Then measure where you want the bottom of the basin to go, as well as the center of the sink. 
2. Remark the area where the bottom of your basin will go with a level and pencil. This will be your guide as to where the top of the bracket will sit.
3. Hold the bracket up to the line and mark the holes with a pencil. Once you are sure the placement is correct, affix the bracket onto your wall with the correct bolts for your wall.
4. Place sink on bracket to accurately mark the faucet centerline with a pencil, but do not glue down the sink yet. After marking, remove sink and consult a plumber for faucet installation.
5. Once faucet installation is complete, apply a generous amount of JOO% silicone to top of bracket. Place sink on top, making sure it is aligned with the faucet. Remove any excess silicone with microfiber towel.
6. Once silicone is dried and sink is tightly secured to wall bracket, you may finish attaching the drain, and bottle trap.

BUCKET SINKS

INSTALLATION GUIDE
Make sure your wall is suitible for wall mounting! You may need fo reenforce your wall Before instaling your new sink. Installing a wall mount sink requires plumbing knowledge. You will need to consult a professioncl fo make sure your rough in is up to code.

1. Use the stud finder to find a suitable fixing point for your brackets. Then measure where you want the bottom of the basin to go, as well as the center of the sink.
2. Remark the area where the bottom of your basin will go with a level and pencil. This will be your guide as to where the top of the bracket will sit.
3. Hold the bracket up to the line and mark the holes with a pencil. Once you are sure the placement is correct, affix the bracket onto your wall with the correct bolts for your wall.
4. Place sink on bracket to accurately mark faucet holes with pencil. Do not glue down yet! After marking, remove sink and consult professional for rough in installation.
5. Once rough in valve installation is complete, apply a generous amount of JOO% silicone to top of bracket. Place sink on top, making sure it is aligned with rough in valve for the faucet instillation. Remove any excess silicone with microfiber towel.
6. Once silicone is dried and sink is tightly secured to wall bracket, you may finish attaching faucet, drain, and bottle trap.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>