VISION TECH SHOP DLP-300 Label Printing Scale Pole Display Instruction Manual

VISION TECH SHOP DLP-300 Label Printing Scale Pole Display

Entering a PLU Using Discount Rate (S11 Mode)

• Note: To use the default End Time simply press the Print/ key again.
• Press the SAVE key
• Press the FEED/ESC key.

Note: After a discount has expired it must be manually deleted. Please refer to the Delete Discount procedure for the proper method to delete a discount.

MMX New Price (S12 Mode)

Deleting a Discount
Follow the steps below to delete a Discount.

1. From the Discount Number Screen
2. Enter the Discount Number to delete
3. Ex.) Select Discount Number 1 to be deleted by pressing the number one key
4. Press the VOID key
5. Press the FEED/ESC key

Note: Each Discount programmed can be deleted individually using the method above.

MMX –New Price (S12 Mode)
The MMX mode provides the ability to apply discounts to programmed PLU’s. The S12 Mode allows you to discount PLU’s based on a new Unit Price. This type of discount may also be programmed to be active based on a date and time schedule.

Entering a PLU Discount using New Price

1. Start at the normal weigh mode screen

2. Press the Mode Key twice

3. Press the number 1 key then the number 2 key then press the X key
   Note: This has the same results as pressing the X key eleven times.

4. Press the Print/* key

5. Enter the Discount Number
   Ex.) Enter Discount Number 5 by pressing the number five key.

6. Press the Print/* key

7. Enter the Discounted PLU Number Ex.) Select PLU Number 18 for Discounting by pressing the number one key then the number eight key.
   Press the Print/* key

8. Enter the New Price Discount Ex.)Use $7.99 as the New Price Discount by pressing the number seven key then the number nine key twice. Press the Print/ key
   Note: The current date will be displayed. If you wish to use the current date you can just press the Print/ key again.

9. Enter the Discount Start Date Ex.) Enter a Start Date of December 20, 2016 (122016) using the number keys.
   Press the Print/ key
   Note: The current date will be displayed. If you wish to use the current date you can just press the Print/ key again.

10. Enter the Discount End DateEx.) Enter an end Date of December 27, 2016 (122716) using the number keys.
    Press the Print/* key

11. Enter the Discount Start Time on each day in the date range
    Ex.) Use the Start Time of 9:00AM (09:00:00)
    Note: To use the default Start Time simply press the Print/ key again.
    Press the Print/ key

12. Enter the Discount End Time on each day in the date range
    Ex.) Use the End Time of 6:00PM
    Note: To use the default End Time simply press the Print/ key again.
    Press the Print/ key
    Press the SAVE key Note: After a discount has expired it must be manually deleted. Please refer to the Delete Discount procedure for the proper method to delete a discount.

Deleting a Discount

Follow the steps below to delete a Discount.

1. From the Discount Number Screen
2. Enter the Discount Number to delete
   Ex.) Select Discount Number 5 to be deleted by pressing the number five key
   Press the VOID key
   Press the FEED/ESC key

Note:
Each Discount program can be deleted individually using the method above.

Clerk Information (S13 Mode)

This mode allows you to enter Clerk Information such as Clerk No., Clerk Name and Clerk Password.

Note:
To use the Clerk function you must assign the function key of Logon/Logoff.

1. Start at the normal weigh mode screen

2. Press the Mode Key twice

3. Press the number 1 key then the number 3 key then press the X key
   Note: This has the same results as pressing the X key twelve times.

4. Press the Print/* key

5. Enter the Clerk Number
   Ex.) Enter Clerk Number1 by pressing the number one key.
   Press the Print/* key

6. Enter the Clerk Password
   Ex.) Enter 1537 for Clerk Number 1’s password (1537)using the number keys.
   Press the Print/* key

7. Enter the Clerk Job ID Number Ex.)Use 9 as the Clerk Job ID Number by pressing the number nine key.
   Press the Print/* key

8. Enter the Clerk Name
   Ex.) Enter Clerk 1’s Name as MIKE.
   Press the Print/* key
   Press the SAVE key

ShangHai DB Scale Co.,Ltd
No.788 SongXiu Rd, QingPu District, ShangHai, PR.CHINA Tel: 86-21-59757333 Fax: 86-21-59757058 https://www.dbscale.com.cn.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>