simaluba SL09 Biodegradable Grease Instruction Manual

simaluba SL09 Biodegradable Grease Instruction Manual

Define installation type, lubricant, lubricator size, dispensing time,

and accessories

• Direct installation

• Indirect installation

• simalube lubricators can be installed in all positions, even underwater.

• Use “Calculation Pro” to choose correct lubricant, dispensing time, and lubricator size.
  (“Calculation Pro” is available at www.simatec.com, in the App Store, and in the Android Market.)

Prepare lubrication point

• Clean lubrication point

• Remove connector nipple

• Screw in reducing nipple
  (if necessary, seal lubrication point)

• Lubricate the grease lines with a grease gun
  (fill tubes completely)
  

Install and activate simalube

• Cut off plug from lubricator or remove black plug

• Activate dispensing time with 3 mm Allen key

• Write in activation date
  

• Screw in lubricator

• Regularly check simalube
  

Dispose of simalube correctly

• Either refill or dispose of empty lubricators

• a) Remove cover disk
  b) Remove gas generator with a socket wrench (SW21mm)
  

• Dispose of intact gas generator in battery recycling and empty housing in plastic recycling.
  ( Warning: dispose of leftover grease separately )
  

simatec ag
Stadthof 2
CH-3380 Wangen a. Aare

Tel.: +41 (0)32 636 50 00
Fax.: +41 (0)32 636 50 19
welcome@simatec.com
www.simatec.com

References

• simatec | Innovative maintenance solutions for bearings | simatec

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>