Pro-ject E1 Setup Audio System User Guide

: June 5, 2024
: Pro-Ject

Table of Contents

Setup Guide
- Getting started:
- How to connect your model and possible setups:
Warranty: Terms and Conditions
Commercial Use
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Pro-ject E1 Setup Audio System

Setup Guide

Getting started:

Make sure to have enough space to unpack your turntable.
Always unpack and set up in a clean environment.
Please Do NOT throw away the packaging! If you need service or want to return your product, please send it in the original packaging including all inserts. In case of damage due to alternative packaging your dealer cannot guarantee a full refund.
Complete manual:
www.project-audio.com/en/product/e1

Unpack all items from accessory bag:

Remove dust cover carton from the box.

Lift the wrapped turntable out of the box.

Unpack power supply

Unpack the platter.

Unpack the turntable.

Put the drive belt on pulley and platter.

Put the platter and felt mat on the turntable.

Remove tonearm twist tie.

Plug in power supply.

Unpack dust cover and slip it on the hinges.

How to connect your model and possible setups:

E1
Connect to any amp with integrated phono amplifier or use an external phono preamp.
Pre-mounted RCA Cable included.
Possible set: Pro-Ject Speaker Box 5 (bookshelf speaker) and Pro-Ject MaiA (stereo integrated amplifier).

E1 Phono
Select Line Out to connect to an amplifier without a phono stage. Select Phono Out if you have an amplifier with a phono stage.
Possible set: Pro-Ject Speaker Box 5 (bookshelf speaker) and Pro-Ject Stereo Box (stereo integrated amplifier).

E1 BT
Choose Line Out to connect to an amplifier without a phono stage. Phono Out if you have an amplifier with a phono stage.

BT pairing
E1 BT is paired automatically with any device with BT receiver.
For restart of the BT transmitter, please turn OFF and ON the BT module by using the switch. BT switch is located on the right side under the chassis. Restart is needed only when there is a change of the BT receiver.

Possible set: Pro-Ject Speaker Box 5 (bookshelf speaker) and Pro-Ject Stereo Box (stereo integrated amplifier).

Need help?
Feel free to contact us. We have experienced partners all over the world. Find your dealer here: www.project-audio.com/en/find-a-dealer/

Service
Should you encounter a problem which you are not able to alleviate or identify despite the above information, please contact your dealer for further advice. Only when the problem cannot be resolved there should the unit be sent to the responsible distributor in your country.
Warranty repairs will only be affected if the unit is returned correctly packaged. For this reason we recommend keeping the original packaging.
Never return a record player without making sure that is it safely disassembled and correctly packaged in the original packaging according to the diagrams on the last page of this user guide. Please remove these parts and pack them separately: lid, counterweight, anti-skating weight and belt. Fit the cartridge protection cap and the transport lock for the tonearm tube, prior to carefully packaging the record player.

Warranty
The manufacturer accepts no responsibility for damage caused by not adhering to these instructions for use and/or by transportation without the original packaging. Modification or change to any part of the product by unauthorized persons, release the manufacturer from any liability over and above the lawful rights of the customer.

Warranty: Terms and Conditions

A warranty is valid only for products purchased from an authorized Pro-Ject Audio Systems retailer or dealer.
This warranty offer is limited to the repair of the equipment (which could be a repair or replacement at our discretion, neither of which affects your original warranty).
Neither transportation or any other costs, nor any risk for removal, transportation and installation of products is covered by this warranty.
A warranty is only valid for the original owner. It is not transferable.
To validate your warranty, you will need to provide the original sales invoice or other proof of ownership and date of purchase.
Warranty must be claimed within two years of purchase from an authorized dealer. After this period of time, the warranty will expire.
The legal warranty obligation exists in addition to this warranty and is not limited by this warranty.

A Pro-Ject Audio Systems warranty relates to claims of defects in materials and/or workmanship at the time of purchase. It does not cover:

Deterioration of component parts, the nature of which is to become worn or depleted with use, such as batteries and headphone ear pads, drive belts and cartridges.
Damages caused by incorrect installation, connection or packing.
Damages caused by any use other than the correct use described in the user manual, negligence, modifications, or use of parts that are not made or authorized by Pro-Ject Audio Systems.
Damages caused by faulty or unsuitable ancillary equipment.
Damages caused by accidents, lightning, water, fire heat, war, public disturbances or any other cause beyond the reasonable control of Pro-Ject Audio Systems and its appointed distributors.
Products where the serial number has been altered, deleted, removed or made illegible.
Repairs or modifications that have been executed by an unauthorized person.

Commercial Use

Faults caused due to using domestic products in commercial environments or on commercial scales are not covered by warranty. This turntable is intended for domestic use only. Using them for business applications are done so at your own risk.
Pro-Ject Audio Systems is a Registered Trademark of H. Lichtenegger.
This guide was produced by: Pro-Ject Audio Systems
Copyright © 2022. All rights reserved.
The information was correct at the time of going to press. The manufacturer reserves the right to make changes to the technical specification without prior notice as deemed necessary to uphold the ongoing process of technical development.
Qualcomm aptX is a product of Qualcomm Technologies, Inc. and/or its subsidiaries.
Qualcomm is a trademark of Qualcomm Incorporated, registered in the United States and other countries. aptX is a trademark of Qualcomm Technologies International, Ltd., registered in the United States and other countries.