SCARLETT SC-VC80R10 Robotic Vacuum Cleaner Instruction Manual
- June 4, 2024
- SCARLETT
Table of Contents
SCARLETT SC-VC80R10 Robotic Vacuum Cleaner
DESCRIPTION
- Body
- Power button
- Illumination ring
- Upper cover
- Upper cover button
- Adapter plug outlet
- Anti-drop sensor
- Front small wheel
- Battery cabinet
- Dusting paper holder
- Intake
- Side brush holes
- Place for inner dust bin
- Inner dust bin
- Filter
- Rechargeable battery
- Adapter
- Dusting paper
- Side brushes 4 pcs.
- Hole cap
IMPORTANT SAFEGUARDS
- Read this instruction manual carefully to prevent any unit damage or injure when using.
- When using this appliance, basic precautions should always be followed:
- Before the first use of the appliance check that the voltage indicated on the rating label corresponds to the mains voltage in your home.
- For home use only. Do not use for industrial purposes.
- To reduce the risk of electric shock, do not use outdoors or on wet surfaces. Do not immerse unit or cord in any liquids.
- To avoid deforming of plastic components of the appliance or fire accident, never leave the appliance exposed to direct sun light or near any heater.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliances by a person responsible for their safety.
- Children should be supervised to ensure that they do not play with the appliance.
- Never use the vacuum cleaner without filters.
- Do not attempt to repair, adjust or replace parts in the appliance. Repair the malfunctioning appliance in the nearest service center.
- If the product has been exposed to temperatures below 0ºC for some time it should be kept at room temperature for at least 2 hours before turning it on.
- The manufacturer reserves the right to introduce minor changes into the product design without prior notice, unless such changes influence significantly the product safety, performance, and functions.
- Date of production is indicated on the unit and/or on the packing materials and in accompanying documents.
- Use this product in temperature from +5 °С до +40 °С
- Do not sit on top of this product or attach an object on the top of it. Beware of children or pets while the product is in operation.
- Never use the product to clean up combustible or highly volatile liquids such as gasoline.
- While the product is in operation, make sure all doors leading outside are closed.
- Charging adaptor is for indoors use only.
- Do not recharge the product if the battery cord or plug is damaged.
- Never touch the charger, plug or cable with damped hands.
- Please take out the battery when it is not in use for a long time.
- The battery is to be disposed of safety
RECHARGING BATTERY
- Obzerve the polarity and put the battery into the vacuum cleaner to battery cabinet.
- Connect the adapter output into the DC jack, and then plug into power socket of the other end
- During charging and when the battery is full charged blue light flashes in the illumination ring
- When the product runs out of power, LED indicator will turn red
- To ensure the best performance and life span of the battery, please charge the product for 4hrs continuously
PREPARATION
- Mini Robotic Vacuum Cleaner is equipped with functions suitable for cleaning up floor surfaces of home and office, such as wood, tile, and linoleum
- The device is not suitable for plush/deep-pile carpets.
- Clear up all items lying around the room that could catch in the brushes or nozzle or which could obstruct the device while cleaning. Be particularly sure to not leave anyplastic bags on the fl oor.
- Make sure that the device is not able to come into contact with cables, cords or tassels, e.g. of curtains, table cloths or carpets. If necessary, fold the edges of carpets with tassels under the carpet.
- Remove all items that could be knocked over (e.g. vases, small lamps, decorative items).
- There should be at least 40 cm of distance between two objects (e.g. wall and shelf) in order for the device to pass through.
- The device could get stuck under pieces of furniture if it does not have the necessary clearance. Block the path e.g. with fl ower pots that are heavy enough to prevent being knocked off.
- Open the battery cabinet cover as shown on.
- Inser charged battery into the battery cabiner and close the cover. Make sure the cover clips well located in its positon.
- Disassemble the dusting paper holder as shown in.
- Flat the dusting paper on clean floor or desk. Put the holder on the dusting paper with contact on the smooth side.
- Fold back the dusting paper one edge into the zigzag clip of the dusting paper holder. Strain the other edge of the dusting paper and fold back it the same as above.
- Put the holder with dusting paper under the main body
- Put side brush at its place on the bottom and then push to fix it. And vice visa—to pull up, side brush will be taken out.
NOTE
- The brushes are not suitable for long-pile carpets
- Before operate the product, if there is no dusting paper on the holder, please remove the dusting paper holder from the main body.
- Maintenance
- After the preparation work described above, make sure that filter is in its place. Using the unit without a filter in it may cause damage of the unit.
- Place the product in a room with much free space, and then power it on to do cleaning work
- Press the power button, the unit will start moving automatically.
CARE AND CLEANING
DUST BIN CLEANING
-
Open the upper cover by pressing the button
-
Take out the dust bin out of the vacuum cleaner.
-
Open the lid of dust bin by putting your finger into the dust bin groove and gripping to take it out
-
Take out the inner filter
-
Empty the dirt in the dust bin
-
Rinse the dust bin with tap water. Do not wash it in washing machine, dish-washing machine or another machine.
-
Periodically clean the filter with a soft bristle brush.
-
Reinstall the filter and the dust bin lid once they get dried.
-
Put back the dust bin into the cleaner
NOTE: -
Before put back the dust bin, please make sure the PE pad (function as non-return valve) in the dust bin is well located. Recheck the filter also before operate the product. If operate the product without filter, it might cause malfunction.
ATTENTION: -
After repeated use for some time, dirt and dust might accumulate around the intake of the product, to ensure its best cleaning efficiency and constant airflow it should be cleaned periodically Vacuum cleaner or cord should never be immersed into water or any liquids.
WARNING! -
Be sure to clean the container after each cleaning.
-
Never use the vacuum cleaner without installed filter and with damaged or dirty filter. Otherwise, dust will fall into the motor and cause damage to the vacuum cleaner.
-
Don’t use the vacuum cleaner if the container is filled to the mark “MAX”. When the container is filled, dirty air clogs up the vacuum cleaner filter and the engine can overheat and disable.
-
Don’t use the vacuum cleaner for cleaning of material debris such as cement, whitewash, plaster, metal shavings and etc. These particles cause to the engine damage.
-
Don’t wash vacuum cleaner parts in a dishwasher or a construction machine.
STORAGE
- Fulfil all the steps from parts CARE AND CLEANING.
- Store the unit in dry cool place or in the original box.
TROUBLESHOOTING
- If all solutions given above don’t work for you, please re-set the robot by switching on the power button
The symbol on the unit, packing materials and/or documentation means used electrical and electronic units and the battery’s should not be toss in the garbage with ordinary household garbage. These units should be passed to a special receiving point.
- For additional information about the actual system of garbage collection address to the local authority.
- Valid utilization will help to save valuable resources and avoid negative work on the public health and environment which happens with incorrect using garbage.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>