soundcore Life Q20 Headphones User Manual

June 5, 2024
Soundcore

Life Q20 Headphones
User Manualsoundcore Life Q20 Headphonessoundcore Life Q20
Headphones - figsoundcore Life Q20 Headphones - fig
1 soundcore Life Q20 Headphones - fig
2

Powering On / Off

soundcore Life Q20 Headphones - fig 3

Power  On| | Press and hold for more than 3 seconds| Flashing blue (Status indicator)
---|---|---|---
Power Off| | Press and hold for 3 seconds| Steady red for 1 second (Status indicator)
ANC On| | Press and hold for more than 1 second| Steady green (NC LED indicator)
ANC Off| | Press and hold for more than 1 second| NC LED indicator off

Pairing

soundcore Life Q20 Headphones - fig 5

Enter Bluetooth pairing mode when Life Q20 is off Press and hold for 5 seconds

| Rapidly flashing blue| Pairing mode
---|---|---
| Steady blue| Connected to a device(but is not playing music)
| OFF(Status indicator)| Connected to a device(playing music)
| Rapidly flashing blue| Connected to a device(Incoming call)

Controls

Bluetooth mode

Bluetooth mode


Press| Play / pause
Note: the status indicator will light up in blue for 2 seconds, then turn off.
Press and hold for 1 second| Next track
Press and hold for 1 second| Previous track
Press| Volume up / down
Default mode| Normal Equalizer
Press the multi-function key twice Note: Press twice again to switch back to Normal Equalizer.| BassUP™(Dual Equalizer)
Press and hold for 1 second| ANC mode (Active noise canceling mode) activation
ANC mode (Active noise canceling mode) deactivation

Active Noise Cancelling mode (ANC) blocks the noise from the surrounding environment while wearing Soundcore Life Q20.

Mobile phone

Press| Answer / End call
Put the current call on hold and answer an incoming call
Press and hold for 1 second| Reject call
Switch between held call and active call
Slow flashing blue (Status indicator)| On a call
Slow flashing blue (Status indicator)| Incoming call
Press and hold for 1 second| Activate Siri / other voice control software

Aux-in

soundcore Life Q20 Headphones - fig 6

Plugging in an audio cable will automatically switch to AUX mode, and Bluetooth mode and ANC will turn off.

Charging Your Headphones

soundcore Life Q20 Headphones - fig 7

Notification sound (Tone) : There are only 2 hours of playtime left. You will hear a voice prompt every 30 minutes.| Low battery
---|---
Flashing red once every 60 seconds (Bluetooth LED indicator)
Steady red (Status indicator)| Charging
Note: Do not switch on Life Q20 while charging.
Off (Status indicator)| Fully charged

Specifications

Specifications are subject to change without notice.

Input 5 V  0.65 A Impedance 16Ω
Charging time 3 hours Driver (full range) 40 mm x 2
Playtime (Bluetooth with ANC mode on) 40 hours Frequency response 16 Hz –

40 KHz
Playtime (Bluetooth with ANC mode off)| 60 hours| Bluetooth version| V 5.0
Playtime (Connected to audio cable with ANC mode on)| 35 hours| Range| 15 m / 49.21 ft
Weight| 268 g / 9.5 oz| |

Customer Service

18-month limited warranty
Lifetime technical support
service@soundcore.com
+1 (800) 988 7973 (US) Mon-Fri 9:00 – 17:00 (PT)
+44 (0) 1604 936200 (UK) Mon-Fri 6:00 – 11:00 (GMT)
+49 (0) 69 9579 7960 (DE) Mon-Fri 6:00 – 11:00
For FAQs and more information, please visit: soundcore.com/support

 @SoundcoreAudio
@soundcoreaudio
@soundcoreaudio

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals