Plugin Alliance API 2500 Lindell SBC Stereo Buss Compressor User Manual
- June 5, 2024
- Plugin Alliance
Table of Contents
Plugin Alliance API 2500 Lindell SBC Stereo Buss Compressor
Overview
Toolbar
A/B
Gives access to two different settings, for quick comparison. The selected
memory appears in blue. All the parameter changes or preset loads affect only
the selected memory.
Copy Button ( >)
When clicked, the current memory is copied to the other memory.
Menu
Common commands
- Set in all instances » copies the parameter value to all the instances of the plugin in the session. This can also be achieved by [shift] + clicking on a menu option.
- Save as default » sets the current parameter value as the default one when the plugin opens. This can also be achieved by [alt] + clicking a menu option.
About
Shows the plugin version and credits information.
Calibration
You can chose the calibration level here (the mapping between the real digital
dBFS level and the virtual dBu level in the simulated circuits).
The calibration level is often expressed as XX dBFS = 0 VU (or +4 dBu).
Oversampling
You can select the oversampling mode here. Higher oversampling reduces
aliasing problem but makes the processing n-times more CPU intensive.
UI Zoom
The Lindell SBC UI size can be reduced using this menu options from 80% to
150% of its normal size.
Note:
That the plugins size will never get larger than 80% of the screen
width/height, regardless of the UI Zoom setting. This means that the higher
values (80%, 90%, 100%) will result in the same plugin size on a small
notebook screen for instance.
Noise
The plugin adds a very low amount of noise that is usually inaudible (the
noise floor). It can be turned off here.
**Compressor
**
Thresh.
Compression threshold. The plugin starts compressing when the audio RMS level
exceeds this value.
Attack
Time to compress after the signal level increased above the threshold.
Ratio
Compression ratio above the threshold [ 1.5:1, 2:1, 3:1, 4:1, 6:1, 10:1,
Infinity:1].
Release
Time to recover from compression after the signal has dropped below the
threshold.
Link
Link
At 0%, each channel is compressed independently. At 100% each channel sees the
same mixed side chain.
HP
A high pass filter in inserted in the link circuit. Only the fast compression
changes are linked between channels.
LP
A low pass filter in inserted in the link circuit. Only the slow compression
changes are linked between channels.
HP + LP
A band pass filter is inserted in the link circuit.
Meters
Meters
The first meter shows the left channel level and the second one the right
channel. The top scale is for the IN or OUT VU level display, with 0 = 0 dB VU
= +4 dBu. The bottom scale is for the GR (gain reduction) setting, in dB.
IN
The meters show the input VU level, measured before compression.
GR
The meters show the amount of gain reduction that the compressor applies on
each channel.
OUT
The meters show the output VU level, measured after compression.
**Additional Features
**
THD
Total harmonic distortion. Use it to adjust the amount of analog harmonic
distortion, with 0dB being the normal emulated hardware distortion level.
Nuke
NUKE is a creative overload function. Use this switch to create effect
compression on drum room mics, heavy rock vocals and other sources that you
want to really squash.
SC HPF
Side chain high pass filter. In the full anti-clockwise position, the filter is
OFF.
Mix
Controls the amount of unprocessed (0%) and processed (100%) signals mixed
together at the compressor output.
Tone
Knee
Selects the knee shape of the compression curve.
Filter
Filters the compressor side chain signal to compress less the low frequencies
and more the high frequencies. This helps to keep a natural frequency response
after compression.
Style
The compressor can measure the signal level at the input (Feed Forward mode)
or the output (Feed Back mode).
Output
Gain
Makeup gain when manual gain is active.
Compress
Enables or disables compression. When it’s off, the signal still goes through
the analog circuit and transformer.
Bypass
Completely bypasses the compressor.
Manual
Manual gain. Disabled the automatic gain reduction compensation and enables to
control manually the makeup gain with the gain knob.
Credits
Emmanuel Dubecq – LSR audio
- Design
- Programming
- Graphics
- Circuit modeling
Tobias Lindell – Lindell Audio
- Design
- Tests and tuning
- Presets
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>