Angekis U2-10FHD3 Blade VS 4K PTZ Camera User Manual
- June 5, 2024
- Angekis
Table of Contents
Angekis U2-10FHD3 Blade VS 4K PTZ Camera User Manual
SAFETY GUIDES
- Before operating the camera, please read and follow all the instructions in the manual. For safety reasons, always keep this user manual close to the camera.
- The Blade VS’s power input range is 100-240VAC (50-60Hz). Always ensure the power supply input is within this rate before turning it on.
- The camera power voltage is 12VDC with a rated currency of 1.5A. We recommend that you use it with the original power supply adapter supplied by the factory.
- Please keep the power cable, video cable and control cable in a safe place. Protect all cables especially the Connectors.
- Operational environment: 0”C-50”C with humidity less than 90%. To avoid any danger, do not put anything inside the Camera and keep out from corrosive liquid.
- Avoid stress, vibration and damp during transportation, storage and installation.
- Do not detach the camera housing and cover. If there’s a need for service, contact your authorized technicians.
- IR cable and control cable should be individually shielded and cannot be substituted with other cables. Do not direct the camera lens towards strong light (sun or intensive light).
- Use a dry cloth to clean the camera housing. Apply it with a neutral cleaning agent to clean. To avoid damage on the camera lens, never use strong or abrasive cleaning agents on the camera housing.
- Do not move the camera by holding the camera head. To avoid any mechanical issues, do not use your hands to rotate the camera head.
- Place the camera on a fixed and smooth desk or base and avoid leaned Installation.
- Power Supply Polarity (Drawing)
ACCESSORIES
Check all bellow items when open the package:
- Camera 1 PCS
- Power Adapter 1 PCS
- Power Cable 1 Pcs
- RS232 Control Cable 1 Pcs
- USB2.0 Cable 1 PCS
- Remote Controller 1 PCS
- User Manual 1 Pcs
- Double-sided Adhesive 1 Pcs
QUICK START
-
Ensure to check all cable connection before turning it on
-
Dial Switch Setting (at the bottom of the camera):
FUNCTION(IR CODE TYPE)
| SW-3| SW-4| Instruction
1| OFF| OFF| Undefined
2| ON| OFF| Undefined
3| OFF| ON| Undefined
4| ON| ON| Undefined
FUNCTION (USB)
| SW-5| SW-6| Instruction
1| OFF| OFF| Undefined
2| ON| OFF| Undefined
3| OFF| ON| Undefined
4| ON| ON| Undefined
FUNCTION (ARM)
| SW-1| SW-2| Instruction
1| OFF| OFF| Updating mode
2| ON| OFF| Debugging mode
3| OFF| ON| Undefined
4| ON| ON| Working mode
PRODUCT HIGHLIGHTS
The New Blade VS delivers an amazing suite of features and maintains the beautiful optics you have come to expect from Angekis. Technical improvements and a class leading build quality compliment the Blades brilliantly sharp resolution and stunning colour reproduction, all at a ground breaking price. Not only that, this stylish looking camera is ideal for cloud-based conferencing!
- 10x Optical zoom and 10x Digital zoom option
- Full HD resolution at 3Qps via USB 2.0 Video format YUY2 and MJPG
- 1/2.8 inch, 2.1MP CMOS
- Rapid switching between different video formats: less than 1 second
- Easy fimware upgrade
- USB2.0 high speed output
- Compatible with the major videoconferencing software (UVC1.5 protocol standard)
- 62.5° FOV and 350° pan rotation
- Visca over USB2.0, RS232 up to 128 pre-sets
- IR remote controller with 10 pre-sets
- Zoom Room remote Controller supported
- On screen NECC via custom Angekis app Video mute control
- Kensington lock hole
- 3D noise reduction
- Day/Night vision switch
Product Specification
| Resolution | MJPG | 1080P301( 720P301( 640x480p30 |
|---|---|---|
| YUV | 640x480p30 | |
| Video output | USB2.0 | |
| Sensor | 1/2131non, 21W CM03 | |
| Lens | F4.7 –-47 mm(10X), F1.8- 14, HFOV:62.51 Wide)•6.431 Tel) | |
| P/T Ramon | Pan: *170% Till:-30°-+90°,Mountable | |
| P/T speed | Pan: 0.1 °-120°!s; Tilt: 0.1 °-80°/s | |
| Presets | 10 via IR remote selling. 128 via V1SCA control. preset accuracy |
:0.1°
Control| RS232. RS485 penal VISCA. PeRO-PIDI. U5132.0
(UVC1.1)
Mm. Lux| 0.01 lux
White balance| Automanual
Focus| Automanual
Iris| AutoManual
Shutter| Automanual
WDR| Supported
BLC| Supported
2 DNR| Supported
---|---
3 DNR| Supported
Inout voltage| DC12V
Dimension| 200mm 143mm 152mm
Net weight| 1.25 kg
CAMERA INTERFACE
- Camera Lens
- Camera Base
- IR Receiver Panel
- Indicator Light
- Dial Switch
- Tripod Screw Hole
- Installation Hole
- RS232 (VISCA IN) Port
- USB2.0 Port
- DC12V Power Input
- Power Indicator light
CAMERA DIMENSION(MM)
IR REMOTE CONTROLLER
**LED Function Instruction
**
Press any button and shows red: Current selection is to control the camera 1;
Press any button and shows green: Current selection is to control the camera
2;
Press any button and shows blue: Current selection is to control the camera 3;
CAM1/CAM2/CAM3
Short press to select the camera 1/2/3
Focus (Left): +/ – Manual focus, only valid under manual focus model;
Zoom (Right): +/ – Control the lens zoom rate;
Navigation : Up/Down/Left/Right
In normal working mode, use navigate key to control pan/tilt; Confirm/Home
button:
In normal working mode, short press to let the camera go back to Home
position.
Menu button: show the camera version
Number buttons
Set Preset : Long press(3 seconds) the number button to save preset;
Clear Preset : Clear + number button to clear the relative preset; Long
press(3 seconds) the Clear button to clear all preset;
Run Preset : Short press the number button to run the relative preset.
Power button
In normal work mode, short press one time, camera will enter standby mode;
short press again, the camera will start self-configuration and go to HOM E
position.
Camera address setting from remote control
- Power off other cameras in the room, then power on the camera wait to pair
- Holding CAM1/CAM2/CAM buttons to set need camera address K LED will flash 3 times showing you a successfully setting.
VISCA IN PORT
| No. | function |
|---|---|
| 1 | DTR |
| 2 | DSR |
| 3 | TXD |
| 4 | GND |
| 5 | RXD |
| 6 | A |
| 7 | IR OUT |
| 8 | B |
VISCA IN &RS485 Connection
| Camera VISCA IN | RS485 |
|---|---|
| 1 | DTR |
| 2 | DSR |
| 3 | TXD |
| 4 | GND |
| 5 | RXD |
| 6 | A(+) |
| 7 | R OUT |
| 8 | B(-) |
VISCA IN and DB9 Connection
Camera VISCA
IN| Windows DB -9
---|---
1| DTR| 6| DSR
2| DSR| 4| DTR
3| TXD| 2| RXD
4| GND| 5| GND
5| RXD| 3| TXD
6| A(+)| /| /
7| IR OUT| /| /
8| B(-)| /| /
Serial Port Configuration
| Parameter | Value | Parameter | Value |
|---|---|---|---|
| Baud rate | 2400, 9600,115200 | Stop Bit | 1bit |
| Start Bit | 1 bit | Verify Bit | None |
| Date Bit | 8 bit | / | / |
VISCA PROTOCOL
Part 1 Camera Return Command
Ack/Completion Message
| Command package| Note
ACK| Z0 41 FF| Returned when the command is accepted.
Completion| Z0 51 FF| Returned when the command has been executed
z= camera address + 8
Error messages
| Command package| Note
Syntax Error| z0 60 02 FF| Returned when the command format is diPerent or
when a command with illegal command parameters is accepted
Command Not Executable| z0 61 41 FF| Returned when a command cannot be
executed due to current conditions. For example, when commands controlling the
focus manually are received during auto focus.
Part 2 Camera Control Command
| Command | Function | Command package | Note |
|---|---|---|---|
| AddressSet | Broadcast | 88 30 01 FF | Address setting |
| IF_CIear | Broadcast | 88 01 00 01 FF | I/F Clear |
| CAM_Power | On | 8x 01 04 00 02 FF | Power ON/OFF |
| off | 8x 01 04 00 03 FF | ||
| Part 2 Camera Control CAM Zoom | Stop | 8x 01 04 07 00 FF | |
| Tele (standard) Command | 8x 01 04 07 02 FF | ||
| Wide(Standard) | 8x 01 04 07 03 FF | ||
| Tele(Variable) | 8x 01 04 07 2p FF | ||
| Wide(Variable) | 8x 01 04 07 3p FF | p = 0(low)-7(high) | |
| Direct | 8x 01 04 47 0p 0q 0r 0s FF | pqrs: Zoom Position | (0(wide) |
| CAM Focus | Stop | 8x 01 04 08 00 FF | |
| Far(Standard) | 8x 01 04 08 02 FF | ||
| Near(Standard) | 8x 01 04 08 03 FF | ||
| Direct | 8x 01 04 48 0p 0q 0r 0s FF | pqrs: Focus Position | |
| One Push AF | 8x 01 04 18 01 FF | ||
| CAM_ZoomFocus | Direct | 8x 01 04 47 0p 0q 0r 0s 0t 0u 0v 0w FF | pqrs: Zoom |
| Position 0x4000(teIe)) tuvw: Focus Position | (0(wide)- | ||
| CAM_WB | Auto | 8x 01 04 35 00 FF | |
| Indoor | 8x 01 04 35 01 FF | ||
| Outdoor | 8x 01 04 35 02 FF | ||
| OnePush | 8x 01 04 35 03 FF | ||
| --- | --- | --- | --- |
| Manual | 8x 01 04 35 05 FF | ||
| Outdoor Auto | 8x 01 04 35 06 FF | ||
| Sodium Lamp Auto | 8x 01 04 35 07 FF | ||
| Sodium Auto | 8x 01 04 35 08 FF | ||
| CAM_RGain | Reset | 8x 01 04 03 00 F | Manual Control of R Gain |
| up | 8x 01 04 03 02 FF | ||
| Down | 8x 01 04 03 03 FF | ||
| Direct | 8x 01 04 43 00 00 0p 0q FF | pq: R Gain (0-0xFF) | |
| CAM AE | Full Auto | 8x 01 04 39 00 FF | Automatic Exposure mode |
| Manual | 8x 01 04 39 03 FF | Manual Control mode | |
| Bright | 8x 01 04 39 0D FF | Bright mode(Manual control) | |
| CAM_Shutter | Reset | 8x 01 04 OA 00 FF | Shutter Setting |
| up | 8x 01 04 0A 02 FF | ||
| Down | 8x 01 04 0A 03 FF | ||
| Direct | 8x 01 04 4A 00 00 0p 0q FF | pq: Shutter Position (0-0x15) | |
| CAM_Iris | Reset | 8x 01 04 0B 00 FF | Iris Setting |
| up | 8x01040B 02 FF | ||
| Down | 8x 01 04 0B 03 FF | ||
| Direct | 8x 01 04 4B 00 00 0p 0q FF | pq: Iris Position (0- 0x11) | |
| CAM Gain | Reset | 8x 01 04 0C 00 FF | Gain Setting |
| up | 8x 01 04 0C 02 FF | ||
| Down | 8x 01 04 0C 03 FF | ||
| Direct | 8x 01 04 0C 00 00 0p 0q FF | pq: Gain Positon (0-0x0E) | |
| CAM_Bright | Reset | 8x 01 04 0D 00 FF | Bright Setting |
| / | up | 8x 01 04 0D 02 FF | |
| / | Down | 8x 01 04 0D 03 FF | |
| / | Direct | 8x 01 04 4D 00 00 0p 0q FF | pq: Bright I Positon () |
| CAM_WDR | On | 8x 01 04 3D 02 FF | WDR ON/OFF |
| / | OP | 8x 01 04 3D 03 FF | |
| --- | --- | --- | --- |
| / | Direct | 8x 01 04 D3 0p FF | pq: WDR Position (1-0x06) |
| CAM_BackLight | On | 8x 01 04 33 02 FF | BackLight On |
| OP | 8x 01 04 33 03 FF | BackLight OP | |
| CAM_Aperture | Reset | 8x 01 04 02 00 FF | Aperture Control |
| Up | 8x 01 04 02 02 FF | ||
| Down | 8x 01 04 02 03 FF | ||
| Direct | 8x 01 04 42 00 00 0p 0q FF | pq: Aperture Gain (0-0x04) | |
| CAM Memory | Reset | 8x 01 04 3F 00 0p FF | p: Memory Number(=0 to 127) |
Corresponds to 0 to 9 on the Remote Commander
Set| 8x 01 04 3F 01 0p FF
Recall| 8x 01 04 3F 02 0p FF
CAM LR Reverse| OP| 8x 01 04 61 02 FF| Image Flip Horizontal ON/OFF
8x 01 04 61 03 FF
CAM PictureFlip| On| 8x 01 04 66 02 FF| Image Flip Vertical ON/OFF
Off| 8x 01 04 66 03 FF
CAM_CoIorGain| Direct| 8x 01 04 49 00 00 00 0p FF| (0-0x0E)
CAM_2D Noise Reduction| Direct| 8x 01 04 53 0p FF| 0D OFF 1D ON
CAM_3D Noise Reduction| Direct| 8x 01 04 54 0p FF| 0:OFF 1DAUTO 2-5DLEVEL
FLICK| SOHZ| 81 01 04 23 01 FF|
60HZ| 81 01 04 23 02 FF|
Freeze| Freeze On| 81 01 04 62 02 FF| Freeze On Immediately
---|---|---|---
Freeze Off| 81 01 04 62 03 FF| Freeze OP Immediately
Preset Freeze On| 81 01 04 62 22 FF| Freeze On When Running Preset
Preset Freeze| 81 01 04 62 23 FF| Freeze Off When Running Preset
IR_Transfer| Transfer On| 8x 01 06 1A 02 FF| Receive IR(remote commander) CODE
from VISCA communication ON/OFF
Transfer Off| 8x 01 06 1A 03 FF
Pan tiltDrive| Up| 8x 01 06 01 W WW 03 01 FF| W: Pan speed 0x01 (low speed) to
0x18 (high speed)
WW: Tilt speed 0x01 (low speed) to 0x14 (high speed)
YYYY: Pan Position(TBD)
ZZZZ: Tilt Position(TBD)
Down| 8x 01 06 01 W WW 03 02 FF
Left| 8x 01 06 01 W WW 01 03 FF
Right| 8x 01 06 01 W WW 02 03 FF
Upleft| 8x 01 06 01 W WW 01 01 FF
Upright| 8x 01 06 01 W WW 02 01 FF
DownLeft| 8x 01 06 01 W WW 01 02 FF|
DownRight| 8x 01 06 01 W WW 02 02 FF|
StOp| 8x 01 06 01 W WW 03 03|
AbsolutePosition| 8x 01 06 02 W WW 0Y 0Y 0Y 0Y 0Z 0Z 0Z 0Z FF|
RelativePosition| 8x 01 06 03 W WW 0Y 0Y 0Y 0Y 0Z 0Z 0Z 0Z FF|
Home| 8x 01 06 04 FF|
Reset| 8x 01 06 05 FF|
Pan-tilt Limit Set| Set| 8x 01 06 07 00 OW 0Y 0Y 0Y 0Y OZ OZ OZ OZ FF| W:1
UpRight 0:DownLeft YYYY: Pan Limit Position(TBD) ZZZZ: Tilt Limit
Position(TBD)
Clear| 8x 01 06 07 01 OW 07 OF OF OF 07 OF OF OF FF
Part 3 Inquiry Command
| Command | Command Packet | Return Packet | Return Packet |
|---|---|---|---|
| CAM_PowerInq | 8x 09 04 00 FF | y0 50 02 FF | On |
| y0 50 03 FF | Off(Standby) | ||
| CAM_ZoomPosInq | 8x 09 04 47 FF | y0 50 0p 0q Or 0s FF | pqrs: Zoom Position |
| CAM_FocusModeInq | 8x 09 04 38 FF | y0 50 02 FF | Auto Focus |
| y0 50 03 FF | Manual Focus | ||
| CAM_FocusPosInq | 8x 09 04 48 FF | y0 50 0p 0q 0r 0s FF | pqrs: Focus Position |
| CAM_WBModeInq | 8x 09 04 35 FF | y0 50 00 FF | Auto |
| y0 50 01 FF | Indoor mode | ||
| y0 50 02 FF | Outdoor mode | ||
| y0 50 03 FF | OnePush mode | ||
| y0 50 04 FF | ATW | ||
| y0 50 05 FF | Manual | ||
| CAM_RGainlnq | 8x 09 04 43 FF | y0 50 00 00 0p 0q FF | pq: R Gain |
| CAM_BGainInq | 8x 09 04 44 FF | y0 50 00 00 0p 0q FF | pq: B Gain |
| CAM_AEModeInq | 8x 09 04 39 FF | y0 50 00 FF | Full Auto |
| y0 50 03 FF | Manual | ||
| y0 50 OA FF | Shutter priority | ||
| y0 50 0B FF | Iris priority | ||
| y0 50 0D FF | Bright | ||
| CAM_ShutterPosInq | 8x 09 04 4A FF | y0 50 00 00 0p 0q FF | pq: Shutter Position |
| CAM IrisPoslnq | 8x 09 04 4B FF | y0 50 00 00 0p 0q FF | pq: Iris Position |
| CAM_G ainPosilnq | 8x 09 04 4C FF | y0 50 00 00 0p 0q FF | pq: Gain Position |
| --- | --- | --- | --- |
| CAM BrightPosilnq | 8x 09 04 4D FF | y0 50 00 00 0p 0q FF | pq: Bright Position |
| CAM_ExpCompModeI nq | 8x 09 04 3E FF | y0 50 02 FF | On |
| y0 50 03 FF | OJf | ||
| CAM_ExpCompPosIn q | 8x 09 04 4E FF | y0 50 00 00 0p 0q FF | pq: ExpComp Position |
| CAM_Aperturelnq | 8x 09 04 42 FF | y0 50 00 00 0p 0q FF | pq: Aperture Gain |
| CAM Memorylnq | 8x 09 04 3F FF | y0 50pp FF | pp: Memory number last operated. |
| SYS_MenuModeInq | 8x 09 06 06 FF | y0 50 02 FF | On |
| y0 50 03 FF | OJf | ||
| CAM_LR_Revers elnq | 8x 09 04 61 FF | y0 50 02 FF | On |
| y0 50 03 FF | OJf | ||
| CAM PictureFliplnq | 8x 09 04 66 FF | y0 50 02 FF | On |
| y0 50 03 FF | OJf | ||
| CAM IDInq | 8x 09 04 22 FF | y0 50 0p 0q 0r 0s FF | pqrs: Camera ID |
| CAM Versionlnq | 8x 09 00 02 FF | y0 50 ab cd mn pq rs tu vw FF | |
| IR Transfer | 8x 09 06 1A FF | y0 50 02 FF | On |
| y0 50 03 FF | p | ||
| Pan-tiltMaxSpeedlnq | 8x 09 06 11 FF | y0 50 ww zz FF | ww: PanMaxSpeed zz: Tilt |
Max Speed
Pan-tiltPoslnq| 8x 09 06 12 FF| W soowowowow OzOzOz0zFF| wwww: PanPosition zzzz: Tilt Position
Note: r xR means the camera address ;r yR =r x + 8R .
VISCA PAN TILT ABSOLUTE POSITION VALUE
| Pan Angle | VISCA Value | Tilt Angle | VISCA Value |
|---|---|---|---|
| -170 | 0xF670 | -30 | 0xFE50 |
| -135 | 0xF868 | 0 | 0x0000 |
| 90 | OxFAFO | 30 | 0x01B0 |
-45
| 0xFD78
| 60| 0x0360
0| 0x0000| 90| 0x510
45| 0x0288| |
90| 0x0510| |
135| 0x0798| |
170| 0x0990| |
VISCA PAN TILT SPEED VALUE
| Pan(degree/second) | ALUE Pan Angle V | tilt(degree/second) | VISCA Value |
|---|---|---|---|
| 0 | 0.3 | 0 | 0.3 |
| 1 | 1 | 1 | 1 |
| 2 | 1.5 | 2 | 1.5 |
| 3 | 2.2 | 3 | 2.2 |
| 4 | 2.4 | 4 | 3.6 |
| 5 | 2.6 | 5 | 4.7 |
| 6 | 2.8 | 6 | 6 |
| 7 | 3.0 | 7 | 8 |
| 8 | 3.2 | 8 | 10 |
| 9 | 3.4 | 9 | 12 |
| 10 | 3.8 | 10 | 15 |
| 11 | 4.5 | 11 | 18 |
| 12 | 6 | 12 | 23 |
| 13 | 9 | 13 | 30 |
| 14 | 15 | 14 | 39 |
| --- | --- | --- | --- |
| 15 | 19 | 15 | 48 |
| 16 | 25 | 16 | 59 |
| 17 | 32 | 27 | 69 |
| 18 | 38 | 18 | 80 |
| 19 | 45 | ||
| 20 | 58 | ||
| 21 | 75 | ||
| 22 | 88 | ||
| 23 | 105 | ||
| 24 | 120 |
Shutter
speed| | 60/30mode| 50/25mode| Iris| |
---|---|---|---|---|---|---
21| 1/10000| 1/10000| 0| close
20| 1/6000| 1/6000| 1| F14
19| 1/4000| 1/3500| 2| F11
18| 1/3000| 1/2500| 3| F0,10.
17| 1/2000| 1/1750| 4| F8
16| 1/1500| 1/1250| 5| F0,7.
15| 1/1000| 1/1000| 6| F0,6.
14| 1/725| 1/600| 7| F0,5.
13| 1/500| 1/425| 8| F4
12| 1/350| 1/300| 9| F0,3.
11| 1/250| 1/215| 10| F0,3.
10| 1/180| 1/150| 11| F0,2.
9| 1/125| 1/120| 12| F2
8| 1/100| 1/100| 13| F0,2.
7| 1/90| 1/75| |
6| 1/60| 1/50| |
5| 1/30| 1/25| |
4| 1/15| 1/12| |
3| 1/8| 1/6| | |
2| 1/4| 1/3| | |
1| 1/2| 1/2| | |
0| 1/1| 1/1| | |
Gain| 0| 0dB| | Gain| 8| 16dB
1| 2dB| | 9| 18dB
2| 4dB| | 10| 20dB
3| EidB| | 11| 22dB
4| 8dB| | 12| 24dB
5| 10dB| | 13| 26dB
6| 12dB| | 14| 28dB
7| 14dB| | 15| 30c2
PELCO-D PROTOCOL COMMAND LIST
Function| Byte1| Byte2| Byte 3| Byte 4| Bytes|
Byte6| Byte 7
---|---|---|---|---|---|---|---
Up| 0xFF| Address| 0x00| 0x08| Pan Speed| Tilt Speed| SUM
Down| 0xFF| Address| 0x00| 0x10| Pan Speed| Tilt Speed| SUM
Left| 0xFF| Address| 0x00| 0x04| Pan Speed| Tilt Speed| SUM
Right| 0xFF| Address| 0x00| 0x02| Pan Speed| Tilt Speed| SUM
Upleft| 0xFF| Address| 0x00| 0x0C| Pan Speed| Tilt Speed| SUM
Upright| 0xFF| Address| 0x00| 0x0A| Pan Speed| Tilt Speed| SUM
DownLeft| 0xFF| Address| 0x00| 0x14| Pan Speed| Tilt Speed| SUM
DownRight| 0xFF| Address| 0x00| 0x12| Pan Speed| Tilt Speed| SUM
Zoom In| 0xFF| Address| 0x00| 0x20| 0x00| 0x00| SUM
Zoom Out| 0xFF| Address| 0x00| 0x40| 0x00| 0x00| SUM
Focus Far| 0xFF| Address| 0x00| 0x80| 0x00| 0x00| SUM
Focus Near| 0xFF| Address| 0x01| 0x00| 0x00| 0x00| SUM
Set Preset| 0xFF| Address| 0x00| 0x03| 0x00| Preset ID| SUM
Clear Preset| 0xFF| Address| 0x00| 0x05| 0x00| Preset ID| SUM
Call Preset| 0xFF| Address| 0x00| 0x07| 0x00| Preset ID| SUM
Query Pan Position| 0xFF| Address| 0x00| 0x51| 0x00| 0x00| SUM
Query Pan Position Response| 0xFF| Address| 0x00| 0x59| Value High Byte| Value
Low Byte| SUM
Query Tilt Position| 0xFF| Address| 0x00| 0x53| Ox00| Ox00| SUM
Query Tilt Position Response| 0xFF| Address| 0x00| 0x5B| Value High Byte|
Value Low Byte| SUM
Query Zoom Position| 0xFF| Address| 0x00| 0x55| 0x00| 0x00| SUM
Query Zoom Position Response| 0xFF| Address| 0x00| 0xSD| Value High Byte|
Value Low Byte| SUM
PELCO-P PROTOCOL COMMAND LIST
Function| Byte1| Byte2| !yle| Byte| Byte
Bytes| | Byte 7| Byte 8
---|---|---|---|---|---|---|---|---
Up| 0xA0| Address| 0x00| 0x08| Pan Speed| Tilt Speed| 0xAF| XOR
Down| 0xA0| Address| 0x00| 0x10| Pan Speed| Tilt Speed| 0xAF| XOR
Left| 0xA0| Address| 0x00| 0x04| Pan Speed| Tilt Speed| 0xAF| XOR
Right| 0xA0| Address| 0x00| 0x02| Pan Speed| Tilt Speed| 0xAF| XOR
Upleft| 0xA0| Address| 0x00| 0x0C| Pan Speed| Tilt Speed| 0xAF| XOR
Upright| 0xA0| Address| 0x00| 0x0A| Pan Speed| Tilt Speed| 0xAF| XOR
DownLeft| 0xA0| Address| 0x00| 0x14| Pan Speed| Tilt Speed| 0xAF| XOR
DownRight| 0xA0| Address| 0x00| 0x12| Pan Speed| Tilt Speed| 0xAF| XOR
Zoom In| 0xA0| s| 0x00| A ddres
0x20| 0x00| 0x00| 0xAF| XOR
Zoom Out| 0xA0| Address| 0x00| 0x40| 0x00| 0x00| 0xAF| XOR
Focus Far| 0xA0| Address| 0x00| 0x80| 0x00| 0x00| 0xAF| XOR
Focus Near| 0xA0| Address| 0x01| 0x00| 0x00| 0x00| 0xAF| XOR
Set Preset| 0KA°| Address| 0x00| 0x03| Ox00| Preset ID| 0xAF| XOR
Clear Preset| 0xA0| Address| 0x00| 0x05| 0x00| Preset ID| 0xAF| XOR
Call Preset| 0xA0| Addres s| 0x00| 0x07| 0x00| Preset ID| 0xAF| XOR
Query Pan Position| 0xA0| Addres s| 0x00| 0x51| 0x00| 0x00| 0xAF| XOR
Qouseitryion Pan P
Response| 0xA0| Address
Byte| 0x00| 0x59| Value High| Value Low Byte| 0xAF| XOR
Query TO Position| 0KA°| Address| 0x00| 0x53| Ox00| 0x00| 0xAF| XOR
Query Tilt Position Response| 0xA0| Address
Byte| 0x00| 0x58| Value
High| Value yte
Low B| 0xAF| XOR
Query Zoom Position| 0xA0| Address| 0x00| 0x55| 0x00| 0x00| 0xAF| XOR
OSD MENU
-
Under working mode, press the menu button on the IR remote, to enter the OSD menu; press the menu button again to exit and save modified parameters.
-
Use the navigate button to select the main menu. As above picture, once been selected, the main menu will change to grey color background, and the right side will show all parameter under this sub menu:
-
In the second grade menu, press the up/down navigate button to select the sub menu, use left/right navigate button to set the parameter;
-
Select the last option return and press the right navigate button to get back to previous menu;
-
Press OSD button again to exit the menu.
CAMERA
SET| LANGUAGE| Chinese/English
---|---|---
PROTOCOL| VISCAPELCO-P/PELCO-D
ADDRESS| 1-7
BAUD RATE| 2400.9600,115200
PARITY BIT| NONE
RETURN| Back to the main menu
FOCUS| FOCUS MODE| AUTO/MANUAUL/PUSH
---|---|---
SENSITIVITY| LOW/MID/HIGH
FOCUS LIMIT| 1.5M/2M/3M/6M/10M
D_ZOOM| OFF/ON
ZOOM SPEED| 0-7
LENS INIT| OFF/5K/10K/15K120K/EXE
DIS ZOOM RATIO| OFF/ON
RETURN| Bath to the main menu
WB MODE| WB MODE| ATW/MANU/MANU2/SON/FLJAUTO/IDFUODFUPUSH
B_GAIN| 0-255 (Only Valid when WB MODE set to MENU)
R_GAIN| 0-255 (Only Valid when WB MODE set to MENU)
RETURN| Bath to the main menu
EXPOSURE| EXP MODE| AUTO/MANUAF5S/SHUT/BRL
---|---|---
SHUT TIME| Shutter time:1/1-115000 Only Valid when EXP MODE
set to MANU
IRIS| Iris value: 0-13 Only Valid when EXP MODE set to
MANU
AGC| Gain value: OdB-ISdB Only Valid when EXP MODE
set to MANU
BRIGHT| Brightness value: 0-27 Only Valid when EXP MODE
set to SRI
SLOW SHUT| OFF/ON
FLICK| OFF/50H7J60HZ
RETURN| Back to the main menu
PICTURE| BRIGHTNESS| 1-15
SHARPNESS| 0-15
| CONTRAST| 0-15
---|---|---
SATURATION| 0-14
MIRROR| image 180degree rotation left/right: OFF/ON
PIC FLIP| Image 180degree rotation up/dostet OFF/ON
FREEZE| OFF/ON
DEFOG| OFF/1-15
RETURN| Back to the main menu
IMAGE
ENHANCE| 2D NR| OFF/ONT
3D NR| OFF/AUTO/ 2-4
D_WDR| OFF/1-6
GAMMA| 0-4
BACKLIGHT| OFF/ON
HIGHLIGHT| OFF/ON
RETURN| Back to the main menu
MASK| MASK SWITCH| ON/OFF
---|---|---
COLOUR| WHITFJYELLOW/GFtAY/GREEWVIOLET/RED/
INDEX| 1-8
INDEX SWITCH| OFF/ON
ROW START| 0-1919
ROW END| 1-1920
LINE START| 0-1079
LINE END| 1-1079
RETURN| Back to the main menu
D/N MODE| D/N MODE| DAY/NIGHT/AUTO/EXT
DAY TO NIGHT| 15-126
NIGHT TO DAY| 5-190
| SWITCH DELAY| 1-60
---|---|---
GAIN LIMIT| 2-611
RETURN| Bad( to the main menu
CAMERA
INF.| IMAGE VER.| PC-V0.0.6 (changes without additional notices)
IMAGE DATE| 16.10.20 (changes without additional notices)
CONTROL VER.| UC V0.1.4 (changes without additional notices)
CONTROL DATE| 17.01.07 (changes without additional notices)
BAUDRATE| 9600
PARITY BIT| NONE
FRAME RATE| 1080P30
RETURN| Back to the main menu
UVC CONTROL
| Control Requests | Control Selector | |
|---|---|---|
| 1 | Brightness Control | PU_BRIGHTNESS_CONTROL |
| 2 | Contrast Control | PU_CONTRAST_CONTROL |
| 3 | Hue Control | PU_HUE_CONTROL |
| 4 | Saturation Control | PU_SATURATION_CONTROL |
| 5 | Sharpness Control | PU_SHARPNESS_CONTROL |
| 6 | Gamma Control | PU_GAMMA_CONTROL |
| 7 | White Balance Temperature Control | PU WHITE_BALANCE_TEMPERATURE_CONTI: OL |
| 8 | Gain Control | PU_GAIN_CONTROL |
| 9 | Power Line Frequency Control | PU_POWER_LINE_FREOUENCY CONTROL |
| 10 | Zoom (Absolute) Control | CT_ZOOM_ABSOLUTE_CONTROL |
| 11 | Zoom (Relative) Control | CT_ZOOM_RELATIVE_OONTROL |
| 12 | PanTilt (Absolute) Control | CT_PANTILTABSOLUTE_CONTROL |
| 13 | PanTilt (Relative) Control | CT PANTILT_RELATIVE_CONTROL |
Copyrighto Angekis Technology Co.,Ltd All Rights Reserved.
WEB
Documents / Resources
|
Angekis U2-10FHD3 Blade VS 4K PTZ
Camera
[pdf] User Manual
U2-10FHD3, Blade VS, 4K PTZ Camera, Blade VS 4K PTZ Camera, U2-10FHD3 Blade VS
4K PTZ Camera
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>