PAPERANG C1S Portable Bluetooth Label Printer User Manual

June 12, 2024
PAPERANG

PAPERANG C1S Portable Bluetooth Label Printer

PAPERANG-C1S-Portable-Bluetooth-Label-Printer-PRODUCT

Product Diagram

  1. Paper cutter blade
  2. Reset button
  3. Micro USB port
  4. Open button
  5. Paper cutter blade
  6. Paper roll adjustment piece
  7. Power button

Using Your Printer

  1. Install the Paperang app (available in Apple App Store and Google Play Store) on your mobile device
  2. Turn on Bluetooth on your mobile device
  3. Press and hold the power button for 3 seconds to turn on the printer
  4. Press the power button twice to print a pairing code
  5. Open the Paperang app and scan the pairing code to connect your printer
  6. Start printing via Paperang app
  7. Tearing off the printout
  8. Replacing the paper roll

Getting more paper rolls

More paper rolls are available on amazon.com

LED Indications

  • Light off
  • Steady green light
  • Flashing green light
  • Power off
  • Standby
  • Charging
  • Flashing green light
  • Flashing red light
  • Steady red light
  • Charging
  • Out of paper or overheating
  • Low power

Specifications

Safety Precautions

  • Always use a 5 USB charger for the thermal printer to prevent any damage or failure
  • Do not use the thermal printer in places of high humidity such as Bathroom
  • Do not allow the thermal printer to get wet, for example, by handling it with wet hands or spilling beverages on them
  • Do not disassemble or modify the thermal printer
  • Do not touch metal parts around the Print Head immediately after printing
  • Do not touch the cutter blade
  • Do not drop or hit the thermal printer
  • Stop using the thermal printer if you notice abnormal odor, heat, discoloration, deformation or anything unusual while using or storing it
  • When the thermal printer is not being used, store it out of the reach of children. In addition, do not allow children to put any thermal printer parts or paper rolls in their mouths. If any object has been swallowed, seek medical attention

FCC Regulatory Conformance

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference.
  2. This device must accept any interference received, including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and the receiver.
  • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/ TV technician for help

NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.

RF Exposure
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
IC regulatory conformance
This device complies with CAN ICES-3 (B) and NMB-3(B).
This device complies with Industry Canada license-exempt RSS standards). Operation is subject to the following two conditions:

  1. this device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation.

Documents / Resources

| PAPERANG C1S Portable Bluetooth Label Printer [pdf] User Manual
C1S, Portable Bluetooth Label Printer, C1S Portable Bluetooth Label Printer, Bluetooth Label Printer, Label Printer, Printer
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals