DOMO DO8132 Free Standing Fan Instruction Manual

DOMO DO8132 Free Standing Fan

SAFETY INSTRUCTIONS

This appliance may be used by children from the age of 8 and up, and also by persons with a physical or sensorly limitation, as well as mentally limited persons or persons
with a lack of experience and knowledge. But only on the
condition that these persons have received the necessary instructions on how to use this appliance in a safe way and know the dangers that can occur by using this appliance.
Children cannot be allowed to play with the appliance. Maintenance and cleaning of the appliance may not be done by children, unless they are older than 8 years old and are under supervision.
Keep the appliance out of reach of children younger than 8 years old.
This appliance is suitable to be used in a household environment and in similar surroundings such as:

• Kitchen for personnel of shops, offices or other similar professional surroundings
• Farms
• Hotel or motel rooms and other surroundings with a residential character
• Guest rooms or similar

Attention: This appliance cannot be used with an external timer or a separate remote control.

• Don’t touch the appliance with wet hands or feet.
• Don’t use the appliance barefoot.
• Do not insert or allow fingers or foreign objects to enter any ventilation or exhaust opening as it may cause an electric shock or fire or damage the heater.
• To prevent a possible fire, do not block air intakes or exhaust in any manner.
• Always place the appliance on a stable, flat, level surface when operating. Do not cover the power cord, do not place any objects on the power cord. Make sure the power cord can not be tripped over.
• Make sure the cord isn’t placed on a hot surface.
• Don’t pull the power cord or the appliance to remove the plug from the socket.
• Don’t expose the appliance to rain, sun, etc. can’t let children or unauthorised persons use the appliance without supervision.
• Don’t immerse the appliance in water.
• Don’t use the appliance near a bath, shower or swimming pool. This appliance is not intended for use in wet or damp locations.
• Before cleaning the appliance always unplug the appliance first or put the switches in the “off” position.
• When your appliance is damaged, switch it off and unplug the power cord. Don’t try to repair it yourself. Contact an electrician or the after sales service of the manufacturer, to make that original parts will be used.
• When you decide to never again use the appliance, we recommend to cut of the power cord completely, after you have removed the plug from the socket.
• Installation of the appliance must be done according to the specifications of the manufacturer. A wrong installation can lead to accidents with people, animals or damage to objects. The manufacturer cannot be held responsible for this.
• The appliance must always be used upright.
• The inlet grill of the appliance must always be left free.
• Make sure that the current is the same as mentioned on the rating label. When in doubt, let it be checked by an electrician.
• Don’t let the appliance operate when it is not necessary. Remove the plug from the socket when you don’t need the appliance.
• Don’t cover up the air inlet and air outlet grill.
• The power cord of this appliance cannot be replaced by the consumer. For the replacement of the cord you can only make an appeal on the after sales service of the manufacturer.
• Do not use the appliance outdoors.
• Do not allow children to use the appliance, unless a supervisor is present and a person who is responsible for their safety has clearly described how the appliance works.

HOW TO USE

To adjust the speed, move the speed control to the required position :

• 0 : to stop
• 1 : slow
• 2 : medium
• 3 : fast

To make the fan head oscillate, push in the knob on the motor housing. To stop the fan from oscillation, pull up on the knob.
To adjust vertical angle, tilt fan head up or down as desired.

ASSEMBLY

MONTEER THE ROUND FOOT TO THE TELESCOPIC TUBE:

• At the bottom side of the tube is a “L” shaped screw. Losen this screw.
• Place the tube in the foot and attache the tub with the “L” shaped screw.
• Place the motor unit on the telescopic tube. Remove the large black screw from the tube and the black screw from the motor unit.
• Place the motor on the tube, make sure the small groove, fits in the little hole on the tube. Now use the large black srew of the tube, to fix the motor unit to the tube. Now use the other black screw, to fully fix the motor unit. This last screw can also be used to tilt the fan.

ASSEMBLY THE FAN TO THE MOTOR UNIT

Remove the small screw at the bottom (1) from the engine part

• Take the rear grid (the one with a handle)
• Place the grid with the two pins behind on the grid at the two openings (2) on the engine part
• Carefully move the grid down
• Secure the grid back onto the engine part by the bot-tom screw (1)
• Push in firmly until the pins protrude through the holes.
• Secure the rear guard to the motor unit with the rear guard lock nut.
• Insert the fan blade onto the motor shaft. Be sure that the pin in the shaft is match with the slot on the fan blade. Press firmly until the fan blade stops. Secure the fan blade with the fan blade screw.
• Test the fan blade operation by rotating it with your hand. There should be no fric-tion with the rear guard lock nut. If the blade does not rotate freely, disassemble and repeat the procedure.
• Attach the front guard to the rear guard by positioning the hook.
• Join the front/rear guards by pressing firmly.
• Secure the two guards by the fixing screw.

CLEANING

Use a soft tissue or cloth to clean. In case dirt or grime does not come off easily, use soapy water. Do not use benzine thinner or other solvents.

References

• www.ELEKTROKOLA.cz - Crussis, Ghost, Kellys, Leader Fox, Pells, Specialized - doprava zdarma

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>