STEAMERY Pilo 1 Fabric Shaver Lint Remover User Guide
- June 13, 2024
- STEAMERY
Table of Contents
STEAMERY Pilo 1 Fabric Shaver Lint Remover
Product Information
The fabric shaver is a versatile tool designed to remove pilling from various types of fabrics, including knits, cushions, armrests, and blankets. It features a Pilo machine that effectively eliminates lint and fuzz from garments, leaving them looking refreshed and new.
Product Usage Instructions
- Ensure that the fabric shaver, specifically the Pilo machine, has been cleaned thoroughly. Remove any leftover lint or fuzz from the previous use.
- Place the garment on a flat surface.
- Press the On/Off button to activate the fabric shaver.
- Carefully circle the areas with pilling, applying light pressure initially.
- If working on a heavily pilled garment, periodically check the container and empty it when necessary. You may notice a slight decrease in machine speed or hear unusual sounds when it requires emptying.
- Congratulations! Your garment is now free of pilling.
Cleaning Instructions
- Unscrew the plastic ring located on the fabric shaver.
- Gently lift off the perforated metal mouthpiece (be cautious as there are sharp razors underneath).
- Use the provided brush to remove any fuzz or debris from the razors. Exercise caution while performing this step.
- Ensure all fuzz has been removed from the fabric shaver.
- Clean the razors using the small brush provided.
- Once everything is clean and no fuzz remains, reattach the razor blades and securely fix the mouthpiece back in place.
- Screw the plastic ring back onto the fabric shaver.
- Your fabric shaver is now ready to be used again.
We believe the fabric shaver will become one of your best friends in maintaining the pristine condition of your garments. Good luck!
The Pilo Fabric Shaver – also called debobbler– has three precision-made razor blades and a surprisingly strong motor, that actually originates from an electric razor. The high speed helps eliminate the risk of pilling getting stuck in the shaving membrane. Thus, you can safely shave off lint and pilling.
Using Instructions
Q/A
“Can I Use the Fabric Shaver on all fabrics?”
- Short answer: Yes, you can.
The longer version … be careful and increase the pressure gradually. By gently trying a small part of the fabric you will easily find out if the material is on the too delicate side or not. Keep in mind, in our opinion no materials are too delicate for our product. A small doze of common sense will take you far – there is, of course, a limit to how big the pilling can be – a heavy rug may be too much even for the Pilo.
“Can I remove pilling from furniture?”
- Definitely! Not just knits attracts pilling, so can cushions, armrests or blankets.
How to Use a Pilo
- Make sure the Pilo has been cleaned properly, remove leftover lint and fuzz from the last time you used the machine.
- Put your garment on a flat surface.
- Press the On/Off button and start circling the areas with pilling carefully.
- Increase pressure gradually.
- If you’re working on a heavily pilled garment you need to check the container and empty it after a while (you normally feel and hear when the machine starts to run a little slower).
- Ta-dah!
Cleaning
Clean Pilo Fabric Shaver
- When you notice that the Pilo is working slow – or if it stops running even if the indicator lamp is green the container is full. Time to clean!
- Unscrew the plastic ring.
- Remove the mouthpiece in perforated metal by gently lifting it off (be careful, underneath are sharp razors!). Use the brush to remove the razors. Careful!
- Remove all fuzz.
- The razors can be cleaned with the small brush.
- Everything clean? No fuzz left anywhere? Then you’re done. Put the razor blades back and attach the mouthpiece and screw back the plastic ring. Now it’s ready to be used again.
- We strongly believe this device has a fair chance of entering your list of best friends. Good luck!
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>