Elgato SKU 10AAJ9901 Wave Panels Starter Set User Guide

Elgato SKU 10AAJ9901 Wave Panels Starter Set

**Contents

**

Assemble EasyClick frames

NOTE: Clean frame surface with rubbing alcohol or silicone-free glass cleaner before applying tesa adhesive strips. Clean wall surface with a dust- free cloth. Attach white side of self-adhesive strips to EasyClick frames, blue side must point towards the wall. tesa adhesive strips are not suitable for use on vinyl wallpapers, anti-stick surfaces and porous materials such as styrofoam, fabric, etc. For removing, hold EasyClick frame firmly without pressing and pull tesa adhesive strips downwards approx. 25 cm in parallel to the wall.

Mount on smooth wall

Mount on textured wall

NOTE:

• Mount a panel with a single screw and let it hang in place.
• Use a spirit or laser level for accurate orientation.
• Appropriate mounting materials must be selected according to wal conditions.

Connect Easy Click frames

NOTE: Use a combination of tesa”adhesive strips, clips, and a few screws to achieve maximum stability with minimal drilling.

Apply acoustic foam

• Be especially careful when setting up near children (small parts pose choking hazard).
• Do not attach items to the panels.
• Do not leave panels exposed to direct sunlight.
• Do not set up in areas susceptible to strong air currents.
• Only mount on straight walls. Do not mount panels on ceilings.

Get creative and enjoy

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>