BURLEY 960047 2004 1-Wheel Stroller Kit Owner’s Manual
- June 5, 2024
- BURLEY
Table of Contents
Burley Stroller Kit Owner’s Instruction and Safety Manual
For D’Lite, ™ Solo, ™ Encore, ™ Cub, ™ Honeybee, ™ and Tailwagon
Stroller kit
Congratulations!
By purchasing the Burley Stroller Kit, you’ve increased the fun and excitement
that you and your family can have with your Burley trailer.
Please go to www.burley.com or contact us at
541-687-1644 or
[email protected] to register your warranty
information.
IMPORTANT: IT IS vERY IMpORTANT FOR YOU TO FAMILIARIzE YOURSELF WITH
YOUR STROLLER ATTACHMENT BY READINg THIS MANUAL BEFORE USE. IF YOU HAvE ANY
qUESTIONS, pLEASE CONTACT US.
WARNING! FAILURE TO OBSERVE ALL OF THE SAFETY GUIDELINES IN THIS MANUAL
AND YOUR BURLEY TRAILER MANUAL COULD RESULT IN AN ACCIDENT AND SERIOUS INJURY
OR DEATH.
Safety Guidelines
- Consult your child’s trailer manual for trailer safety guidelines.
- Always use the handlebar tether.
- When placing children or cargo into the trailer, keep the load centered and in front of the axle.
- Always set the parking brake before releasing the handle. Make sure the parking brake is properly adjusted and working before use, especially after changing the tires or removing the wheels.
- This product was designed for use on surfaces that are meant for walking. Do not use it on stairs, escalators, or other uneven surfaces. Never use it with inline or roller skates.
- Never leave your children unattended.
Tools Required:
(2) 10mm open-end wrenches
(1) 25mm (or 1”) wrench
(1) 5mm hex wrench
Installation
-
Remove tow bar from the trailer.
-
Remove nut and bolt from tow bar end. Discard bolt and lock nut. The safety strap and D-ring will be re-installed. Figure 2
-
Slide stroller kit onto tow bar. Figure 3
-
Place D-ring and safety strap on supplied 6mm x 50mm bolt. Line up holes in the stroller kit, tow bar, and flex connector and install the bolt. Secure with nut. Install two shorter bolts through the pivot assembly side and secure them with nuts. Figure 4
-
Around the handlebar center, slide the tether strap end through a small loop on another end of the strap and tighten securely. Photo 1
-
Slide tow bar into trailer receptacles and line up front tow bar hole with rear receptacle hole. Insert retaining pin through both holes and lock retaining hoop securely. Figure 5
-
Test tracking adjustment by pushing trailer. Trailer should roll straight.
To Adjust Tracking
- Tighten the knob to secure the stroller wheel in the “Stroll” position. See Figure 6
- Loosen bolt using 5mm hex wrench. Figure 6
- Turn to bush using a 25 mm (or 1”) wrench so that the stroller wheel is vertical when viewed from the front.
- Fine-tune as necessary, so that the trailer rolls straight.
- Tighten bolt.
To Convert from Strolling to Trailering
-
Engage the parking brake and tighten the knob to secure stroller wheel in “Bike” position. Figure 7
-
Line up rear tow bar hole with rear receptacle hole. Insert retaining pin through both holes and lock retaining hoop securely. Figure 8
-
Re-install the tow bar and hitch it on the bike.
WARNING! WHEN CONvERTINg THIS ATTACHMENT FOR TRAILERINg, MAKE SURE THAT STROLLER WHEEL IS IN PROPER POSITION BEFORE ATTACHINg TRAILER TO YOUR BICYCLE. DO NOT USE THIS PRODUCT WITHOUT A RETAINING PIN AND SAFETY STRAP PROPERLY INSTALLED. FAILURE TO FOLLOW THE INSTRUCTIONS IN THIS MANUAL AND YOUR TRAILER MANUAL CAN CAUSE AN ACCIDENT RESULTINg IN SERIOUS INJURY.
Maintenance
- Lubricate stroller wheel assembly twice a year for normal use, or monthly if used in wet or salty conditions.
- Inspect handle, receivers, parking brake, and wheel monthly.
- Contact Burley to replace any damaged parts.
Burley Accessory Limited Warranty
This Burley accessory is warranted from the date of purchase against defects
in materials and workmanship as follows: fabric parts for one year, frame and
plastic parts for two
years. Your original dated sales or delivery receipt showing the date of
purchase is your proof of purchase.
If a defect in materials or workmanship is discovered during the Limited
Warranty period, we will, at our sole option, repair or replace your product
at no cost to you. This warranty is only valid in the country in which the
product was purchased.
The Limited Warranty extends only to the original retail purchaser of this
product and is not transferable to anyone who obtains ownership of the product
from the original purchaser.
The Limited Warranty does not cover claims resulting from misuse, failure to
follow the instructions, installation, improper maintenance, and use, abuse,
alteration, involvement in an accident, and normal wear and tear.
The Limited Warranty does not cover products that are used in rental
operations and Burley will not be liable for any incidental or commercial
damages relating to such use.
TO THE GREATEST EXTENT PERMITTED BY LAW, THIS LIMITED WARRANTY IS EXCLUSIVE
AND IN LIEU OF ANY OTHER WARRANTY, WRITTEN OR ORAL, INCLUDING BUT NOT LIMITED
TO ANY EXPRESS OR IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE. The duration of any implied warranties, including any
implied warranty of merchantability or fitness for a particular purpose that
may exist during the express warranty period, is expressly limited to the
limited warranty period. Some states and countries do not allow limitations on
how long an implied warranty lasts; therefore, the above limitations and
exclusions may not apply to you.
THE CUSTOMER’S EXCLUSIVE REMEDY FOR BREACH OF THIS LIMITED WARRANTY OR OF ANY
IMPLIED WARRANTY OR OF ANY OTHER OBLIGATION ARISING BY OPERATION OF LAW OR
OTHERWISE SHALL BE LIMITED AS SPECIFIED HEREIN TO REPAIR OR REPLACEMENT, AT
OUR SOLE OPTION. IN ANY EVENT, RESPONSIBILITY FOR SPECIAL, INCIDENTAL, AND
CONSEQUENTIAL DAMAGES IS EXPRESSLY EXCLUDED.
Burley Accessory Limited Warranty Continued
Some states do not allow the exclusion or limitation of incidental or
consequential damages, so the above limitation or exclusion may not apply to
you.
This Limited Warranty gives you specific legal rights, and you may have other
rights that vary from state to state or country.
For warranty service or replacement part information for the USA or Canada,
please contact Burley directly by calling
800-311-5294 or emailing
[email protected]. For warranty service or
replacement part information outside the USA and Canada please contact the
place of purchase for warranty service. Please be prepared to provide the
product model, serial number, and a description of the warranty issue. Some
replacement parts may be available for purchase after this limited warranty
expires. Please visit us at www.burley.com or call us
at 541-687-1644 for more information.
BURLEY
DESIGN, LLC
Eugene, OR 97402
PH 541. 687.1644 800.311.5294 FAX 541.687.0436
[email protected] •
www.burley.com
© 2007 Burley Design LLC
Burley is a registered trademark of Burley Design LLC
Rev 01/11. 170053 manual stroller kit 08 r2