Altronix T2428100CP220 AC Power Supply Installation Guide
- June 3, 2024
- Altronix
Table of Contents
Altronix T2428100CP220 AC Power Supply
Overview
T2428100CP220 AC power supply provides power for electronic power supplies and equipment, including security, access control, and surveillance devices
Specifications
- Input: 220VAC 50/60Hz, 0.5A.
- Output : 24VAC @ 4A or 28VAC @ 3.5A supply current. In-line fuse via rated @ 3.5A/250V
Installation Instructions
-
Mount T2428100CP220 in desired location.
-
Connect the AC (220VAC 50/60 Hz) to the black and red flying leads of the transformer
-
Measure output voltage before connecting device. This helps avoiding potential damage.
For 24VAC configuration use brown and yellow leads, for 28VAC configuration use brown and black leads.
WARNING: This installation should be made by qualified service personnel and should conform to the National Electrical Code and all local codes
Enclosure Dimensions (H x W x D approximate): 8.5” x 7.5” x 3.5” (215.9mm
x 190.5mm x 88.9mm)
Altronix is not responsible for any typographical errors. Product
specifications are subject to change without notice. 140 58th Street,
Brooklyn, New York 11220 USA | phone:
718-567-8181 | fax:
718-567-9056
website : www.altronix.com
e-mail : info@altronix.com
Lifetime Warranty
IIT2428100CP220 – Rev. 090905