wanbo T6 Max FullHD 1080P Projector Instruction Manual

wanbo T6 Max FullHD 1080P Projector

Important Safety Precautions

You are recommended to use the projector in a dark room to achieve the best effect.

1. Please dont install in places that direcily blown by cold and wam air of ar-condiioning. water condensation or high temperature may lead to failure to the machine
2. Ensure adequate ventilation and vent are not blocked to prevent heat accumulation inside the machine.
3. Please prevent forelgn matters Such as nalls or paper scraps trom talling into the machine. Do not insert any metals such as iron wire or screwdriver into the machine. Please turn off the power immediately and turn to professional technician to remove it if any foreign matters fall into the body.
4. Do not place any liquid on this machine to avoid risk of electric leakage.
5. Please use soft packaging materials to move the projector, install lens protection cover to protect the jens trom scraping, in addition, keep the projector from viojent vibration.
6. Areas near the exhaust will become hot during and aiter we use the projector, it may lead to scald if we touch with hand.
7. Please dont watch lens directdly when it’s on so as to protect our eyes from damage.

Note:

• Don’t open the shell to prevent electric shock, Please turn to qualiífied professional maintenance personnel for the maintenance as there are no parls in the machine that users can repair themseves.
• Don’t expose the machine to rain or molsture so as to prevent mistire or electric shock.

IMPORTANT SAFETY PRECAUTIONS

Proprojector Part name and Function 

Installation and Adjustment

Device Power-On and Power-Off

Power-On/OFF
Method 1: Press the power button on the projector to start.
Method 2: Point the remote control to the projector and press the power key to turn it on. Shut Down
Short press the power button or the “O” key on the remote control, once shutdown prompt box appears, short press the power button or the power key on the remote control again.

Adjusts Focal Length

Focus Length: When the picture image is blurred (indicated as the right picture), adjust the lens focus through “C””O” on the remote control to achieve the best definition.

Basic Parameters 

REMOTE CONTROL

Mobile Phone with the Same Screen

The following steps can help us to display content of our mobile phone to projection screen synchronously through wire less wifi, just enjoy with a larger picture (Applicable for intelligent Android version only).
Equipment requirements: support devices above IoS6 and Android 5.3 Min. Android Devices User Instruction

1. Ensure the Phone and Projector are under the same WIFI (For Android Only).
2. Open Eshare’of the projector.
3. Choose the device with the same name with Eshare to complete mirror.

Mobile Phone with the Same Screen

lOS Devices User Instruction

1. Ensure the Phone and Projector are under the same WIFI (For lOS Only).
2. OpenEshare”of the projector.
3. Open “AirPlay’/ “Mirror’of the Phone.
4. Choose the device with the same name with Eshare to complete mirror.

CAUTION: Possitbly hazardous optical radiation emtted from this product. Do not stare at the operating lamp. Maybe harmful to the eyes.
CAUTION: UV emitted from this product. Eye or skin irritation may result from exposure. Use appropriate shielding.
CAUTION: IR emitted from this product. Do not stare at operating lamp. May be harmful to the eyes.

Mobile Phone with the Same Screen
How to be with the same screen for iPhone under status of No Wifi

1. If there has no WIFI, firstly open 4G network of iPhone, then open WIFl hot spot in the “Settings” interface of the phone.
2. Collect iPhone’s hot spot WIFI for the projector.
3. Open “Eshare”.
4. Open “Airplay”/ “Screen Mirror”
5. Find the projector and click.

Mobile Phone Projection
How to “push” contents to the projector
Note: Advantage of push is it does not affect normal use of the mobile phone.

1. Ensure the Phone and Projector are under the same WIFI.

2. Open video software of the mobile phone and finds the TV push icon in the four corners (it’s usually on the top right or on the bottom right) (Each APPs have different push icon design).
   Note: Not all video software have function of push.

3. Click this icon to push videos to the projector. At the same time, we can have other. operations on the phone, it will have no conflict. 

Singal Source Setting
Enter Setting interface in the main screen and select input source. Enter into AV/HDMI signal channel, Press “OK” ” to switch input source.
Note:
If you want to returm to the previous layer, please press the return key; If you want to retum to the main interface, please press the main screen key.

U Disk Support Format

Projection Distance Reference

Cleaning Method
Please make sure the power plug is unplugged before cleaning.
Do not use pesticides or other volatile chemicals on the projector or lens. Do not let
rubber or Vinyl producls contacts the projector for a long time, which will damage the
coating and make it peeled off.

• Clean the Projector
  

1. Wipe with a soft, dry cotton cloth. If it’s dirtied seriously, we can wipe with soft cloth that stuck with diluted neutral detergent, then dry with a clean and dry cloth. Please pay more attention if used with chemical fiber cloth.
2. Don’t use thinner, benzene or any other sovents to avoid quality reduction or coating peeling off etc.
3. A brush can be inserted into the front of the vacuum cleaner to remove dirt inside the vents. Please don’t use vacuum cleaner with no connector, or lean with vents direcdy.
4. Please dont scrape the machine with nails or any other hard objects so as to avoid scratches.

• Lens Cleaning

1. Clean lens with the same method for camera lens: please use professional blow dryer or cleaning paper for glasses, ensure lens are not scratched.

• Inlet and Outlet Dust Cleaning

1. Dust in the inlet and outlet will prevent ventilation and increase the internal temperature, which will cause defect.
2. Disconnect power line after turn off the projector.
3. Clean the exterior ith an electric vacuum cleaner, please install brush head adapter on the vacuum cleaner first. Kindly take note: don’t use vacuum cleaner with no connector or brush.

Poisonous and Harmful Substance, Element Name and Content 

Warranty Card

1. We offer “three guarantees for this product, One year warranty for non- artificial damaged since purchasing (subject to purchase record).
2. We will provide warranty service for any default caused by product technical reasons during warranty period.
3. Following situations are out of the range of guarantee:
4. Accessories out of the mainframe
5. Unauthorized disassembly and repair without our consent.
6. Damage that caused by exlernal force and other natural disasters.
7. Please fil this card and contact your distributor when products have quality problem
8. This warranty is limited to product maintenance during the warranty period, no other liability

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>