Aroma ADX-30 WATTS AMPLIFIER FOR ELECTRONIC DRUMKIT Owner’s Manual
- June 5, 2024
- Aroma
Table of Contents
ADX-30 WATTS AMPLIFIER FOR ELECTRONIC DRUMKIT
Owner’s Manual
E-DRUMS AMP ADX-30
Thank you for purchasing Aroma E-drums Amp ADX-30.
WARNING! IMPORTANT SAFETY INSTRUCTIONS
Please pay much attention to the following before using the amp
-
Use only the power cord attached. If you purposed to replace the power code, please consult qualified electricity personnel or your dealer.
-
Never break off the ground pin on the power supply plug.
-
Never attempt to bypass the fuses or replace the fuse with incorrect values.
-
Do not attempt to repair this product by yourself, as that opening or removing the amp covers may expose you to dangerous voltage points or other risks.
Refer all services to qualified service personnel. -
If any of the below happened, please repair the amp by qualified personnel, such as the power cord is damaged, or the power plug damaged, or liquid or metal parts been into the amp, or the amp been exposed to rain or moisture, etc..
-
Do not use or store the amp in circumstances of high humidity.
-
The amp is not water-proof, do not place any container with liquid on the amp.
-
The power cord should be unplugged if the amp is not to be used for a long period of time.
-
Protect the power cord from being walked on or pinched for safety.
-
Make sure that the electrical outlet, which is connected to the amp power plug, is grounded.
Keep this manual for later reference.
PANEL CONTROLS AND FUNCTION
Front Panel
Rear Panel
- Drum Sound Input— Signal input from electronic drums,6.35mm gauge jack
- Drum Sound Input—–Signal input from electronic drums,3.5mm gauge jack
- AUX Sound Input ——————————Signal input, 3.5mm gauge jack
- Drum Volume—————————– Knob to control drums sound volume
- Aux Volume————————————–Knob to control music volume
- Drum Bass——————————- Knob to control low frequencies level
- Drum Treble ————————— Knob to control high frequencies level
- Bluetooth————————————-Bluetooth ON/ OFF
- Power ————————————————————- Power switch
- Power Socket —————————————————-Power socket
WARNING: This product is only suitable for one working voltage, please check whether the local AC voltage is consistent with the voltage range marked on the back of the product before using it. Wrong voltage may cause malfunction.
BLUETOOTH FUNCTION
To connect Bluetooth, press and hold the amp Bluetooth button till that the Bluetooth LED light is up. Turn on the Bluetooth function on the mobile phone and automatically search for Bluetooth devices. If the device name “ADX-30 AUDIO “is found, it means that the device has been found. Please click to connect. When the connection is successful, a “di” sound will be heard.
SPECIFICATIONS
Power: 30W
Input: 220V~50Hz
Consumption: ≤50W
Speaker: 6.5-inch woofer + 2.5-inch tweeter
Bluetooth version: 5.0
Net weight: 7.6kg
Product dimension: 389×326.5x284mm
Package dimension: 450x405x350mm
Packing list: ADX-30 x1, AC cable x1, manual x1
FCC Warning:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules These limits are
designed to provide reasonable protection against harmful interference in a
residential installation This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications, However,
there is no guarantee that interference will not occur in a particular
installation.
Suppose this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on. In
that case, the user is encouraged to try to correct the interference by one
or more of the following measures:
-
Reorient or relocate the receiving antenna
Increase the separation between the equipment and receiver -
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
-
Consult the dealer or an experienced radio/TV technician for help
Caution Any changes or modifications to this device not explicitly approved by
the manufacturer could void your authority to operate this equipment This
device complies with part 15 of the FCC Rules Operation is subject to the
following two conditions (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation This equipment complies with
FCC radiation exposure limits set forth for an uncontrolled environment This
equipment should be installed and operated with a minimum distance 2Ocm
between the radiator & your body.
aromamusic.cn
follow us
facebook.com/AromaMusicGear
info@aromamusic.cn
Designed and engineered by AROMA MUSIC