Shenzhen Qianhai Zhongneng Electronic Technology P75 Pro Wireless Bluetooth Earbuds User Manual
- June 5, 2024
- Shenzhen Qianhai Zhongneng Electronic Technology
Table of Contents
P75 Pro
User Manual
Switch Connection Operation
- When pairing with other devices: open the Bluetooth settings of the mobile phone or other devices —- search for the Bluetooth name ‘P75 pro’ click to connect to Bluetooth.
- Open the charging case cover and take out the earbuds to automatically turn on and pair successfully. Put the earbuds into charging case and close the cover; the earbuds will automatically shut down and enter the automatic charging mode, the earbuds will charge. It will automatically turn off when the battery is fill.
- The left and right earbuds of ‘P75 pro’ wireless earbuds can be connected to other devices separately.
- If the ‘P75 pro’ wireless earbud is not connected to a Bluetooth device for 3 minutes, it will automatically shut down.
- ‘P75 pro’ can be compatible with most Bluetooth terminal devices.
Touch Function Description
- When a call comes in, one tap the left and right earbuds at will to answer the call.
- Reject the call: Long press the left and right earbuds for 1.5 seconds.
Notice: This device does not support the last number re-dial tapping function.
Music Touch Use Instructions
-
Pause/play: tap the left and right earbuds once
-
Last song: tap the left earbud 3 times in a row
-
Next song: tap the right earbud 3 times in a row
-
Volume +: tap the right earbud twice continuously
-
Volume -: tap the left earbud twice continuously
-
Siri voice control: Long press the left and right earbuds for 2 seconds to active Siri voice control mode
(Note: This function must be controlled when the earbuds and the mobile phone are in the Bluetooth connection state) -
Long press the earbuds left and right for 5 seconds to power on and off
-
Switch the game mode: tap the left and right earbuds 4 times in a row (Prompt tone: Gaming on)
-
DUT mode: Before the Bluetooth earbuds is not connected to Bluetooth, tap the left and right earbuds for 5 consecutive times.
Charging Instructions
- Open the charging case cover and take out the earbuds, it will automatically pair and connect to the Bluetooth device that has been connected before
- The whole device has voice prompts
- The P75 pro wireless earbuds has a dual-channel call function, and the left and right earbuds can be connected to different devices separately
- A single earbud can play music for about 5 hours and talk for about 4 hours when fully charged
- The charging base battery capacity is 300mAH pure cobalt, and the earbud battery capacity is 30mAh pure cobalt
- The charging voltage of the charging case is 5V
- Charging power: 40MH
- When the earbud is lower than 30V, it will automatically shut down, indicating that the earbuds needs to be charged in time
- The charging case can charge the earbuds about 5-6 times
- The indicator light flashes green when the charging case is charged, and it lights up when it is full
- Bluetooth version: 5.1
- The Bluetooth distance is: 10m-20m
Notice: Do not puncture or incinerate the battery, the battery does not contain mercury.
Product Overview
- Multi-function touch key
- Outlet
- Charging thimble
- Battery display
- Charging port
Precautions
- Do not treat this product violently, do not squeeze it with heavy objects, and keep it away from high temperature and high humidity environment.
- Keep away from WIFI and routers and other high-frequency transmitting devices, which will affect the signal reception of the machine, causing the sound to be stuck and disconnected.
- Please use the product in an effective environment (10 meters), and there should be no physical obstruction (such as walls, etc.) between the Bluetooth device and the earbuds.
Note: This product can be connected to any Bluetooth-enabled device.
Prompt
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1)This device may not cause harmful interference.
(2)This device must accept any interference received, including interference
that may cause undesired operation.
2.Changes or modifications not expressly approved by the party responsible for
compliance could void the user’ s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a
class B digital device,pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates uses and can radiate radio frequence energy and,if
not installed and used in accordance with the instructions,may cause harmful
interference to radio communications.However,there is no guarantee that
interference will not occur in a particular installation.if this equipment
does cause harmful interference to radio or television reception,which can be
determined by turning the equipment off and on,the user is encouraged to try
to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an autlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>