Angekis Saber Light FHD PTZ Camera User Manual
- June 5, 2024
- Angekis
Table of Contents
- SAFETY GUIDES
- ACCESSORIES
- QUICK START
- PRODUCT HIGHLIGHTS
- PRODUCT SPEC
- CAMERA INTERFACE
- CAMERA DIMENSION
- IR REMOTE CONTROLLER
- VISCA IN (RS232 PORT)
- VISCA PROTOCOL
- PELCO-D PROTOCOL
- PELCO-P PROTOCOL
- IR TRANSFER(IR PASS)
- UVC CONTROL
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Angekis Saber Light FHD PTZ Camera User Manual
SAFETY GUIDES
- Before operaon, please fully read and follow all instrucons in the manual. For your safety, always keep this manual with the camera.
- The camera power input range is 100-240VAC(50-60Hz),ensure the power supply input within this rate before powering on.
- The camera power voltage is 12VDC, rated currency is 2A. We suggest you use it with the original power supply adapter supplied by the factory.
- Please keep the power cable, video cable and control cable in a safe place. Protect all cables especially the connectors.
- Operaonal environment: 0 -50 , humidity less than 90%.To avoid any danger, do not put anything inside the camera, and keep away from the corrosive liquid.
- Avoid stress, vibraon and damp during transportaon, storage and installaon.
- Do not detect the camera housing and cover. For any service, please contact authorized technicians.
- Video cable and control cable should be individually shielded, and cannot be substuted with other cables. Do not direct the camera lens towards strong light, such as the sun or the intensive light.
- Use a dry and so cloth to clean the camera housing. Applied with neutral cleaning agent when there is need to clean. To avoid damage on the camera lens, never use strong or abrasive cleaning agents on the camera housing.
- Do not move the camera by holding the camera head. To avoid mechanical trouble, do not rotate the camera head by hand. NEVER MOVE THE CAMERA MANUALLY WHEN IT IS WORKING.
- Put the camera on fixed and smooth desk or plaorm, avoid leaned installaon.
- Power Supply Polarity (Drawing)
DO NOT use hands for catching; or moving the camera barrel, otherwise it may damage the camera mechanical structure
DO NOT use hands to quick rotate the camera barrel, otherwise it maydamage the camera mechanical structure, even break the motor driving.
ACCESSORIES
Check all bellow items when open the package:
- Camera: 1 PCS
- Power Adapter: 1 PCS
- Power Cable: 1 PCS
- RS232 Control Cable : 1 PCS
- USB3.0 Cable : 1 PCS
- Remote Controller : 1 PCS
- User Manual : 1 PCS
- Double-sided Adhesive : 1 PCS
QUICK START
-
Check all cable connecons before power on.
-
DIP Switch Seng(at the boom of the camera):
Dial Switch(ARM)
| SW-1| SW-2| Instruction
1| OFF| OFF| Updating mode
2| ON| OFF| Debugging mode
3| ON| ON| Working mode
Dial Switch(USB)
| SW-5| SW-6| Instruction
1| OFF| OFF| Updating mode
2| ON| OFF| Debugging mode
3| OFF| ON| Undefined
4| ON| ON| Undefined
PRODUCT HIGHLIGHTS
- 3 cables in 1 design: video, control & power and be transited via signal USB3.0 cable. (Noce: to achieve stable power supply via USB3.0 cable, we suggest only use the 3m USB3.0 cable supplied by the factory, and the PC’s USB 3.0 port can supply more than 5V 1000mA power; We suggest you connect to the power adapter(supplied by the factory) if the camera is connecng to a USB2.0 port or USB 3.0 extender cable)
- Smart and fashion design, ideal for cloud-based conferencing
- Adopts advanced DSP, 1/2.8 in 2.1MPimage sensor, and high quality 5X 90 degree FOV opcal lens,provides fluent and crystal image quality
- Fast switching between different video formats: less than 1 second
- 5X Opcal Zoom + 2X Digital Zoom
- Fast and accurate focus performance
- Easy firmware upgrade-(field-upgradable)
- USB 3.0 supper speed output, USB 2.0 compable
- Effecve RS232/485 serial control
- Up to 128 presets
- Compable with the majority of video conferencing soware (UVC protocol standard)
- With powerful funconal remote controller
- IR transfer/IR pass funcon:except receiving the camera remote controller signal, the camera can also receive other codes’ IR remote control signal, and pass these IR control signal to the codec’s IR receiver (via VISCA port)
- Mu-language OSD menu: English, Chinese
PRODUCT SPEC
Video Format
| ****
USB3.0
| 1080P60/50/30/25, 720P60/50/30/25,
1024×576@30,960×540@30,640×360@30,352×288@30
---|---|---
USB2.0| 1024×576@30,960×540@30,640×360@30,352×288@30
Video Port| USB3.0, USB2.0
Sensor| 1/2.8 inch high quality 2.1MP CMOS sensor
Lens| 3.1 ~15.5mm(5x), F2 ~2.8, Field of View: 85°(wide)-26.5°(tele)
Pan/tilt Rotation| Pan: ± 170° ; Tilt: -30° ~ +90°, support up-
side down installation
Pan/tilt Speed| Pan: 0.1°~120°/s ; Tilt: 0°~80°/s
Preset:| 10 via remote setting:; 128 via VISCA control; Preset ccuracy: 0.2°
Control Port| RS232, RS485 (Serial VISCA, Pelco-P/D), USB3.0(UVC1.5),
USB2.0(UVC1.1)
Minimum Lux| 0.01lux
White Balance| Auto/ Manual/Auto Tracking/OnePush/ Indoor/Outdoor/Sodium Lamp
/Flurescent Lamp
Focus| Auto / Manual
Iris| Auto / Manual
Shutter| Auto / Manual
WDR| Supported
BLC| Supported
2D Noise Reduction| Supported
3D Noise Reduction| Supported
Gamma Setting| Supported
Mirror Image| Supported
Anti Flicker| OFF/ 50Hz/60Hz
Input Voltage| 5V 1000Ma(USB3.0) / 12V DC 1A (Power adapter)
Dimension| 220mm×190mm×173mm
Net Weight| 1.25KG(2.8LBS)
CAMERA INTERFACE
- .Camera Lens
- Camera Base
- IR Receiver Panel
- Indicator Light
- Dial Switch
- Tripod Screw Hole
- Installaon Hole
- Power Indicator light(red)
- 12V DC Power Input
- RS232 (VISCA IN) Port
- USB 3.0 Port
CAMERA DIMENSION
IR REMOTE CONTROLLER
VISCA IN (RS232 PORT)
No. | Function |
---|---|
1 | DTR |
2 | DSR |
3 | TXD |
4 | GND |
5 | RXD |
6 | A |
7 | IR OUT |
8 | B |
Camera VISCA IN | Windows DB-9 |
--- | --- |
1 | DTR |
2 | DSR |
3 | TXD |
4 | GND |
5 | RXD |
6 | A(+) |
7 | IR OUT |
8 | B(-) |
Camera VISCA IN | RS485 |
--- | --- |
1 | DTR |
2 | DSR |
3 | TXD |
4 | GND |
5 | RXD |
6 | A(+) |
7 | IR OUT |
8 | B(-) |
SERIAL PORT CONFIGURATION:
Parameter | Value | Parameter | Value |
---|---|---|---|
Baud rate | 2400/4800/9600/115200 | Stop Bit | 1 bit |
Start Bit | 1 bit | Verify Bit | None |
Date Bit | 8 bit |
VISCA PROTOCOL
Part1 Camera Return Command
Ack/Completion Message
| Command Packet| Note
ACK| z0 41 FF| Returned when the command is accepted.
Completion| z0 51 FF| Returned when the command has been executed.
z = camera adderss+8
Error Messages
| Command
Packet
| Note
Syntax Error| z0 60 02 FF| Returned when the command format is different or
when a command with illegal command parameters is accepted
Command Not Executable|
z0 61 41 FF
| Returned when a command cannot be executed due to current conditions. For example, when commands controlling the focus manually are received
during auto focus.
Part 2 Camera Control Command
Command type | function | Command packet | Note |
---|---|---|---|
AddressSet | Broadcast | 88 30 01 FF | Address setting |
IF_Clear | Broadcast | 88 01 00 01 FF | I/F Clear |
CAM_Power | On | 8x 01 04 00 02 FF | Power ON/OFF |
Off | 8x 01 04 00 03 FF |
CAM_Zoom
| Stop| 8x 01 04 07 00 FF|
Tele(Standard)| 8x 01 04 07 02 FF
Wide(Standard)| 8x 01 04 07 03 FF
Tele(Variable)| 8x 01 04 07 2p FF| p = 0(low)~7(high)
Wide(Variable)| 8x 01 04 07 3p FF
Direct| 8x 01 04 47 0p 0q 0r 0s FF| pqrs: Zoom Position (0(wide)
~0x4000(tele))
CAM_Focus
| Stop| 8x 01 04 08 00 FF|
Far(Standard)| 8x 01 04 08 02 FF
Near(Standard)| 8x 01 04 08 03 FF
Direct| 8x 01 04 48 0p 0q 0r 0s FF| pqrs: Focus Position
One Push AF| 8x 01 04 18 01 FF|
CAM_ZoomFocus
| ****
Direct
| 8x 01 04 47 0p 0q 0r 0s 0t 0u 0v 0w FF| pqrs: Zoom Position (0(wide)~ 0x4000(tele))
tuvw: Focus Position
CAM_WB
| Auto| 8x 01 04 35 00 FF|
Indoor| 8x 01 04 35 01 FF|
Outdoor| 8x 01 04 35 02 FF|
OnePush| 8x 01 04 35 03 FF|
Command type| function| Command packet| Note
---|---|---|---
| ATW| 8x 01 04 35 04 FF|
Manual| 8x 01 04 35 05 FF|
Sodium lamp| 8x 01 04 35 08 FF|
fluorescent| 8x 01 04 35 09 FF|
CAM_RGain
| Reset| 8x 01 04 03 00 FF| ****
Manual Control of R Gain
Up| 8x 01 04 03 02 FF
Down| 8x 01 04 03 03 FF
Direct| 8x 01 04 43 00 00 0p 0q
FF
| pq: R Gain (0~0xFF)
CAM_Bgain
| Reset| 8x 01 04 04 00 FF| ****
Manual Control of B Gain
Up| 8x 01 04 04 02 FF
Down| 8x 01 04 04 03 FF
Direct| 8x 01 04 44 00 00 0p 0q
FF
| pq: B Gain (0-0xFF)
CAM_AE
| Full Auto| 81 01 04 39 00 FF| Automatic Exposure mode
Manual| 81 01 04 39 03 FF| Manual Control mode
Shutter Priority| 81 01 04 39 0A FF| Shutter Priority mode
Iris Priority| 81 01 04 39 0B FF| Iris Priority mode
Bright| 81 01 04 39 0D FF| Bright Mode (Manual control)
CAM_Shutter
| Reset| 8x 01 04 0A 00 FF| ****
Shutter Setting
Up| 8x 01 04 0A 02 FF
Down| 8x 01 04 0A 03 FF
Direct| 8x 01 04 4A 00 00 0p 0q
FF
| pq: Shutter Position (0~0x15)
CAM_Iris
| Reset| 8x 01 04 0B 00 FF| ****
Iris Setting(0~0xD)
Up| 8x 01 04 0B 02 FF
Down| 8x 01 04 0B 03 FF
Direct| 8x 01 04 4B 00 00 0p 0q
FF
| pq: Iris Position (0~ 0x11)
CAM_Gain
| Reset| 8x 01 04 0C 00 FF| ****
Gain Setting (0~0x0F)
Up| 8x 01 04 0C 02 FF
Down| 8x 01 04 0C 03 FF
Command type| function| Command packet| Note
---|---|---|---
| Direct| 8x 01 04 0C 00 00 0p 0q
FF
| pq: Gain Positon (0~0x0E)
CAM_Bright
| Reset| 8x 01 04 0D 00 FF| ****
Bright Setting
Up| 8x 01 04 0D 02 FF
Down| 8x 01 04 0D 03 FF
Direct| 8x 01 04 4D 00 00 0p 0q
FF
| pq: Bright l Positon (0~0x1B)
CAM_WDR
| On| 8x 01 04 3D 02 FF| ****
Exposure Compensation ON/OFF
Off| 8x 01 04 3D 03 FF
Direct| 8x 01 04 2D pq FF| pq: ExpComp Position (0~0x6)
CAM_BackLight
| On| 8x 01 04 33 02 FF| BackLight On
Off| 8x 01 04 33 03 FF| BackLight Off
CAM_Sharpness
| Reset| 8x 01 04 02 00 FF| ****
Aperture Control
Up| 8x 01 04 02 02 FF
Down| 8x 01 04 02 03 FF
Direct| 8x 01 04 42 00 00 0p 0q
FF
| pq: Aperture Gain (0~0x0F)
CAM_Preset
| Reset| 8x 01 04 3F 00 0p FF| ****
P: Press Number(=0 to 127) Corresponds to 0 to 9 on the Remote Commander
Set| 8x 01 04 3F 01 0p FF
Recall| 8x 01 04 3F 02 0p FF
CAM_LR_Reverse
| On| 8x 01 04 61 02 FF| ****
Image Flip Horizontal ON/OFF
Off| 8x 01 04 61 03 FF
CAM_PictureFlip
| On| 8x 01 04 66 02 FF| ****
Image Flip Vertical ON/OFF
Off| 8x 01 04 66 03 FF
CAM_MountMode
| Up| 8x 01 04 A4 02 FF|
Down| 8x 01 04 A4 03 FF
CAM_ColorGain| Direct| 8x 01 04 49 00 00 00 0p
FF
| (0~0x0E)
CAM_Saturation| Direct| 8x 01 04 A1 00 00 0p 0q
FF
| pq :saturation level 0x00~0xff
CAM_2D
Noise Reduction
| Direct| 8x 01 04 53 0p FF| (0~0x05)
CAM_3D
Noise Reduction
| Direct| 8x 01 04 54 0p FF| (0~0x03)
CAM_NewBright| Direct| 8x 01 04 A4 00 00 0p 0q
FF
| (0~0x0F)
Command type| function| Command packet| Note
---|---|---|---
CAM_Contrast| Direct| 8x 01 04 A2 00 00 0p 0q
FF
| (0~0x0F)
CAM_Gamma| Direct| 81 01 04 5B 0p FF| (0~0x04)
FLICK
| 50HZ| 81 01 04 23 01 FF|
60HZ| 81 01 04 23 02 FF|
OFF| 81 01 04 23 00 FF|
SYS_Menu
| Menu On| 8x 01 06 06 02 FF| Turn on the menu
Menu Off| 8x 01 06 06 03 FF| Turn off the menu
Menu Back| 8x 01 06 06 10 FF| Menu step back
Menu Ok| 8x 01 7E 01 02 00 01 FF| Menu ok
IR_Transfer
| Transfer On| 8x 01 06 1A 02 FF| Receive IR(remote commander)CODE from VISCA
communication ON/OFF
Transfer Off| 8x 01 06 1A 03 FF
IR_Receive
| On| 8x 01 06 08 02 FF| ****
IR(remote commander)receive ON/OFF
Off| 8x 01 06 08 03 FF
On/Off| 8x 01 06 08 10 FF
IR_ReceiveReturn
| On| 8x 01 7D 01 03 00 00 FF| IR(Remote commander) receive message via the
VISCA communication ON/OFF
Off| 8x 01 7D 01 13 00 00 FF
Pan_tiltDrive
| Up| 8x 01 06 01 VV WW 03 01
FF
| ****
VV: Pan speed 0x01 (low speed) to 0x18 (high speed)
WW: Tilt speed 0x01 (low speed) to 0x14 (high speed) YYYY: Pan Position(TBD) ZZZZ: Tilt Position(TBD)
Down| 8x 01 06 01 VV WW 03 02
FF
Left| 8x 01 06 01 VV WW 01 03
FF
Right| 8x 01 06 01 VV WW 02 03
FF
Upleft| 8x 01 06 01 VV WW 01 01
FF
Upright| 8x 01 06 01 VV WW 02 01
FF
DownLeft| 8x 01 06 01 VV WW 01 02
FF
DownRight| 8x 01 06 01 VV WW 02 02
FF
Stop| 8x 01 06 01 VV WW 03 03
FF
AbsolutePosition| 8x 01 06 02 VV WW
0Y 0Y 0Y 0Y 0Z 0Z 0Z 0Z FF
RelativePosition| 8x 01 06 03 VV WW
0Y 0Y 0Y 0Y 0Z 0Z 0Z 0Z FF
Home| 8x 01 06 04 FF
Command type| function| Command packet| Note
---|---|---|---
| Reset| 8x 01 06 05 FF|
Pan-tiltLimitSet
| Set| 8x 01 06 07 00 0W
0Y 0Y 0Y 0Y 0Z 0Z 0Z 0Z FF
| W:1 UpRight 0:DownLeft YYYY: Pan Limit Position(TBD) ZZZZ: Tilt Limit
Position(TBD)
Clear| 8x 01 06 07 01 0W
07 0F 0F 0F 07 0F 0F 0F FF
Part 3 Inquiry Command
Command type | command | return | note |
---|---|---|---|
CAM_PowerInq | 8x 09 04 00 FF | y0 50 02 FF | On |
y0 50 03 FF | Off(Standby) | ||
CAM_ZoomPosInq | 8x 09 04 47 FF | y0 50 0p 0q 0r 0s FF | pqrs: Zoom Position |
CAM_FocusModeInq | 8x 09 04 38 FF | y0 50 02 FF | Auto Focus |
y0 50 03 FF | Manual Focus | ||
CAM_FocusPosInq | 8x 09 04 48 FF | y0 50 0p 0q 0r 0s FF | pqrs: Focus Position |
CAM_WBModeInq
| ****
8x 09 04 35 FF
| y0 50 00 FF| Auto
y0 50 01 FF| Indoor mode
y0 50 02 FF| Outdoor mode
y0 50 03 FF| OnePush mode
y0 50 04 FF| ATW
y0 50 05 FF| Manual
CAM_RGainInq| 8x 09 04 43 FF| y0 50 00 00 0p 0q FF| pq: R Gain
CAM_BGainInq| 8x 09 04 44 FF| y0 50 00 00 0p 0q FF| pq: B Gain
CAM_AEModeInq
| ****
8x 09 04 39 FF
| y0 50 00 FF| Full Auto
y0 50 03 FF| Manual
y0 50 0A FF| Shutter priority
y0 50 0B FF| Iris priority
y0 50 0D FF| Bright
CAM_ShutterPosInq| 8x 09 04 4A FF| y0 50 00 00 0p 0q FF| pq: Shutter Position
CAM_IrisPosInq| 8x 09 04 4B FF| y0 50 00 00 0p 0q FF| pq: Iris Position
CAMGainPosiInq| 8x 09 04 4C FF| y0 50 00 00 0p 0q FF| pq: Gain Position
CAM BrightPosiInq| 8x 09 04 4D FF| y0 50 00 00 0p 0q FF| pq: Bright
Position
CAM_ExpCompModeInq| 8x 09 04 3E FF| y0 50 02 FF| On
y0 50 03 FF| Off
CAM_ExpCompPosInq| 8x 09 04 4E FF| y0 50 00 00 0p 0q FF| pq: ExpComp Position
CAM_ApertureInq| 8x 09 04 42 FF| y0 50 00 00 0p 0q FF| pq: Aperture Gain
CAM_MemoryInq| 8x 09 04 3F FF| y0 50 pp FF| pp: Memory number last operated.
SYS_MenuModeInq| 8x 09 06 06 FF| y0 50 02 FF| On
y0 50 03 FF| Off
CAM_LR_ReverseInq| 8x 09 04 61 FF| y0 50 02 FF| On
y0 50 03 FF| Off
CAM_PictureFlipInq| 8x 09 04 66 FF| y0 50 02 FF| On
y0 50 03 FF| Off
IR_Transfer| 8x 09 06 1A FF| y0 50 02 FF| On
---|---|---|---
y0 50 03 FF| Off
IR_Receive| 8x 09 06 08 FF| y0 50 02 FF| On
y0 50 03 FF| Off
IR_ReceiveReturn
| | y0 07 7D 01 04 00 FF| Power ON/OFF
y0 07 7D 01 04 07 FF| Zoom tele/wide
y0 07 7D 01 04 38 FF| AF On/Off
y0 07 7D 01 04 33 FF| CAM_Backlight
y0 07 7D 01 04 3F FF| CAM_Memory
y0 07 7D 01 06 01 FF| Pan_tiltDrive
Pan-tiltPosInq| 8x 09 06 12 FF| y0 50 0w 0w 0w 0w
0z 0z 0z 0z FF
| wwww: PanPosition zzzz: Tilt Position
Note: 【x】 means the camera address ;【y】=【x+8】
VISCA PAN TILT ABSOLUTE POSITION VALUE
Pan Angle | VISCA Value | Tilt Angle | VISCA Value |
---|---|---|---|
-170 | 0xF670 | -30 | 0xFE50 |
-135 | 0xF868 | 0 | 0x0000 |
-90 | 0xFAF0 | 30 | 0x01B0 |
-45 | 0xFD78 | 60 | 0x0360 |
0 | 0x0000 | 90 | 0x510 |
45 | 0x0288 | ||
90 | 0x0510 | ||
135 | 0x0798 | ||
170 | 0x0990 |
EXPOSURE DATA SHEET
Shutter speed
| | 60/30mode| 50/25mode| ****
Iris
| |
---|---|---|---|---|---|---
15| 1/10000| 1/10000| 0| close
14| 1/6000| 1/6000| 1| F14
13| 1/4000| 1/3500| 2| F11
12| 1/3000| 1/2500| 3| F9.6
11| 1/2000| 1/1750| 4| F8
10| 1/1500| 1/1250| 5| F6.8
0F| 1/1000| 1/1000| 6| F5.6
0E| 1/725| 1/600| 7| F4.8
0D| 1/500| 1/425| 8| F4
0C| 1/350| 1/300| 9| F3.4
0B| 1/250| 1/215| 10| F2.8
0A| 1/180| 1/150| 11| F2.4
09| 1/125| 1/120| 12| F2
08| 1/100| 1/100| 13| F1.8
07| 1/90| 1/75| | |
06| 1/60| 1/50| | |
05| 1/30| 1/25| | |
| 04| 1/15| 1/12| | |
---|---|---|---|---|---|---
03| 1/8| 1/6| | |
02| 1/4| 1/3| | |
01| 1/2| 1/2| | |
00| 1/1| 1/1| | |
Gain
| 0| 0dB| | ****
Gain
| 8| 16dB
1| 2dB| | 9| 18dB
2| 4dB| | 10| 20dB
3| 6dB| | 11| 22dB
4| 8dB| | 12| 24dB
5| 10dB| | 13| 26dB
6| 12dB| | 14| 28dB
7| 14dB| | 15| 30dB
Bright
| | IRIS| GAIN
---|---|---|---
1B| F1.8| +28dB
1A| F1.8| +26dB
19| F1.8| +24dB
18| F1.8| +22dB
17| F1.8| +20dB
16| F1.8| +18dB
15| F1.8| +16dB
14| F1.8| +14dB
13| F1.8| +12dB
12| F1.8| +10dB
11| F1.8| +8dB
10| F1.8| +6dB
0F| F1.8| +4dB
0E| F1.8| +2dB
0D| F1.8| 0dB
0C| F2| 0dB
0B| F2.4| 0dB
0A| F2.8| 0dB
09| F3.4| 0dB
08| F4| 0dB
07| F4.8| 0dB
06| F5.6| 0dB
05| F6.8| 0dB
04| F8| 0dB
03| F9.6| 0dB
02| F11| 0dB
01| F14| 0dB
00| CLOSE| 0dB
PELCO-D PROTOCOL
Function| Byte1| Byte2| Byte3| Byte4| Byte5|
Byte6| Byte7
---|---|---|---|---|---|---|---
Up| 0xFF| Address| 0x00| 0x08| Pan Speed| Tilt Speed| SUM
Down| 0xFF| Address| 0x00| 0x10| Pan Speed| Tilt Speed| SUM
Left| 0xFF| Address| 0x00| 0x04| Pan Speed| Tilt Speed| SUM
Right| 0xFF| Address| 0x00| 0x02| Pan Speed| Tilt Speed| SUM
Upleft| 0xFF| Address| 0x00| 0x0C| Pan Speed| Tilt Speed| SUM
Upright| 0xFF| Address| 0x00| 0x0A| Pan Speed| Tilt Speed| SUM
DownLeft| 0xFF| Address| 0x00| 0x14| Pan Speed| Tilt Speed| SUM
DownRight| 0xFF| Address| 0x00| 0x12| Pan Speed| Tilt Speed| SUM
Zoom In| 0xFF| Address| 0x00| 0x20| 0x00| 0x00| SUM
Zoom Out| 0xFF| Address| 0x00| 0x40| 0x00| 0x00| SUM
Focus Far| 0xFF| Address| 0x00| 0x80| 0x00| 0x00| SUM
Focus Near| 0xFF| Address| 0x01| 0x00| 0x00| 0x00| SUM
Set Preset| 0xFF| Address| 0x00| 0x03| 0x00| Preset ID| SUM
Clear Preset| 0xFF| Address| 0x00| 0x05| 0x00| Preset ID| SUM
Call Preset| 0xFF| Address| 0x00| 0x07| 0x00| Preset ID| SUM
Query Pan Position| 0xFF| Address| 0x00| 0x51| 0x00| 0x00| SUM
Query Pan Position
Response
| 0xFF| Address| 0x00| 0x59| Value High
Byte
| Value Low
Byte
| SUM
Query Tilt Position| 0xFF| Address| 0x00| 0x53| 0x00| 0x00| SUM
Query Tilt Position Response| 0xFF| Address| 0x00| 0x5B| Value High Byte|
Value Low Byte| SUM
Query Zoom Position| 0xFF| Address| 0x00| 0x55| 0x00| 0x00| SUM
Query Zoom Position
Response
| 0xFF| Address| 0x00| 0x5D| Value High
Byte
| Value Low
Byte
| SUM
PELCO-P PROTOCOL
Function | Byte1 | Byte2 | Byte3 | Byte4 | Byte5 | Byte6 | Byte7 | Byte8 |
---|---|---|---|---|---|---|---|---|
Up | 0xA0 | Address | 0x00 | 0x08 | Pan Speed | Tilt Speed | 0xAF | XOR |
Down | 0xA0 | Address | 0x00 | 0x10 | Pan Speed | Tilt Speed | 0xAF | XOR |
Left | 0xA0 | Address | 0x00 | 0x04 | Pan Speed | Tilt Speed | 0xAF | XOR |
Right | 0xA0 | Address | 0x00 | 0x02 | Pan Speed | Tilt Speed | 0xAF | XOR |
Upleft | 0xA0 | Address | 0x00 | 0x0C | Pan Speed | Tilt Speed | 0xAF | XOR |
Upright | 0xA0 | Address | 0x00 | 0x0A | Pan Speed | Tilt Speed | 0xAF | XOR |
DownLeft | 0xA0 | Address | 0x00 | 0x14 | Pan Speed | Tilt Speed | 0xAF | XOR |
DownRight | 0xA0 | Address | 0x00 | 0x12 | Pan Speed | Tilt Speed | 0xAF | XOR |
Zoom In | 0xA0 | Address | 0x00 | 0x20 | 0x00 | 0x00 | 0xAF | XOR |
Zoom Out | 0xA0 | Address | 0x00 | 0x40 | 0x00 | 0x00 | 0xAF | XOR |
Focus Far | 0xA0 | Address | 0x00 | 0x80 | 0x00 | 0x00 | 0xAF | XOR |
Focus Near | 0xA0 | Address | 0x01 | 0x00 | 0x00 | 0x00 | 0xAF | XOR |
Set Preset | 0xA0 | Address | 0x00 | 0x03 | 0x00 | Preset ID | 0xAF | XOR |
Clear Preset | 0xA0 | Address | 0x00 | 0x05 | 0x00 | Preset ID | 0xAF | XOR |
Call Preset | 0xA0 | Address | 0x00 | 0x07 | 0x00 | Preset ID | 0xAF | XOR |
Query Pan Position | 0xA0 | Address | 0x00 | 0x51 | 0x00 | 0x00 | 0xAF | XOR |
Query Pan Position
Response
| 0xA0| Address| 0x00| 0x59| Value High
Byte
| Value Low
Byte
| 0xAF| XOR
Query Tilt Position| 0xA0| Address| 0x00| 0x53| 0x00| 0x00| 0xAF| XOR
Query Tilt Position Response| 0xA0| Address| 0x00| 0x5B| Value High Byte|
Value Low Byte| 0xAF| XOR
Query Zoom Position| 0xA0| Address| 0x00| 0x55| 0x00| 0x00| 0xAF| XOR
Query Zoom Position
Response
| 0xA0| Address| 0x00| 0x5D| Value High
Byte
| Value Low
Byte
| 0xAF| XOR
OSD MENU
-
Under working mode, press the menu buon on the IR remote controller, to enter the OSD menu:
-
Use the navigate buon to select the main menu. Once been selected, the main menu will change to blue background, and the right side will show all sub menu opons.
-
Press the right navigate buon to enter sub menu; use up and down navigate buon to select parameter.
-
Press the menu buon again to return to previous menu. Press it connuously to exit the OSD menu.
Before exing,will show up a window to remind whether need to save all sengs(use le and right buon to set) -
OSD Menu Seng List
SYSTEM
| LANGUAGE| Chinese、English| Default:English
---|---|---|---
PROTOCOL| VISCA、PELCO-P、PELCO-D| Default:VISCA
ADDRESS| VISCA:1~7 PELCO-P/D:1~255| Default:1
BAUD RATE| 2400、4800、9600、115200| Default:9600
RETURN| Return to Main menu|
FOCUS
| FOCUS MODE| AUTO/MANUAL/PUSH| Default:AUTO
---|---|---|---
FOCUS LIMIT| Focus Distance between camera and object:
1.5M/2M/3M/6M/10M
| Default:1.5M
DZOOM| DIGITAL ZOOM: ON/OFF| Default:OFF
RATIO DIS| Zoom Rate Display (include Digital Zoom):ON/OFF| Default:OFF
RETURN| RETURN to Main menu|
EXPOSURE
| EXP.MODE| AUTO、MANUAL、BRIGHT、SHUTTER、IRIS| Default:AUTO
SHUTTER
| Shutter speed:1/8~1/10000, only valid when EXP
MODE set to MANUAL or SHUTTER mode
| Default:1/100
IRIS| Iris Setting:CLOSE~F1.8, only valid when EXP MODE
set to MANUAL or SHUTTER mode
| Default:10
GAIN| Gain setting:0dB~28dB , only valid when the EXP
MODE set to MANUAL mode
| Default:0
BRIGHT| Brightness Setting: 0~15 Only valid when the EXP
MODE set to MANUAL mode
| Default:11
FLICK| Anti-Flicker setting:50HZ/60HZ/OFF| Default:50HZ
BACK LIGHT| ON/OFF| Default:OFF
GAMMA| Gamma Setting:0~4| Default:0
RETURN| Return to previous menu|
IMAGE
|
WB MODE
| White Balance Setting: ATW(Auto White Balance), MANU(Manual),MANU2(Manual2),SON.(Sodium Lamp),FL(Fluorescent Lamp), AUTO,IDR.(In
Door),ODR(Out Door), PUSH
|
Default:Auto
R GAIN
| Blue gain SETTING :0~255 , only valid when WB
MODE set to manual mode
|
Default:58
B GAIN| Blue gain SETTING :0~255 , only valid when WB
MODE set to manual mode
|
Default:52
DEFOG| Image Transparency Setting:OFF/ 1~15| Default:0
| RETURN| Return to Main Menu|
---|---|---|---
QUALITY
| 2D NR| 2D Noise Reduction: OFF/ON| Default:OFF
3D NR| 3D Noise Reduction: OFF/ON| Default:AUTO
SHARPNESS| Sharpness setting: OFF/0~15| Default:OFF
CONTRAST| Contrast setting: 0~15| Default:8
SATURATION| Color Saturation Setting: 0~15| Default:8
BRIGHT| Brightness setting: 0~15| Default:6
D_WDR| White Dynamic Rate: OFF/ 1~6| Default:On
RETURN| Return to previous menu|
CONTROL
| MIRROR| Image 180 degree rotation left/right: OFF/ON| Default:OFF
FLIP| Image 180 degree rotation up/down: OFF/ON| Default:OFF
D/N MODE| DAY/NIGHT| Default:OFF
GAIN LIMIT| Gain limit value setting| Default:128
RETURN| Back to main Menu|
FORMAT
| 1080P60| 720P60| 1024×576@30| Only for display current video format, can’t switch video format via
OSD.
1080P50| 720P50| 960×540@30
1080P30| 720P30| 640×360@30
1080P25| 720P25| 352×288@30
RESET
| CAM RESET| Reset camera parameter to default
PTZ RESET| Reset pan/tilt parameter to default
ALL RESET| Reset all parameter to default
RETURN| Return to main menu
INFO
| CONTROL VER| Camera control firmware version
CONTROL DA| Camera control firmware releasing date
FORMAT| Current video output format
BAUD RATE| Current RS2332 baud rate
RETURN| Return to the previous menu
IR TRANSFER(IR PASS)
- Currently the camera support NEC code format. For customized with other codes, pls contact us.
- Once the camera finish power configuraon, enable the IR transfer funcon via sending COM command.
- Get the targeted remote controller point to the camera IR receiver, press keys on the remote controller, then the camera will output the received IR code via VISCA IN port.
- IR Transfer output format: XX XX XX XX FF
XX XX XX XX : Remote Controller Code
FF: End Code
UVC CONTROL
- Only run the client soware aer the USB3.0 camera has completed self-configuraon (the IR indicator in blue color and will not flash); otherwise may cause black video issue.
- Make sure the USB3.0 camera is recognized by the PC Device Manager.
- Make sure the interval of video format switching more than 3 seconds, otherwise black video maybe caused.
- Make sure the interval of control command sending from the server (via USB) to the camera no less than 250ms.
- Support standard UVC interface.
UVC Property | Corresponded VISCA Command |
---|---|
PU_BRIGHTNESS_CONTROL | 8x 01 04 33 02 FF |
CY_FX_UVC_PU_BRIGHTNESS_CONTROL | 8x 01 04 A4 00 00 0p 0q FF |
CY_FX_UVC_PU_CONTRAST_CONTROL | 81 01 04 A2 00 00 0p 0q FF |
CY_FX_UVC_PU_SATURATION_CONTROL | 8x 01 04 A1 00 00 0p 0q FF |
CY_FX_UVC_PU_SHARPNESS_CONTROL | 8x 01 04 42 00 00 0p 0q FF |
CY_FX_UVC_PU_GMMA_CONTROL | 8x 01 04 5B 0p FF |
CY_FX_UVC_PU_WHITE_BALANCE_TEMPERATURE_CONTROL | 8x 01 04 35 0p FF |
CY_FX_UVC_PU_BACKLIGHT_COMPENSATION_CONTROL | 8x 01 04 33 0p FF |
CY_FX_UVC_PU_GAIN_CONTROL | 8x 01 04 49 00 00 0p 0q FF |
CY_FX_UVC_PU_POWER_LINE_FREQUENCYCONTROL | 8x 01 04 AA 0p FF |
PU_GAIN_CONTROL | 8x 01 04 49 0p 0q 0r 0s FF |
CT_ZOOM_ABSOLUTE_CONTROL | 8x 01 04 47 0p 0q 0r 0s FF |
--- | --- |
CT_PANTILT_ABSOLUTE_CONTROL | 8x 01 06 02 VV WW 0Y 0Y 0Y 0Y 0Z 0Z 0Z 0Z F |
CT_PANTILT_RELATIVE_CONTROL | 8x 01 06 01 pp qq rr ss FF |
CT_ZOOM_RELATIVE_CONTROL | 8x 01 04 07 pp FF |
Copyright® Angekis Technology Co., Ltd All Rights Reserved.
WEB