STEAMERY Pilo No.1 Fabric Shaver User Manual

: June 5, 2024
: STEAMERY

Table of Contents

How to Use Pilo No.1 Fabric Shaver
Safety Advice
Specification
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Pilo No Fabric Shaver
User Manual

Welcome To Steamery
Let’s make it even easier for you to take care of your clothes.
With sharp strong razor blades and a powerful engine, Pilo No.1
Fabric Shaver is the perfect tool to repair and smooth out a damaged fabric surface.
To learn more about Steamery, our products, and how to take care of your clothes, please visit our website steamerystockholm.com or email us at support@steamery.se/Steamery

Box Content

Pilo No.1 fabric shaver
USB cord
Cleaning tool

How to Use Pilo No.1 Fabric Shaver

Use the usb cable to charge the Pilo No.1 fabric shaver. The button light will turn red to indicate that it is charging.
When the battery is fully charged the button light will turn green. Unplug the device when the charging is completed. It normally takes 5 hours to recharge the battery.
Turn on the machine by pressing the on/off button.
To use it, gently wipe the fabric with the trimmer to remove the fuzz and pilling. If you push the Pilo No.1 Fabric Shaver hard against the fabric, you risk damaging it. Therefore, remember to always try the Pilo No.1 Fabric Shaver on a small, less notable spot before going over the whole piece. Please note that Steamery does not take responsibility for this kind of damage.
Please note: to eliminate the risk of damaging the fabric, always place the garment on a flat surface before you start using the Pilo No.1.
When the on/off button starts to flash in red, the device needs charging.
Turn off the machine by pressing the on/off button.
It is important to remove the fuzz from the machine. To do so, turn off the machine and then remove both the storage bin and the blade protector, then use the little brush for easy cleaning. Remember to remove the fuzz around the razor blades as well. Pay extra attention that no hairs or threads are around the spinning six.
In case the machine is subjected to excessive pressure or if the motor gets blocked, the machine will automatically shut off, in order to protect the motor from overheating and breaking. You will be able to turn the machine back on after 2 seconds when its components have cooled down.

STEAMERY Pilo No.1 Fabric Shaver - Fig 1

Safety Advice

Always unplug the device from the power outlet after charging and before you clean it.
Do not use the Pilo No.1 fabric shaver on the garment you are wearing.
To prevent fabric damage:
• Remember to always test the Pilo No.1 fabric shaver on a small and less notable spot before using it on the whole garment.
• Special attention should be carried out when going over fragile and sensitive parts such as the area around buttons, zippers, sewing parts, and loose threads, etc.
• Trim fine fabrics gently!
Do not charge Pilo No.1 Fabric Shaver if the power cord is damaged.
The Pilo No.1 Fabric Shaver should not be used as a toy.
Children should not use, clean, and maintain Pilo No.1 Fabric Shaver.

Specification

Origin: China
Certificates: CE/RoHS
Importer: Steamery AB
Power Voltage and Frequency: DC 5V 1A, 5W
Auto Power Off: Supported when removing the stainless steel razor cover
Control: Two levels (Off, On)
Battery charging time: 5 hours
Operation: 50 minutes of continuous fabric removing

Steamery One-Year Limited Warranty Summary
Steamery warrants the included hardware product and accessories against defects in materials and workmanship for one year from the date of original retail purchase. Steamery does not warrant normal wear and tear, lack of maintenance, or damage caused by accident or abuse. To obtain service, please call or email Steamery. Call charges and international shipping charges may apply depending on location. If you submit a valid claim under this warranty, Steamery will repair, replace, or refund your Pilo No.1 Lint Shaver at its own discretion. Warranty benefits are in addition to rights provided under local consumer laws. You may be required to furnish proof of purchase details when making a claim under this warranty.

© 2022 Steamery. Designed by Steamery in Stockholm. Printed in China.
steamerystockholm.com