ViewSonic VPC25 Slot in PC module User Guide

: June 5, 2024
: Viewsonic

Table of Contents

Interface
Installation
**2-1
Input Selection
USB Connection
Specifications
Regulatory and Service Information
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

VPC25/VPC27
Slot in PC module
User Guide

Model No.	P/N	Model No.	P/N
VS18617	VPC25-W53-P1	VS18617	VPC25-W33-P1-1T
VS18617	VPC25-W53-P1-1T	VS18617	VPC25-W53-P2
VS18617	VPC25-W33-P1	VS18617	VPC27-W55-P2

Thank you for choosing ViewSonic®
As a world-leading provider of visual solutions, ViewSonic® is dedicated to exceeding the world’s expectations for technological evolution, innovation, and simplicity. At iewSonic®, we believe that our products have the potential to make a positive impact in the world, and we are confident that the ViewSonic® product you have chosen will serve you well.
Once again, thank you for choosing ViewSonic®!

Interface

VPC-P1

VPC-P2

Item	Description
1	WIN antenna interface
2	Anti-theft lock
3	Connect the display to a DisplayPort connector
4	USB 2.0 interface
5	Standard RJ45 (10M/100M/1G) Internet connection interface

Installation

**2-1

2-2
2-3
Internet Connection
**

Input Selection

To select an Input Source:

Press INPUT on the remote control, press the setting button on the front panel or press the setting icon from the toolbar to display the Input Settings menu.
Press to select PC.
Press on the remote control, or touch the input source.
Press on the remote control, or touch a blank area outside of the menu to exit.

USB Connection

Specifications

10 ports| 1 x Display Port
1 x HDMI
1x LAN
2 x USB 2.0 (5V/0.5A) 4 x USB 3.0 (5V/0.9A) 1 x USB type C
1 x Earphone
1 x Microphone
---|---
Power| 100V-240V AC 50/60HZ
Operating Conditions| Temperature Humidity Altitude| 32°F to 113°F (0°C to 45°C)
10% — 90% non-condensing
0 meter to +5000 meters above sea level
Storage Conditions| Temperature Humidity Altitude| -4°F to 140°F (-20°C to 60°C)
10% — 90% non-condensing
0 meter to +5000 meters above sea level
Dimensions| Physical(mm)| 246.1 x 263.4 x 32.2
Weight| Physical(kg)| 1.95
Power consumption| 95W
Frequency Range and Output Power (Max.)| 2402 to 2480 MHz(BT) 2.0 dBm
2402 to 2480 MHz(LE) 3.73 dBm
2412 to 2472 MHz 17.41 dBm
5150 to 5250 MHz 18.94 dBm
5250 to 5350 MHz 18.94 dBm
5470 to 5725 MHz 18.94 dBm

Regulatory and Service Information

Compliance Information
This section addresses all connected requirements and statements regarding regulations. Confirmed corresponding applications shall refer to nameplate labels and relevant markings on the unit.

FCC Compliance Statement
This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

Warning: You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.
Industry Canada Statement
CAN ICES-003(B) / NMB-003(B)
Contains FCC ID: PD9AX200NG / PD9AX201NG / PD9AX210NG
IC ID: 1000M-AX200NG / 1000M-AX201NG / 1000M-AX210NG
*Choose one of three options.
CE Conformity for European Countries
The device complies with the EMC Directive 2014/30/EU and Low Voltage Directive 2014/35/EU and Radio Equipment Directive (RED) 2014/53/EU.
The following information is only for EU-member states:
The mark shown to the right is in compliance with the Waste Electrical and Electronic Equipment Directive 2012/19/EU (WEEE). The mark indicates the requirement NOT o dispose of the equipment as unsorted municipal waste, but use the return and collection systems according to local law. In all EU member states, the operation of 5150-5350MHz is restricted to indoor use only. This device should be installed and operated with a minimum distance of 20cm between the radiator and your body.
Declaration of RoHS2 Compliance
This product has been designed and manufactured in compliance with Directive 2011/65/EU of the European Parliament and the Council on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS2 Directive) and is deemed to comply with the maximum concentration values issued by the European technical Adaptation Committee (TAC) as shown below:

Substance	Proposed Maximum Concentration	Actual Concentration
Lead (Pb)	0.1%	< 0.1%
Mercury (Hg)	0.1%	< 0.1%
Cadmium (Cd)	0.01%	< 0.01%
Hexavalent Chromium (Cr6±)	0.1%	< 0.1%
Polybrominated biphenyls (PBB)	0.1%	< 0.1%
Polybrominated diphenyl ethers (PBDE)	0.1%	< 0.1%
Bis (2-ethylhexyl) phthalate (DEHP)	0.1%	< 0.1%
Butyl benzyl phthalate (BBP)	0.1%	< 0.1%
Dibutyl phthalate (DBP)	0.1%	< 0.1%
Diisobutyl phthalate (DIBP)	0.1%	< 0.1%

Certain components of products as stated above are exempted under the Annex III of the RoHS2 Directives as noted below:

Copper alloy containing up to 4% lead by weight.
Lead in high melting temperature type solders (i.e. lead-based alloys containing 85% by weight or more lead).
Electrical and electronic components containing lead in a glass or ceramic other than dielectric ceramic in capacitors, e.g. piezoelectric devices, or in a glass or ceramic matrix compound.
Lead in dielectric ceramic in capacitors for a rated voltage of 125V AC or 250V DC or higher.

Indian Restriction of Hazardous Substances
Restriction on Hazardous Substances statement (India). This product complies with the “India E-waste Rule 2011” and prohibits the use of lead, mercury, hexavalent chromium, polybrominated biphenyls, or polybrominated diphenyl ethers in concentrations exceeding 0.1 weight % and 0.01 weight % for cadmium, except for the exemptions set in Schedule 2 of the Rule.
Product Disposal at End of Product Life
ViewSonic® respects the environment and is committed to working and living green. Thank you for being part of Smarter, Greener Computing. Please visit the ViewSonic® website to learn more.
USA & Canada: https://www.viewsonic.com/us/company/green/go-green-with- viewsonic/#recycle-program
Europe:http://www.viewsoniceurope.com/eu/support/call-desk/
Taiwan:https://recycle.epa.gov.tw/
Customer Service
For technical support or product service, see the table below or contact your reseller.
NOTE: You will need the product’s serial number.