Nilfisk 110005533 Nommo Tap Water Station Instruction Manual
- June 5, 2024
- Nilfisk
Table of Contents
Nilfisk 110005533 Nommo Tap Water Station
User guide
- The machine must only be operated by instructed personnel.
- Follow the instructions from the supplier of detergents.
- Always wear suitable clothing and footwear.
- Never direct the water jet towards people, pets or electrical installations.
- Never block the release of the spray handle.
- Always activate any locking device on the spray handle when replacing nozzles.
- Only use the water from the system for cleaning purposes.
Start/Preparing
-
Make sure the ball valve at the end of the blue hose is closed. The valve handle is perpendicular to the hose in the close position.
-
Turn on the water supply to the unit .
-
Pull back the valve sleeve. Insert the nozzle. Release the valve sleeve. Pull on the end of the nozzle to make sure the nozzle is securely connected to the ball valve. If not, repeat the previous steps until the nozzle I securely con-nected to the ball valve.
a) The foam operation requires the WHITE nozzle. Rinsing and sanitizing operations require the BLUE nozzle. Both nozzles connect to the ball valve in the same manner. -
Turn the selector switch on the front of the unit to the desired operation.
-
Point the ball valve and noz-zle at the desired location.
-
To open the ball valve handle clockwise. The valve is fully open when the handle is parallel to the hose.
-
Apply foam, rinse water or sanitizer.
Change cleaning agent
Stop
Procedure