ARMATURA EP20 All Weather Outdoor Multi-Tech Smart Reader User Guide
- June 13, 2024
- ARMATURA
Table of Contents
ARMATURA EP20 All Weather Outdoor Multi-Tech Smart Reader
The EP20CKQ reader is one of the most compact multi-frequency RFID readers available that supports over 100 RFID card types and both NFC and Bluetooth Low Energy credentials. Installs on Single-Gang. European-standard gang box and Asian standard boxes to fit all kings of installation environments
Parts Included
Make sure your box contains everything listed. If any pieces are missing,
contact your dealer. Please save the original box and packing materials if you
ever need to ship your device.
-
Explorer Series – EP20C/CK/CQ/CKQ Reader (1pc)
-
Quick Start Guide (1pc) and Mounting Template (1pc)
-
Mounting Plate (1pc)
-
Screwdriver (1pc)
-
grub screw/Countersunk KA3.6 x 1.57 inches (40mm) self-tapping screws (4pcs) and Anchors (4pcs) – for mounting directly to a wall (no junction box)
-
Torx screw TM3 x0.24 inches (6mm) (1pc) – for fixing the reader to the mounting plate
Recommended Parts(not supplied) -
cable 5-10 conductor (Wiegand) 4 conductor Twisted Pair Over-All Shield and UL approved, Belden 3107A or equivalent (OSDP)
-
Certified LPS DC power supply
-
Metal or plastic junction box
-
drill with various bits for mounting hardware Mounting hardware
ARMATURA EP20 All Weather Outdoor Multi-Tech Smart Reader
The EP20CKQ reader is one of the most compact multi-frequency RFID readers available that supports over 100 RFID card types and both NFC and Bluetooth Low Energy credentials. Installs on Single-Gang. European-standard gang box and Asian standard boxes to fit all kings of installation environments
Parts Included
Make sure your box contains everything listed. If any pieces are missing,
contact your dealer. Please save the original box and packing matenals if you
ever need to ship your device.
-
Explorer Series – EP20C/CK/CQ/CKQ Reader (1pc)
-
Quick Start Guide (1pc) and Mounting Template (1pc)
-
Mounting Plate (1pc)
-
Screwdriver (1pc)
-
grub screw/Countersunk KA3.6 x 1.57 inches (40mm) self-tapping screws (4pcs) and Anchors (4pcs) – for mounting directly to a wall (no junction box)
-
Torx screw TM3 x0.24 inches (6mm) (1pc) – for fixing the reader to the mounting plate
Recommended Parts(not supplied) -
cable 5-10 conductor (Wiegand) 4 conductor Twisted Pair Over-All Shield and UL approved, Belden 3107A or equivalent (OSDP)
-
Certified LPS DC power supply
-
Metal or plastic junction box
-
drill with various bits for mounting hardware Mounting hardware
The EP20CKQ reader is one of the most compact multi-frequency RFID readers available that supports over 100 RFID card types and both NFC and Bluetooth Low Energy credentials. Installs on Single-Gang. European-standard gang box and Asian standard boxes to fit all kings of installation environments
Parts Included
Make sure your box contains everything listed. If any pieces are missing,
contact your dealer. Please save the original box and packing matenals if you
ever need to ship your device.
- Explorer Series – EP20C/CK/CQ/CKQ Reader (1pc)
- Quick Start Guide (1pc) and Mounting Template (1pc)
- Mounting Plate (1pc)
- Screwdriver (1pc)
- grub screw/Countersunk KA3.6 x 1.57 inches (40mm) self-tapping screws (4pcs) and Anchors (4pcs) – for mounting directly to a wall (no junction box)
- Torx screw TM3 x0.24 inches (6mm) (1pc) – for fixing the reader to the mounting plate
Recommended Parts(not supplied)
- cable 5-10 conductor (Wiegand) 4 conductor Twisted Pair Over-All Shield and UL approved, Belden 3107A or equivalent (OSDP)
- Certified LPS DC power supply
- Metal or plastic junction box
- drill with various bits for mounting hardware Mounting hardware
Product Overview
- LED Indicator
- QR Code Scanner
- Touch Button
- Mounting Hole
- Card Resoing Area
- Tamper Switch
Install The Reader On The Wall
- Attach the mountain remote sent me wall by inches from the ground (adjustable) and oral holes according to the mounting paper
- Secure the mounting plate on the wall with the wall mounting screws.
- After passing the wires through the wiring hole and connected and then attach the device to the mounting plate from top to bottom.
- Fasten the device to the mounting plate with a security screw
Note: The installation method of the EP20C series is the same Only the EP20CKQ is used as an example, and will not be repeated here again
Reader Connection
The EP20CKQ series can communicate with the control panel via either RS-485 (OSDP) or Wiegand.
Connection via Wiegand
Connection via RS-485 (OSDP)
Frequency Bands And Maximum Output Power
Certificate Information
FCC
Hereby, Armatura LLC declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/ 53/EU. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
Warning
Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
Note : This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the Supplier’s Declaration of Conformity Unique Identifier
- reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 7.87 inches (20cm) between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.”
Trade Name : Smart Reader
Model No.: EP20CKQ
Responsible Party – U.S. Contact Information
US Company Name: Armatura LL
Address: 190 Bluegrass Valley Parkway Alpharetta, GA 3005, USA
Internet contact information: www.armatura.us the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
ARMATURA LLC
www.armatura.us
Copyright © 2022 ARMATURA LLC. All rights reserved.
E-mail: sales@armatura.us
Please select text to grab.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>