velleman X1 MT Apple Smart Watch User Manual
- June 5, 2024
- Velleman
Table of Contents
velleman X1 MT Apple Smart Watch
Wireless Connection
REMARKS: Smart watch support full functions based on original Android OS4.4
and above Android mobiles You can check Android mobile version under
Setting/About device, (If Android Sys is lower than OS4.4 like OS4.2 & 4.0,
some functions on Smartwatch can’t work perfectly on Android mobile)
Install APK on Android phone
Search“MT-SMART” from Google play or you can scan the QR-code to download.
1st: Install QR Code Scanner on your Android mobile, 2nd: Open QR Code scanner
to scan the QR Code from Smartwatch, Select “MT-SMART Android Version”
app to download and install
3rd:After APK correctly installed on Android mobile, you can see this icon on
Mobile phone
Connecting Smartwatch with Android mobile
- 1st:Switch on wireless function on both Android phone and Smartwatch
- 2nd: Open MT-SMART app on your mobile
- 3rd: go to Settings—Scan wireless device search your Mobile phone name/model, connect and pair with your Mobile phone (Follow the paring instruction from your mobile)
- 4th: After paired, you can see this icon or and this icon on your Android Mobile)
Means anti-lost function button turned on Means there is some meassage in the notification icon Tips: As Android have a lot of different types smartphone, if you can’t search the device in the app, please change the mode from SPP to GATT.
REMARKS: Smart watch only compatible with Original iOS8.0 or above, if
iPhone Version is lower than iOS8.0, some Smart watch function can’t work
perfectly on iPhone (Please check your iOS version under Setting/General/About
device to see if it is above iOS8.0)
Install APK on iPhone
Search“MT-SMART”from App Store or you can use QR Code scanner to scan
Smartwatch QR code to download and install “MT-SMART iOS Version app”, after
installation,
Connecting Smartwatch with iPhone
- Go to BT, active smart watch wireless function first.
- System connection, Go to iPhone “Settings/BT, Turn on iPhone wireless function, find SM09 device and connect. The watch will receive the BT notice as below, choose “Yes”. (After system connection, you can open iphone “Camera”, enter smart watch “BT Camera” to make remote capture. Same as BT Music.)
- App connection. Enter the “MT-SMART” application/Pair my watch, pair with SM09.
After successfully paired, you can see this icon on the top left corner of Smartwatch, on the APP, you can see the icon turn to on the settings page, on your IPhone you can see below screenshot, which means 100% connected
You can try to test via “find the device” function on Smartwatch so you can
hear your iPhone rings.
Tips: If you can’t pair the watch, please go to setting Wireless —click
on SM09 icon —forget the device. Then back to app to pair the watch again.
PS: Comparing with Android phone connecting, you need to do one more step on
iPhone mobile (System BT connection and App BT connection)
Two Main UI Display
Smartwatch main functions:
Quick Response
This function only support the android smart phone app. After android smart
phone paired with the watch, the app can sync all the data of “Messages” to
the smart watch. You can find the “Quick Response” in the end of message,
click on call back or reply to make a quick response. Please refer to the
below pictures.
Pedometer: This application will calculate the steps when you are walking or
running and will calculate the calories that you have burnt based on the
amount of steps you took, You need to put your personal info like height and
weight in options to calculate your burnt calories. Here you can set your
goals, check your history and reset your steps countdown. Enter the
application and press “Start” to begin. If you want to sync the data, you
should press “Stop” first. (If you always on “Start” status, smart watch will
sync failed) You can see all data also on your mobile “MT-SMART” app, and
enter the personal goal setting from
all the data can be accumulated from last time as below screenshots:
Sedentary remind:
This Application will remind you to get up and move when you have been
sedentary for a predetermined amount of time. Enter the application and select
the amount of time you wish to be sedentary for Tap the Tick icon on the top
right hand corner to confirm your selection. After you selected time a
notification will remind you to get Up and move
Stop Watch
This Feature will help you keep track of any time-based activities. Press the Play/Stop Watch button on the bottom left hand of the screen to start. Press again to stop. Press the time Lapse button the Bottom Right of the screen to split the times.
Sleep monitor:
This feature tracks your movements while you are asleep and then determines the quality of your sleep.Enter the application and press “Start”to begin and press “Stop” when you wake up. Once stopped the time of your sleep will be recorder and the quality will be indicated by either Good or Poor. Press the options icon on the top Right hand corner to access “History and Help”, also this sleep data can be check on MT-SMART app. If you want to sync the data, you should press “Stop” first. (If you always on “Start” status, smart watch will sync failed)
Heart rate monitor
Hear rate monitor is using the most professional green ray technology. There are two ways of heart rate: single time monitor and continuous monitor. Wearing the watch, adjust the tightness to be comfortable (if the strap is too tight the blood circulation will be oppressed; if the strap is too loose it will affect the heart rate monitor data accuracy). Enter in the Heartrate interface click the top right corner icon , and choose single time or continuous testing
Find my device
Use this feature to locate your Smartphone or Smartwatch if you have misplaced
them. To find your Smartphone, go into “Find my Device”application from the
main screen and tap “Start”. A beeping noise will then sound on your
Smartphone To find your Smatwatch, go into “MT-SMART APP” and click on “Find
Device”. A beeping noise will then sound on your Smartwatch Must be pai red
and within connection range of 10meter open area
Siri
Open Siri app on Smartwatch to control mobile phone functions like voice call, open camera, music etc., this function only suitable for iPhone.
Gesture function
- 1st Raise up the hand to wake-up the screen: Click and enter into gesture function system. Turn on Wake-up gesture. When the Smartwatch is in stand-by, just raise up your hand and after 2 seconds the screen will be turned on with clock.
- 2nd: Shake screen to pick-up the phone: Click and enter into gesture function system. Turn on Shake to answer the call and Flip to mute incoming calls. When a call is incoming, just shake the screen 1 time towards to your chest: the calling will be mute. If you shake the screen 2 times, you have picked-up the phone call.
- 3rd: Shake screen to turn the menu page automatically: Click and enter into gesture function system. Turn on Shake the main menu page. When your Smartwatch is on menu page, just rotate your wrist of 30-45° to turn the menu page automatically.
Sync functions
Time sync
Smartwatch time syn (Setting/Clock/Time Sync is defaulted as turned on, once
the smartwatch is paired with mobile phone, time and date will be syn with
mobile)
Messages sync
- When mobile received new message like SMS, news, email, wechat,what’sapp will push to Smartwach “Notification” Click to read all notifications except the expression is not readable PS: Android sys, Smartwatch will push SMS directly to messages, but for iOS SMS only arrive on Notification menu instead of messages
- Click any message under ”Messages” menu after you connect with android smartphone, select anyone to read and can call back the sender or send quick message reply
Dialer
Use this application to make phone calls Enter the desired phone no. and tap
the call button to make the phone call. To use symbols next to the number,
press and hold the number and the symbol will be typed on the screen
Calls
When you are Receiving an incoming phone call, a Green and Red circle will
appear on your Smartwatch. Drag the Green circle to the right to answer the
phone call and drag the Red circle to left to end the phone call
NOTE: On IOS devices, you may not initially be able to communicate
through your Smartwatch, You will need to change the communication source to
K88 to be able to communicate through your Smartwatch as below screenshot
Phone book
This Application allows you to access your Smartphone’s phone book from your
Smartwatch. You can make calls through the phone book by selecting the Name or
Number that you want to call by tapping the call button. Slide the screen from
Right to Left to quick search contacts by the first letter of their name 6.BT
music
This application allows you to play the music on your Smartphone through your
Smartwatch, you can increase and decrease the volume, and change the music
tracks via the buttons on either side of the music icon in the application
NOTE: The volume on your Smartphone will affect the volume of the sound
on your Smartwatch. Ensure that volume on your Smartphone is set at an
appropriate level.
Remote capture
This Application allows you to remotely take pictures on your phone from your
Smartwatch.Direct the camera on your phone at the desired image point and
press the capture button on your Smartwatch to capture the picture NOTE: iOS
you need to open “Camera” firstly on iPhone, so this function works
File manager
This Application allows you to manage the files on your Smartwatch.Tap on
Watch and swipe Up and Down to access photos, Videos. Audio and other files.
Calendar
Access this Application to view the current Day and Month, Swipe Up and Down
to see the different Days and Months
Weather report
After you paired with the android smart phone, you can install weather report
and click on “MT-SMART” app on your mobile, it is under My application/Weather
menu, after installed you can setup and save the city you selected on
Smartwatch, so you can check the weather report on Smartwatch as below
All logos, brands and products names above are registered trademarks of their respective trademarks holders.