Alca PLAST A116-1200 Solomodul Hidden Installation System Instruction Manual
- June 5, 2024
- Alca PLAST
Table of Contents
Alca PLAST A116-1200 Solomodul Hidden Installation System Instruction
Manual
Spare Parts A16P:
ATTENTION!
In case of any difficulties while mounting the installation system, please
address a professional service. It is necessary to use the noise isolation M91
for mounting the installation. If you don’t use it, the claim for replacement
won’t be accepted.
Pre-wall installation system – Mounting instructions
ATTENTION! Anchor type depending on floor material applied. Supplied
anchors are suitable for solid concrete. It is necessary to use the anchors –
012 mm.
Spare parts A06
Small volume flushes adjustment.
Producer fixtures small flushing on 3 I. Adjusting on 3,5 I flushing is
possible after regulation of float – see figure.
Large volume flushes adjustment.
Producer fixtures large flushing on 6 I. Adjusting on 9 I flushing is possible
after regulation of control lever – see figure.
Spare parts
ATTENTION! Use Teflon band, sealing cord or sealing compound to seal the thread!
Suspended WC connection
Is not included in the package and should be bought separately.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>