BLACK+DECKER BHDC201 Portable Space Heater User Manual

BLACK+DECKER BHDC201 Portable Space Heater

SPECIFICATIONS

Voltage: 120V, 60Hz
Power Consumption: 1500W
Unit Size (WxDxH): 7.3” x 6.3” x 9.2”

PRODUCT REGISTRATION

Thank you for purchasing our BLACK+DECKER product. This easy-to-use manual will guide you in getting the best use of your heater.

Remember to record the model and serial numbers. They are on a label on the rear.

Staple your receipt to your manual.
You will need it to obtain warranty service.

SAFETY INFORMATION

DANGER- Immediate hazards which WILL result in severe personal injury or death
WARNING – Hazards or unsafe practices which COULD result in severe personal injury or death
CAUTION – Hazards or unsafe practices which COULD result in minor personal injury

IMPORTANT SAFETY INSTRUCTIONS

WARNING – When using electrical appliances, basic safety precautions should be followed, including the following

When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following:

1. Read all instructions before using this heater.

2. This heater is hot when in use. To avoid burns, do not let bare skin touch hot surfaces. If provided, use handles when moving this heater. Keep combustible materials, such as furniture, pillows, bedding, papers, clothes, and curtains at least 3 feet (0.9m) from the front of the heater and keep them away from the sides and rear.

3. Extreme caution is necessary when any heater is used by or near children or invalids and whenever the heater is left operating and unattended.

4. Always unplug the heater when not in use.

5. Do not operate any heater with a damaged cord or plug or after the heater malfunctions, has been dropped, or is damaged in any manner. Discard the heater or return the heater to an authorized service facility for examination, electrical or mechanical adjustment, or repair.

6. Do not use outdoors.

7. This heater is not intended for use in bathrooms, laundry areas, and similar indoor locations. Never locate the heater where it may fall into the bathtub or other water container.

8. Do not run the cord under the carpeting. Do not cover the cord with throw rugs, runners, or similar coverings. Do not route the cord under furniture or appliances. Arrange the cord away from the traffic area so that it will not be tripped over.

9. To disconnect the heater, first, turn the controls off, then remove the plug from the outlet.

10. Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock or fire, or damage the heater.

11. To prevent a possible fire, do not block air intake or exhaust in any manner. Do not use it on soft surfaces, like a bed, where openings may become blocked.

12. A heater has hot and arcing or sparking parts inside. Do not use it in the areas where gasoline, paint, or flammable liquids are used or stored.

13. Use this heater only as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock, or injury to persons.

14. CAUTION: Always plug heaters directly into a wall outlet/receptacle. Never use an extension cord or relocatable power tap (outlet/power strip).

15. This heater draws 12.5 amps during operation. To prevent overloading
    a circuit, do not plug the heater into a circuit that already has other appliances working.

16. The output of this heater may vary and its temperature may become intense enough to burn exposed skin. Use of this heater is not recommended for persons with reduced sensitivity to heat or an inability to react to avoid burns.

17. Don’t leave the heater unattended.

SAVE THESE INSTRUCTIONS

HOUSEHOLD USE ONLY

ELECTRICAL REQUIREMENTS

This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit into a polarized outlet only one way. If the plug does not fit into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to modify the plug in any way.
NOTE: Neither BLACK+DECKER nor the dealer can accept any liability for damage to the product or personal injury resulting from failure to observe the electrical connection procedures.

WARNING: To reduce the risk of electric shock, do not use an extension cord.

WARNING – RISK OF FIRE

It is important the plug fits tightly into the wall outlet.
If the plug does not fit securely and appears loose, it should not be used. Have a licensed electrician replace the receptacle.

OVERHEAT SAFETY FEATURE

This heater is equipped with an overheat safety feature. When the heater’s internal components reach a certain temperature that could cause overheating and possible fire, the heater will automatically shut off. If this should occur, please contact our Customer Satisfaction Center at 844-299-0879.

WARNING – It is normal for the power cord to feel warm to the touch; however, a loose fit between the outlet and the plug may cause overheating of the plug. If this occurs, try inserting the plug into a different outlet. Contact a qualified electrician to inspect the original outlet for damage.

TIP-OVER SAFETY FEATURE

This heater is equipped with a tip-over safety feature. Once the heater is tipped over, an internal switch will automatically shut the heater off. Once the heater is restored to an upright position, the heater will reset. To continue operation, turn the heater back on.

SET UP & USE

PARTS & FEATURES

OPERATING INSTRUCTIONS

Place the heater on a firm, level surface and plug the unit directly into a 120 V AC electrical outlet.

NOTE: Only operate the heater in an upright position.

1. Turn the thermostat knob clockwise (right) direction until it reaches the maximum setting (+). The knob needs to be turned past the minimum setting (–) until you hear a clicking noise in order to operate the Fan Only, “I” Low Heat, or “II” High Heat Settings.
2. Turn the heat control knob clockwise (right) from the position to the , I (Low 750 watts) or II (High 1500 watts) Heat settings.

The power indicator light turns on when either the FAN, LOW or HIGH setting is selected.
When the desired temperature/comfort level is reached, lower the thermostat knob until the heater stops operating. The thermostat will automatically maintain the desired temperature level by cycling the heater on and off.

NOTE: Turning the TEMPERATURE control knob clockwise will increase the temperature setting.

Turn the fan/heat control knob to to shut off the unit.

CARE & CLEANING

MAINTENANCE

1. Turn the power off before cleaning.

2. Unplug the unit and let it cool completely.

3. To keep the heater clean, the outer shell may be cleaned with a soft, damp cloth. You may use a mild detergent if necessary. After cleaning, dry the unit with a soft cloth.
   CAUTION: DO NOT let the liquid enter the heater.

4. DO NOT use alcohol, gasoline, abrasive powders, furniture polish, or rough brushes to clean the heater. This may cause damage or deterioration to the surface of the heater.

5. DO NOT immerse the heater in water.

6. Wait until the unit is completely dry before use.

STORAGE

Store the heater in a cool, dry location when not in use. To prevent dust and dirt build-up, use the original packaging to repack the unit.

TROUBLESHOOTING & WARRANTY

BEFORE YOU CALL FOR SERVICE

IF THE HEATER/FAN FAILS TO OPERATE:

1. Check to make sure that the heater/fan is plugged in securely. If it is not, remove the plug from the outlet, wait 10 seconds, and plug it in again securely.
2. Check for a blown circuit fuse or a tripped main circuit breaker. If these seem to be operating properly, test the outlet with another appliance.
3. Check if the electricity to the main power switch in the back of the unit appears to be working.
4. Make sure the heater is in the upright position.

NOTE: For the heater to function properly, the desired temperature on the heater must be set a few degrees higher than the temperature in the room. If the unit seems to not be heating properly, increase the desired temperature on the heater to fully engage the heating elements.

IF NONE OF THE ABOVE SOLVES THE PROBLEM, CONTACT A QUALIFIED TECHNICIAN. DO NOT TRY TO ADJUST OR REPAIR THE HEATER/FAN YOURSELF.
CUSTOMER SERVICE

IMPORTANT

DO NOT RETURN THIS PRODUCT TO THE STORE
If you have a problem with this product, please contact the BLACK+DECKER Customer Satisfaction Center at 844-299-0879 or service@appliance.com
DATED PROOF OF PURCHASE, MODEL #, AND SERIAL # REQUIRED FOR WARRANTY SERVICE

LIMITED WARRANTY

Any repair, replacement, or warranty service, and all questions about this product should be directed to BLACK+DECKER at 844-299-0879 from the USA or Puerto Rico.

BLACK+DECKER warrants to the original purchaser that the product will be free from defects in material, parts, and workmanship for the period designated for this product. The warranty commences the day the product is purchased and covers up to a period of 1 year (12 months) for labor/1 year (12 months) for parts (manufacturing defects only).

BLACK+DECKER agrees that it will, at its option, replace the defective product with either a new or remanufactured unit equivalent to your original purchase during the warranty period.

Exclusions: This warranty does not apply if any of the following conditions exist:

1. The appearance or exterior of the product has been damaged or defaced, altered or modified in either design or construction.
2. The product’s original serial number has been altered or removed, or cannot be readily determined.
3. Damage is due to a power line surge, or connection to an improper voltage source.
4. Damage is due to general misuse, accidents, or acts of God.
5. Repair attempts were made by unauthorized service providers; parts other than genuine parts were used; or parts were obtained from unauthorized service companies.
6. The product was transferred from the original owner.
7. The product was purchased as refurbished, like new, or second-hand, or with “As-Is” or “Final Sale” terms.
8. The product was used in a commercial or rental setting.
9. The product was used in settings other than ordinary households or used other than in accordance with the provided instructions.
10. Damage is due to improper installation.

The following costs are not covered under this warranty:

1. Transportation and shipping costs associated with the replacement of the unit.
2. Service calls to instruct you how to use your product.
3. Service calls to repair or replace the house fuse, reset a circuit breaker, or correct the wiring in the house.
4. Service calls are required due to improper installation.

REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY OF THE CUSTOMER; BLACK+DECKER SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT, EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW. ANY IMPLIED WARRANTY OF MERCHANTABILITY OF FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED TO THE DURATION OF THE WARRANTY.

Some states do not allow the exclusion or limitations of incidental or consequential damages, or limitations on how long the warranty lasts. In these cases, the above exclusions or limitations may not apply to you. This warranty gives you specific legal rights and you may also have other rights which vary from state to state.

Obtaining Service: To obtain service, product literature, supplies, or accessories please call 844-299-0879 to create a ticket for exchange/repair. Please make sure to provide the date of purchase, model number, and a brief description of the problem. Our customer service representative will contact you or send detailed return instructions.

BLACK+DECKER does not warrant that the appliance will work properly in all environmental conditions, and makes no warranty and representation, either implied or expressed, with respect to the quality, performance, merchantability, or fitness for a particular purpose other than the purpose identified within this user’s manual. BLACK+DECKER has made every effort to ensure that this user’s manual is accurate and disclaims liability for any inaccuracies or omissions that may have occurred. Information in this user’s manual is subject to change without notice and does not represent a commitment on the part of BLACK+DECKER. BLACK+DECKER reserves the right to make improvements to this user’s manual and/or to the products described in this user’s manual at any time without notice. If you find information in this manual that is incorrect, misleading, or incomplete, please contact us at 844-299-0879.
W Appliance Co.
1356 broadway
New York, NY 10018

FAQ’s

How does the BLACK+DECKER BHDC201 Portable Space Heater work?

The BLACK+DECKER BHDC201 Portable Space Heater uses an electric heating element to generate heat. It draws in cool air, passes it over the heating element, and then releases warm air into the surrounding space.

What is the heating capacity of the BHDC201 Portable Space Heater?

The heating capacity of the BLACK+DECKER BHDC201 Portable Space Heater is typically measured in British Thermal Units (BTUs) or watts. Please refer to the product specifications or user manual for the specific heating capacity of this model.

How do I control the temperature on the BHDC201 Portable Space Heater?

The BHDC201 Portable Space Heater usually features adjustable temperature settings. It may have a thermostat control or a temperature dial that allows you to set and maintain your desired temperature.

Does the BHDC201 Portable Space Heater have a safety feature to prevent overheating?

Yes, many models of the BLACK+DECKER BHDC201 Portable Space Heater include built-in safety features, such as overheat protection. These features automatically shut off the heater if it reaches a certain temperature to prevent overheating and potential hazards.

Can I use the BHDC201 Portable Space Heater in bathrooms or other moist environments?

It is generally not recommended to use the BHDC201 Portable Space Heater in bathrooms or other areas with high moisture levels. Moisture can damage the heater and pose a safety risk. Refer to the user manual for specific usage guidelines.

What are the specifications of the BLACK+DECKER BHDC201 Portable Space Heater?

The specifications of the BLACK+DECKER BHDC201 Portable Space Heater are as follows: - Voltage: 120V, 60Hz - Power Consumption: 1500W - Unit Size (WxDxH): 7.3” x 6.3” x 9.2”

What safety precautions should I take when using the BLACK+DECKER BHDC201 Portable Space Heater?

When using the BLACK+DECKER BHDC201 Portable Space Heater, you should follow these safety precautions: - Keep combustible materials, such as furniture, pillows, bedding, papers, clothes, and curtains at least 3 feet (0.9m) from the front of the heater and keep them away from the sides and rear. - Extreme caution is necessary when any heater is used by or near children or invalids and whenever the heater is left operating and unattended. - Always unplug the heater when not in use. - Do not operate any heater with a damaged cord or plug or after the heater malfunctions, has been dropped, or is damaged in any manner. - Do not use outdoors. - This heater is not intended for use in bathrooms, laundry areas, and similar indoor locations. Never locate the heater where it may fall into the bathtub or other water container. - To prevent a possible fire, do not block air intake or exhaust in any manner. Do not use it on soft surfaces, like a bed, where openings may become blocked. - A heater has hot and arcing or sparking parts inside. Do not use it in the areas where gasoline, paint, or flammable liquids are used or stored. - Use this heater only as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock, or injury to persons.

What should I do if the BLACK+DECKER BHDC201 Portable Space Heater overheats?

The BLACK+DECKER BHDC201 Portable Space Heater is equipped with an overheat safety feature. When the heater’s internal components reach a certain temperature that could cause overheating and possible fire, the heater will automatically shut off. If this should occur, please contact the BLACK+DECKER Customer Satisfaction Center at 844-299-0879.

What should I do if the BLACK+DECKER BHDC201 Portable Space Heater tips over?

The BLACK+DECKER BHDC201 Portable Space Heater is equipped with a tip-over safety feature. Once the heater is tipped over, an internal switch will automatically shut the heater off. Once the heater is restored to an upright position, the heater will reset. To continue operation, turn the heater back on.

How do I clean the BLACK+DECKER BHDC201 Portable Space Heater?

To keep the BLACK+DECKER BHDC201 Portable Space Heater clean, the outer shell may be cleaned with a soft, damp cloth. You may use a mild detergent if necessary. After cleaning, dry the unit with a soft cloth. DO NOT let the liquid enter the heater. DO NOT use alcohol, gasoline, abrasive powders, furniture polish, or rough brushes to clean the heater. This may cause damage or deterioration to the surface of the heater. DO NOT immerse the heater in water. Wait until the unit is completely dry before use.

What should I do if my BLACK+DECKER BHDC201 Portable Space Heater fails to operate?

If your BLACK+DECKER BHDC201 Portable Space Heater fails to operate, you should: - Check to make sure that the heater/fan is plugged in securely. If it is not, remove the plug from the outlet, wait 10 seconds, and plug it in again securely. - Check for a blown circuit fuse or a tripped main circuit breaker. If these seem to be operating properly, test the outlet with another appliance. - Check if the electricity to the main power switch in the back of the unit appears to be working. - Make sure the heater is in the upright position. If none of the above solves the problem, contact a qualified technician. DO NOT try to adjust or repair the heater/fan yourself.

What is the warranty period for the BLACK+DECKER BHDC201 Portable Space Heater?

The warranty period for the BLACK+DECKER BHDC201 Portable Space Heater is up to a period of 1 year (12 months) for labor/1 year (12 months) for parts (manufacturing defects only).

What are the power requirements for the BHDC201 Portable Space Heater?

The power requirements for the BLACK+DECKER BHDC201 Portable Space Heater depend on the specific model. Typically, it operates on standard household electrical power, such as 120 volts AC.

Does the BHDC201 Portable Space Heater come with a warranty?

Warranty coverage may vary by region and seller. Check the product packaging or contact BLACK+DECKER or the authorized retailer for information on the warranty terms and conditions.

Can the BHDC201 Portable Space Heater be used for both heating and cooling?

No, the BHDC201 Portable Space Heater is designed specifically for heating purposes and does not have a cooling function.

Video – Product Introduction

Download This PDF: BLACK+DECKER BHDC201 Portable Space Heater User Manual

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>